Tin-antimony sulfide nanocomposites were prepared via hydrothermal synthesis and a N2 reduction process for use as a negative electrode in a sodium ion battery. The electrochemical energy storage performance of the battery was analyzed according to the tin-antimony composition. The optimized sulfides exhibited superior charge/discharge capacity (770 mAh g-1 at a current density of 100 mA g-1) and stable lifespan characteristics (71.2 % after 200 cycles at a current density of 500 mA g-1). It exhibited a reversible characteristic, continuously participating in the charge-discharge process. The improved electrochemical energy storage performance and cycle stability was attributed to the small particle size, by controlling the composition of the tin-antimony sulfide. By optimizing the tin-antimony ratio during the synthesis process, it did not deviate from the solubility limit. Graphene oxide also acts to suppress volume expansion during reversible electrochemical reaction. Based on these results, tin-antimony sulfide is considered a promising anode material for a sodium ion battery used as a medium-to-large energy storage source.

Flexible zinc-air batteries have many merits, including low cost, high safety, environmentally friendliness applicability, etc. One of the key factors to improve the performance of flexible zinc-air batteries is to use a gel electrolyte. In this study, gel electrolytes were synthesized from potato, sweet potato, and corn starch. In a comparison of each starch, the corn starch-based gel electrolyte showed the highest discharge capacity of 12.41 mAh/cm2 in 20 mA and 6.47 mAh/cm2 in 30 mA. It also delivered a higher specific discharge capacity of 7.06 mAh/cm2 than the other materials after 100° bending. In addition, the electrochemical impedance spectroscopy (EIS) was analyzed to calculate the ionic conductivity. The potato, sweet potato, and corn starch-based gel electrolytes showed electrolyte resistances (Re) of 0.306, 0.298, and 0.207 Ω, respectively. In addition, the corn starch-based gel electrolyte delivered the highest ionic conductivity of 0.121 S cm-1 among the other gel electrolytes. Thus, the corn starch-based gel electrolyte was verified to improve the performance of flexible zinc-air batteries

시설재배지 고추를 가해하는 꽃노랑총채벌레(Frankliniella occidentalis)를 대상으로 미끌애꽃노린재(Orius laevigatus)를 이용한 생물적 방 제가 검토되고 있다. 그러나 대상 해충의 빠른 집단 성장은 화학 살충제의 투입이 때에 따라 요구된다. 본 연구는 화학 살충제와 천적의 이상적 종합 방제를 구현하기 위한 목적으로 선택성이 높은 살충제 선발 및 이들 살충제 처리 이후 미끌애꽃노린재의 안전한 재투입 시기를 결정하기 위해 수행 되었다. 첫째로 꽃노랑총채벌레에 방제 효과가 높은 상용 살충제가 선발되었다. 총 17종류의 상용 살충제 가운데 5종류(pyriproxyfen+ spinetoram, abamectin, spinosad, acetamiprid, chlorpyrifos) 주성분을 갖는 상용 살충제가 꽃노랑총채벌레에 우수한 방제효과를 주는 약제로 선발되었다. 이들 5종류의 살충제에 대해서 미끌애꽃노린재의 감수성 반응은 꽃노랑총채벌레와 상이하였다. 특별히 아바멕틴과 스피네토람이 유 기인계 또는 네오니코티노이드에 비해 상대적으로 낮은 독성을 보였다. 이들 5종류의 살충제 처리 이후 잔류 독성을 미끌애꽃노린재를 이용하여 생물검정한 결과 유기인계 및 네오니코티노이드 약제는 비교적 오랜 기간 독성을 유지하지만, 아바멕틴과 스피네토람 약제의 경우 3일 이후에는 대상 천적에 피해를 주지 않는 것으로 나타났다. 이러한 잔류독성결과는 LC-MS/MS를 이용한 농약 잔류량 화학분석을 통해 뒷받침되었다. 이상 의 결과는 높은 밀도로 증가한 꽃노랑총채벌레에 대해서 이 해충에 살충성이 높은 아바멕틴 또는 스피네토람의 약제를 살포하고 이후 3일 지나 미 끌애꽃노린재의 투입을 통해 대상 해충의 평균 밀도를 경제적피해수준 이하로 유지할 수 있다는 종합방제 기술을 제시하고 있다.

This study aimed to evaluate the germination characteristics, -glucan and antioxidant contents, and antioxidant activity of naked oat according to germination temperature (20, 25, and 30oC) and time (24, 48, and 72 h). Sprout length was highest at 25oC, and the rotten degree was increased as the germination temperature and time increased. The -glucan content of naked oat increased after 24 h of germination at all temperatures and then decreased by 72 h of germination. Total polyphenol content, flavonoid content, and antioxidant activity increased as the germination temperature and time increased.

본 연구는 고추 재배 시험을 통해서 발전소로부터 배출되는 저회 (BA, bottom ash)의 농업적 활용 가능성을 평가하고자 수행되었다. 저회의 시용수준은 5 (BA5), 10 (BA10), 15 (BA15) 및 20 (BA20) ton ha-1으로 조절하였으며, 대조구는 퇴비를 일반 기비로 사용한 관행처리 방법으로 하였다. 고추의 생육 특성은 퇴비 처리구가 저회 처리구에 비해 생육이 증가되었고, 저회 사용수준에 따른 고추의 생육은 전반적으로 BA15 ≓ BA10 > BA20 > BA5 처리구 순으로 증가되었다. 고추 재배 후 조사된 토양의 화학적 특성은 저회의 시용수준이 증가될수록 pH, EC, SOC, 그리고 CEC 함량이 증가되는 경향을 보였다. 특히, 작물의 생육과 관련이 깊은 pH, SOC 및 CEC의 지표는 저회 처리구가 대조구에 비해 각각 0.20~0.82, 1.16~8.92 g kg-1 및 0.29~0.74 cmolc kg-1 범위로 증가되어 저회가 토양 탄소 함량 증진을 포함한 토양 비옥도 개선에 효과적인 역할을 한 것으로 판단된다. 따라서 본 시험의 결과로 미루어 볼 때 저회의 시용은 관행처리에 비해 고추의 수확량은 적지만 토양환경을 개선하는데 효과적인 것으로 판단되어 토양개량제로서 저회의 농업적 활용은 가능하다고 판단된다.

백악기 중기, 세노마눔절-투로니아절에 발생한 해양 무산소 사건인 Oceanic Anoxic Event 2 (OAE2)는 다량의 유기물을 포함한 흑색셰일이 전세계적으로 퇴적된 단기간의 탄소 순환 교란 사건이다. 백악기 후기의 온실 지구의 환경 (높은 CO2 농도, 고해수면, 해양의 무산소 환경 확장)은 탄소, 황 및 여타 주요 원소의 생지화학 순환의 교란과 밀접하 게 상호 작용하였다. 1970년대 최초 명명 이후 동위원소를 포함한 화학적 지시자 연구가 활발하게 진행되었으며, 그 결 과 화산 활동과 해양 표층의 유기물 생산 증가가 무산소 환경 발달의 주된 원인으로 여겨진다. 본 논평에서는 OAE2 의 기작을 탄소 및 황, 미량 금속원소의 순환을 중심으로 살펴보고자 한다.

There is ongoing research to develop lithium ion batteries as sustainable energy sources. Because of safety problems, solid state batteries, where electrolytes are replaced with solids, are attracting attention. Sulfide electrolytes, with a high ion conductivity of 103 S/cm or more, have the highest potential performance, but the price of the main materials is high. This study investigated lithium hydride materials, which offer economic advantages and low density. To analyze the change in ion conductivity in polymer electrolyte composites, PVDF, a representative polymer substance was used at a certain mass ratio. XRD, SEM, and BET were performed for metallurgical analyses of the materials, and ion conductivity was calculated through the EIS method. In addition, thermal conductivity was measured to analyze thermal stability, which is a major parameter of lithium ion batteries. As a result, the ion conductivity of LiH was found to be 106 S/cm, and the ion conductivity further decreased as the PVDF ratio increased when the composite was formed.

Tungsten disulfide (WS2) nanosheets have attracted considerable attention because of their unique optical and electrical properties. Several methods for fabrication of WS2 nanosheets have been developed. However, methods for mass production of high-quality WS2 nanosheets remain challenging. In this study, WS2 nanosheets were fabricated using mechano-chemical ball milling based on the synergetic effects of chemical intercalation and mechanical exfoliation. The ball-milling time was set as a variable for the optimized fabricating process of WS2 nanosheets. Under the optimized conditions, the WS2 nanosheets had lateral sizes of 500–600 nm with either a monolayer or bilayer. They also exhibited high crystallinity in the 2H semiconducting phase. Thus, the proposed method can be applied to the exfoliation of other transition metal dichalcogenides using suitable chemical intercalants. It can also be used with highperformance WS2-based photodiodes and transistors used in practical semiconductor applications.

최근 전기자동차용 이차전지 등의 수요가 급증하면서 효율적인 리튬 화합물의 생산이 큰 주목을 받고 있다. 바이 폴라막 전기투석은 친환경적이며 경제성 및 효율성이 우수한 전기화학적 리튬 화합물 생산공정으로 알려져 있다. 바이폴라막 전기투석 공정의 효율은 바이폴라막의 성능에 의해 좌우되기 때문에 바이폴라막의 선택이 매우 중요하다. 본 연구에서는 세 계적으로 가장 널리 사용되고 있는 대표적인 상용 BPM인 Astom사의 BP-1E 및 Fumatech사의 FBM을 비교 분석함으로써 전기화학적 LiOH 생산을 위한 BPED 공정에 적합한 BPM의 특성을 도출하고자 하였다. 체계적인 평가를 통해 BPM의 특성 중 막의 이온전달저항 및 co-ion leakage를 줄이는 것이 가장 중요하고 이러한 관점에서 BP-1E가 FBM보다 더 우수한 성능 을 가지고 있음을 확인하였다.

The recycling of solid waste materials to fabricate carbon-based electrode materials is of great interest for low-cost green supercapacitors. In this study, porous carbon foam (PCF) was prepared from waste floral foam (WFF) as an electrode material for supercapacitors. WFF was directly carbonized at various temperatures of 600, 800, and 1,000 oC under an inert atmosphere. The WFF-derived PCF (C-WFF) was found to have a specific surface area of 458.99 m2/g with multi-modal pore structures. The supercapacitive behavior of the prepared C-WFF was evaluated using a three-electrode system in a 6 M KOH aqueous electrolyte. As a result, the prepared C-WFF as an active material showed a high specific capacitance of 206 F/g at 1 A/g, a rate capability of 36.4 % at 20 A/g, a specific power density of 2,500 W/kg at an energy density of 2.68 Wh/kg, and a cycle stability of 99.96 % at 20 A/g after 10,000 cycles. These results indicate that the C-WFF prepared from WFF could be a promising candidate as an electrode material for high-performance green supercapacitors.

Excess nitrogen (N) flowing from livestock manure to water systems poses a serious threat to the natural environment. Thus, livestock wastewater management has recently drawn attention to this related field. This study first attempted to obtain the optimal conditions for the further volatilization of NH3 gas generated from pig wastewater by adjusting the amount of injected magnesia (MgO). At 0.8 wt.% of MgO (by pig wastewater weight), the volatility rate of NH3 increased to 75.5% after a day of aeration compared to untreated samples (pig wastewater itself). This phenomenon was attributed to increases in the pH of pig wastewater as MgO dissolved in it, increasing the volatilization efficiency of NH3. The initial pH of pig wastewater was 8.4, and the pH was 9.2 when MgO was added up to 0.8 wt.%. Second, the residual ammonia nitrogen (NH4 +-N) in pig wastewater was removed by precipitation in the form of struvite (NH4MgPO4·6H2O) by adjusting the pH after adding MgO and H3PO4. Struvite produced in the pig wastewater was identified by field emission scanning electron microscopy (FE-SEM) and X-ray diffraction (XRD) analysis. White precipitates began to form at pH 6, and the higher the pH, the lower the concentration of NH4 +-N in pig wastewater. Of the total 86.1% of NH4 +-N removed, 62.4% was achieved at pH 6, which was the highest removal rate. Furthermore, how struvite changes with pH was investigated. Under conditions of pH 11 or higher, the synthesized struvite was completely decomposed. The yield of struvite in the precipitate was determined to be between 68% and 84% through a variety of analyses.