Recently 3d printer industry has two demands. first is color 3d printing. second is mass production using 3d printer that has large bed. According to previous studies, 3D printed objects have different weights depending on filament colors. 3D printed tensile specimens with filaments of various colors were checked to see they had the same weight. If so, we wanted to see it was statistically significant. As a result, we found that the weight of 3D printed objects was statistically significantly different depending on the filament color. The average weight of 3d printed objects is: Black(8.63g), Blue(8.58g), Yellow(8.53g), White(8.48g), Natural(8.46g), Green (8.45g), Red(8.42g).

Acrylonitrile–butadiene–styrene (ABS) terpolymer was compounded with short carbon fiber (CF) and carbon nanotube (CNT) using a micro-extruder followed by the injection molding process. Composite samples were fabricated with loading ratios of 20 wt.% CF and 0.1, 0.5 and 1.0 wt.% of CNT. Mechanical, electrical, thermo-mechanical, thermal, melt-flow, and structural investigations of ABS-based composites were conducted by performing tensile, impact, hardness, and wear tests, conductive atomic force microscopy (AFM), dynamic mechanical analysis (DMA), thermal gravimetric analysis (TGA), melt flow rate test (MFR), scanning electron microscopy (SEM) characterization techniques, respectively. According to mechanical test data of resultant composites including tensile and impact test findings, CNT additions led to the remarkable increase in tensile strength and impact resistance for CF reinforced ABS composites. The formation of synergy between CNT nanoparticles and CF was confirmed by electrical conduction results. The conductive path in ABS/CF composite system was achieved by the incorporation of CNT with different loading levels. SEM micrographs of composites proved that CNT nanoparticles exhibited homogeneous dispersion into ABS matrix for lower loadings.

In this experiment, the error according to the measurement method was analyzed for the length, angle, radius of curvature, and diameter of the measurement system analysis using a profile projector device used in the field. One-way analysis was performed on each data tested 30 times using a statistical technique. Through the experiment, it was found that an error occurred in each data when measuring the angle according to the measurement method, and the null hypothesis that no error occurred when measuring the length, inside dia and radius was established.

This study was conducted for the purpose of suggesting a standard that can be used under ambient temperature by improving the low mechanical and thermal properties of ABS. PC was used as a filler, and post-curing conditions of the ABS/PC blend injection material were investigated. It was found that the ABS/PC blend injection material having a PC content of 20 wt.% or more showed little change in tensile properties at a temperature of 50°C, and a decrease in tensile properties of less than 10% at 80°C.

최근 생명공학 R&D의 필수 재료인 유전자원에 대한 취득과 그 이용을 규제하는 국제 규범, 즉 나고야의정서가 등장하면서 관련 분야 연구자에게 상당한 불편과 부담이 우려되고 있다. 나고야의정서가 발효함에 따라 그 동안 인류공 동유산으로서 마치 공공재처럼 모든 국가가 자유롭게 사용해왔던 유전자원에 대하여 자원 보유국의 배타적 소유권이 인정되면서 자원의 취득과 이용에 대한 각국의 법적 규제가 도입되고 있다. 특히 유전자원의 해외의존도가 높은 우리나라는 보다 체계적인 대응을 해야 할 필요성이 있다. 본 논문은 연구자를 포함한 국내외 유전자원 이용자의 나고야의정서에 대한 인식 제고를 위하여, 먼저 의정서의 주요 핵심내용을 분석하고 해외 유전자원 이용을 위한 접근, 취득 및 이익공유의 전체적인 구조와 흐름을 제시함으로써 향후 적절한 대응에 도움이 될 수 있도록 구성ㆍ기술하였다. 나고야 의정서에 적절하게 대처하기 위해서는 연구자 본인의 노력과 국가적인 차원에서의 지원이 동시에 필요하다. 우선 연구자는 나고야의정서 체제에서의 연구활동 진행에 관한 전체적인 틀과 각 단계별 구체적인 대응에 관한 이해를 반드시 해야 한다. 이를 토대로 유전자원 접근단계부터 이로 인해 발생한 이익의 공유단계까지 제공국의 ABS 절차에 적절하게 대응해야 한다. 이렇게 볼 때 나고야의정서로 인해 과거 대비 연구활동에 일정부분 제한이 가해지고 연구 외적인 부담이 가중되었다고 할 수 있다. 하지만 전 세계적으로 유전자원에 대한 국가의 주권을 인정하는 현 상황을 일시적인 것으로 보기는 어렵다. 나고야의정서 체제를 중심으로 자국의 유전자원에 대한 주권적 권리를 지키고자 하는 자원부국의 기조가 더 강해질 것이기 때문이다. 따라서 우리나라 환경생태분야 연구자도 본 논문의 내용을 참고하여 불필요한 피해를 입지 않기 위한 대비를 확실히 해야 할 것이다.

Fused Deposition Modeling (FDM), also known as Fused Deposition Modeling (FFF), is the most widely used type of 3D printing at the consumer level. The FDM 3D printer extracts thermoplastic filaments such as ABS (Acrylonitrile Butadiene Styrene) and Polyactive Acid (PLA) through heated nozzles to dissolve the material. It works by applying layers of plastic to build platforms. Various demands for 3D printers increased, and among these demands, there was also a demand for various filament colors. ABS, one of the main filamentous materials for 3D printers, is easy to color in a variety of colors and has been studied to meet the needs of these users. Through quantitative measurements in this work, we confirm that color differences remain depending on the difference in placement on the 3D printer bad. In addition, the temperature of the specimen was measured at the start of 3D printing, during manufacturing, and at the completion of manufacturing, and the inner and central sides remained similar, but the outer sides were 5 degrees lower. These temperature differences accumulate as layers pile up, resulting in differences in weight or color, which in turn meet consumer and producer needs in the 3D printer industry.

Additive manufacturing technology, 3D printing, has been applied to various industrial fields. This production method is a production method with less material, cost and time savings, and less restrictions in shape, and is also making a leap forward in the field of eco-friendly product production. In particular, FDM (fused depositon modeling) method of extrusion lamination manufacturing is widely applied in products and medical fields. And as an alternative to mold manufacturing, it is widely used in manufacturing plastic products and parts. Therefore, this paper quantitatively and qualitatively analyzes the mechanical properties according to the processing factors of the specimen through the processing of the ABS tensile specimen printed by the FDM type 3D printer and derives the optimum value.

FDM 3D Printer is used in maker space for mass production by the maker. Makers desire to manufacture products in a variety of colors using ABS Filaments. The purpose of this study is to identify the relation between the color of resin and each position on the bed. So, when printed using the 3D Printer, we found out the difference in the colors that it appears depending on the position of the bed. To see the difference in color, basic, blue, yellow, white, and black were selected and the bed plate was divided into three sections. Specimens were measured to obtain delta E values between each sections by the chromatic differential system. Obtained delta values were analyzed by the NBS system. As a result, the delta E value of black was found to correspond to “Appreciable”. In most cases, delta E values between the middle and the outer or the inner and the outer was greater than values between the middle and the inner. Using Infrared Thermal Camera, We found that the color difference relates 3D printing positions and temperatures. As a result, the 3D printing bed positions should be considered when 3D printing mass production.

PURPOSES:The objectives of this study are to evaluate moisture sensitivity of various asphalt mixtures and to suggest an alternate method for the dynamic immersion test, which is used to determine the application of anti-stripping agent, by analyzing bond strength.METHODS:The bond strength of various asphalt mixtures such as hot mix asphalt, warm mix asphalt, and polymer-modified asphalt was evaluated by the ABS test. In order to characterize moisture sensitivity at different temperatures of the mixtures, the ABS test was conducted at -10°C, 5°C, 20°C, 40°C, and 54°C under both dry and wet conditions. The concept of the bond strength ratio was applied for objective moisture sensitivity analysis. Moreover, the bond strength characteristic was compared to the dynamic immersion test to suggest an alternate method to determine the application of anti-stripping agent.RESULTS AND CONCLUSIONS :Overall, the polymer-modified asphalt demonstrates the highest bond strength characteristic regardless of moisture condition and temperature. The bond strength characteristic displays a highly reliable linear relationship from 5°C to 40°C, and the relationship could be used to predict bond strength at any intermediate temperature. Based on the analysis of bond strength and retained asphalt ratio, the bond strength value of 1254 kPa could be applied as a criterion for anti-stripping agent.

국내 유통 중인 총 321건의 폴리아미드, 폴리우레탄, ABS, 아크릴 수지 재질 식품용 기구 중 이행우려가 있는 모노머인 4,4``-메틸렌디아닐린, 2,4-톨루엔디아민, 아닐린, 아크릴로니트릴 및 메틸메타크릴레이트에 대하여 이행량 을 조사하고 안전성 평가를 실시하였다. 83건의 폴리아미드, ABS 및 아크릴 수지 재질 식품용 기구 검체에서 현행 식품용 기구 및 용기·포장 공전상의 용출규격 이하인 4,4``-메틸렌디아닐린, 2,4-톨루엔디아민, 아크릴로니트릴 및 메틸메타크릴레이트가 이행되었다. 이행량 결과를 토대로 안전성 평가 시나리오에 적용하여 4,4``-메틸렌디아닐린, 2,4-톨루엔디아민, 아크릴로니트릴 및 메틸메타크릴레이트의 EDI를 산출한 후 TDI와 비교하여 위해도를 평가하였다. EDI는 폴리아미드 재질 기구의 4,4``-메틸렌디아닐린과 2,4-톨루엔디아민의 경우 각각 2.39 × 10-9, 및 1.20 × 10-9mg/kg bw/day, ABS 재질 기구의 아크 릴로니트릴의 경우 4.32 × 10-9mg/kg bw/day, 아크릴 수지 재질 기구 메틸메타크릴레이트의 경우 2.27 × 10-7mg/kg bw/day이었다. ABS 재질 기구 이행 아크릴로니트릴의 위해도는 RfD 대비 4.32 × 10-4% 수준이었고, 아크릴 수지 재질 기구 이행 메틸메타크릴레이트의 위해도는 TDI 대비 1.89 × 10-5% 수준이었다. 결론적으로 검토된 평가 항목들의 위해도는 TDI 대비 4.32 × 10-4%와 1.89 × 10-5%에 불과한 것으로 조사되어 안전한 수준인 것으로 사료되었다. 이러한 결과들은 앞으로 기구 및 용기·포장의 안전 관리를 위한 과학적인 근거자료로 이용될 수 있을 것으로 판단된다.

식물유전자원에 대한 접근과 이익공유(Access to genetic resources and Benefit Sharing : ABS)에 대한 국제규범은 식량농업식물유전자원국제조약(International Treaty on Plant Genetic Resources for Food and Agriculture : ITPGRFA)과 생물다양성협약(Convention on Biological Diversity : CBD) ABS 의정서(일명 ‘나고야의정서’)가 있는데, 그 목적에 따라 다른체제를 가지고 있다. ITPGRFA는 지속적 농업발전과 식량안보에 기여하는 식량 및 사료작물 64작물에 대해 다자체제를적용한다. 유전자원에 대한 접근과 유전자원을 이용한 후 발생하는 이익에 대해서는 유전자원 제공자와 수령자 사이에 표준물질이전협정(Standard Material Transfer Agreement :SMTA) 체결에 의해 이루어질 수 있다. 상업적 이익이 발생하였을 때는체결한 표준물질이전협정에 따라 수익의 일정 부분을 식량농업식물유전자원국제조약 재정기구에 납부해야한다. 그렇게 지불된 자금은 개발도상국과 경제체제전환국의 농부들에게 직·간접적으로 지원하는데 사용된다. CBD ABS의정서는 ITPGRFA의다자체제와는 다른 자원제공자(혹은 제공국)와 이용자(혹은 이용국)간의 양자체결에 의해서 이루어진다. 생물유전자원 뿐만 아니라 이와 관련된 전통지식을 포함하여 이용을 위해 접근 할경우 사전에 자원제공국이나 제공자에게 허가를 받아야 하며(사전통보승인, Prior Informed Consent, PIC), 유전자원의 이용에서 발생하는 이익을 자원제공자와 이용자간 상호합의조건 (Mutually Agreed Terms, MAT)에 따라 공유하도록 규정한다. 이러한 절차나 내용은 각국의 법으로 규정하도록 되어 있다. 또한 ABS의정서는 PIC나 MAT와 같은 절차의 이행여부를 모니터링 하고, 그와 관련된 내용을 ABS 정보공유소(ABS Clearing House)에 등록하도록 되어있다. 이러한 ABS 국제규범으로 인하여 유전자원에 대한 국가의 주권의식이 높아지고자국의 유전자원의 보호와 관리가 강화됨에 따라 국내 유전자원의 다양성 확보와 보존 및 활용을 위해 국제동향에 맞추어능동적으로 준비하는 것이 필요하다.

Safety is one of the primary concern for passengers riding a vehicle. Since introduction in the 1980's, the ABS(Anti-lock Brake System) has become so popular that now it almost became a necessity in passenger vehicle. ABS system is detects the wheel speed by controlling the amount of hydraulic when the wheel is locked or slipped. In addition, it consists of device with a complex simulation algorithm and the vehicle's hydraulic braking device And it can determine the status of the hydraulic control by detected signals working status of each solenoid.

본 연구에서는 poly(acrylonitrile-butadiene-styrene) (ABS)에 carbon graphite와 zeolite 4A를 첨가하여 복합 필름을 제조하고 공기와 수증기 투과 특성을 살펴보았다. 복합 필름의 경우 모든 경우에서 순수한 ABS에 비해서 산소와 질소의 투과도가 감소하였으며, 산소의 투과도 감소가 질소의 투과도 감소보다 약간 큰 관계로 산소/질소 선택도도 조금 감소하였다. 또한, 수증기 투과도도 순수한 ABS에 비해서 약 1/2로 감소하였다. 이러한 투과도의 감소는 ABS에 filler를 첨가함으로 인하여 물질 확산 경로의 tortuosity가 증가했기 때문인 것으로 생각된다.

In this thesis, using the 400 series ferrite stainless steel such as 434LD2 which are furter excellent then the existing ferric products in mechanical characteristics, and experiment has been conducted on corrosion resistance of sensor ring. The results are following. 1. The products before sintering are much more corrodible in the condition of spray test of salt water and ammonia than humidity and nitrogen condition. 2. 434LD2 ferrite stainless steel has shown a good corrosion resistance without an addition surface treatment. thus the decreasing production process has been obtained. 3. As hardness value of HRB 80 and tensile test, 434LD2 ferrite stainless steel with show a good endurance when it is combined to constant velocity joint (c/v joint), and has a good hardness properties endurable to sand and pebble impact.

The surface treatment of C-type isotropic pitch-based carbon fiber was carried out by anodic oxidation in 5 wt% NH4NO3 electrolyte. The changes of fiber surface and carbon fiber/ABS resin composites were characterized by SEM, XPS and mechanical properties test. The oxygen functional groups on the surface, such as hydroxyl (-C-OH), carboxyl (-COOH) groups etc., increased after oxidation. Tensile strength, flexural strength and modulus of carbon fiber/ABS composites were also enhanced. However, the impact strength decreased with the improvement of the surface adhesion between CF and matrix.