Adsorption experiment of carbon dioxide was performed on MCM41 silica with a 30 wt .% EDA(ethylenediamine) loading at different CO2 inlet concentration and various adsorption temperature. The surface characteristics of CO2 capturing agent were carried out using BET analysis, X-ray diffraction and FT-IR. The results of BET showed 781 m2/g for MCM41 and 464 m2/g for EDA/MCM41. X-ray diffraction results reveled typical hexagonal pore system. The higher sorption capacity of EDA/MCM41 was about 80 mgco2/gsorbent with 50% CO2 inlet concentration and 303 K adsorption temperature. The isosteric heat of adsorption in 303-353 K ranged from -25.47 to -28.24 KJ/mole for EDA/MCM41, which indicates CO2-EDA/MCM41 interaction with exothermic adsorption process. Finally, the performance of EDA/MCM41 in 10 consecutive sorption-desorption runs was a stable with only a minor drop in its sorption capacity.

This work is to study the variations of adsorption characteristics of binary vapor according to packing system of double-layer bed by fixed bed experiment. Breakthrough curves of single and binary vapor composed of acetone and benzene on single-layer and double-layer adsorption bed composed of activated carbon (AC) and silica-aluminar (SA) were compared. Adsorptions of binary vapor on double-layer bed were influenced by the differences of surface area between adsorbents as well as the polarity difference between adsorbent and adsorbate. The roll-up phenomenon of acetone vapor was happened by replacement with competing adsorption between acetone vapor and benzene vapor on AC bed, but it was not happened on SA bed because acetone vapor and benzene vapor had less difference in affinity with SA bed. The breakthrough times of acetone vapor and benzene vapor on AC/SA double-layer bed were three times and 1.4 times larger respectively than on SA/AC double-layer bed, the differences of breakthrough times were relatively larger than the equilibrium adsorption capacities according to packing system of double-layer bed.

This work is to compare the experiment results by a continuous fixed-bed adsorption of water vapor, acetone vapor, and toluene vapor on zeolite 13X (SAU) and silica-alumina (SAK). SAU and SAK have very different pore structure but similar composition as inorganic adsorbent. The relationship between the equilibrium adsorption capacity and specific pore size range were studied. Adsorption of water vapor was more suitable on SAU than SAK because SAU has relatively more developed pores around 5 Å than SAK in the pore range of 10 ~ 100 Å. Adsorption of acetone vapor was more suitable on SAK than SAU because SAK has relatively more developed pores around 5~10 Å than SAK in the pore range of less than 10 Å. Adsorption of toluene vapor was more suitable on SAK than SAU because SAK has relatively more developed pores in the pore range of 10~100 Å than SAK. Adsorption capacity of the adsorbent was closely related to the surface area generated in the specific pore size region. But it was difficult to distinguish the relationships between adsorption capacity and micro area, and the external surface area of adsorbent.

The purpose of this work is to present the experiment results by a dynamic adsorption of water vapor on pelletized zeolites (ADZ300, ADZ400, and ADZ500) in fixed bed. The breakthrough curves of water vapor with several different concentrations and temperature in the range of 25～45 ℃ on zeolite bed were investigated. In the same conditions, the breakthrough time on ADZ400 and ADZ500 were little longer than ADZ300, and the equilibrium adsorption capacity on ADZ500 was highest. The higher the concentration of water vapor was, the faster the breakthrough time was, and the slope of breakthrough curves showed a tendency to increase. The faster the flow rate of water vapor was, the faster the breakthrough time was relatively, but variations between flow rate and breakthrough time did not have a proportional relationship. The breakthrough curve maintained constant gradient in spite of variation of flow rate in the same concentration. The temperature rise in zeolite bed by adsorption heat was occurred in the early stage of adsorption. After water molecule layers were formed on the surface of zeolite, the temperature was slowly cooled by water vapors continuously flowed in as constant temperature. The greater the concentration of water vapor and adsorption temperature were, the temperature difference in zeolite bed was increased.

In this research, equilibrium of adsorption and kinetics of As(V) removal were investigated. The coal mine drainage sludge(CMDS) was used as adsorbent. To find out the physical and chemical properties of CMDS, XRD (X-ray diffraction), XRF (X-ray fluorescence spectrometer) analysis were carried out. The CMDS was consist of 70% of goethite and 30% of calcite. From the results, an adsorption mechanism of As(V) with CMDS was dominated by iron oxides. Langmuir adsorption isotherm model was fitted well more than Freundlich isotherm adsorption model. Adsorption capacities of CMDS 1 was not different with CMDS 2 on aspect of amounts of arsenic adsorbed. The maximum adsorption amount of two CMDS were respectively 40.816, 39.682 mg/g. However, the kinetic of two CMDS was different. The kinetic was followed pseudo second order model than pseudo first order model. Concentrations of arsenic in all segments of the polymer in CMDS 2 does not have a constant value, but the rate was greater than the value of CMDS 1. Therefore, CMDS 2, which is containing polymer, is more effective for adsorbent to remove As(V).

The adsorption behavior of nitrate nitrogen was investigated from aqueous solution using char prepared from oak chip. The removal rate of nitrate nitrogen was found to be dependent on temperature and it is increased as the temperature increase. Adsorption equilibrium data of nitrate nitrogen on oak char. reasonably fitted Langmuir and Freundlich isotherm models. The adsorption energy obtained from D-R model was 12.5 kJ/mole at 20℃ indicating an ion exchange process as primary adsorption mechanism. Thermodynamic parameters such as △Go,, △Ho, and △So were -23.76 kJ/mole, 26.1 kJ/mole and 89.7 J/K·mole at 20℃, respectively, indicated that the nature of nitrate nitrogen adsorption is spontaneous and endothermic.

The adsorption characteristics of CO2 gas on impregnated activated carbons with MEA (Mono-ethanolamine) and AMP (2-Amino 2-methyl 1-propanol) were studied to improve the adsorption ability of CO2 gas on activated carbon. The equilibrium adsorption capacity of CO2 gas was increased by increment of impregnation concentration up to 40 %, but decreased above 50 %. The adsorption capacity of activated carbon impregnated with AMP was higher than activated carbon impregnated with MEA. The breakthrough was fast according to increment of inlet concentration of CO2 gas.

토양과 지하수의 비소 오염은 최근 심각한 환경문제들 중 하나로 대두되고 있으며, 이러한 비소 오염은 다양한 자연적 또는 인위적 원인들로 인하여 발생할 수 있다. 지중에서 비소의 거동은 철, 망간, 알루미늄 등과 같은 여러 종류의 산화물 또는 수산화물들과 점토광물에 의하여 영향을 받고, 특히 이중에서 철 (산)수산화물이 가장 효과적으로 비소를 제어하는 것으로 알려져 있다. 이에 본 연구에서는 철 산화물의 일종인 자철석의 비소 흡착 특성을 연구하였다. 자철석이 비소의 화학종(5가와 3가 비소)에 따라서 어떠한 흡착 특성을 나타내는가 알아보기 위하여 비소 흡착에 주요하게 영향을 줄 수 있는 자철석의 물리화학적 특성들을 측정하고, 평형론적 실험과 반응속도론적 실험을 병행하여 수행하였다. 비소 흡착제로 사용하기 위하여 실험실에서 합성한 자철석의 영전하점(point of zero charge, PZC)과 비표면적은 각각 6.56과 16.6 g/m2로 다른 철 (산)수산화물들에 비해 상대적으로 낮은 간들을 나타냈다. 두 비소 화학종과 자철석의 평형실험 결과, 3가 비소가 5가 비소보다 더 많이 흡착되는 것으로 조사되어, 3가 비소가 흡착제로 사용된 자철석과 더 높은 친화력을 가지는 것으로 나타났다. 3가 비소는 pH 7에서, 5가 비소는 pH 2에서 흡착량이 가장 높았으며, 5가 비소의 경우 pH가 증가함에 따라 자철석의 표면과 전기적 반발력으로 인해 그 흡착량이 감소하는 것으로 나타났다. 이는 pH에 따른 자철석의 표면전하의 변화와 비소의 화학적 형태 등이 비소를 제어하는데 있어서 중요한 인자로 고려되어야 한다는 것을 지시한다. 시간에 따른 흡착 반응연구에서는 5가 비소가 3가 비소보다 더 빠르게 흡착됨을 알 수 있었으나, 비소의 화학적 존재형태에 관계없이 모두 4시간 이내에 평형 흡착에 도달하였다. 또한, 반응속도 실험결과를 지금까지 제안된 다양한 반응속도 모델들과 비교하였을 때, power function과 elovich 모델이 본 연구에서 사용된 자철석과 비소의 흡착을 가장 잘 모사하는 것으로 나타났다.

The surface properties and adsorption rates of activated carbon modified with acid and base were compared. The distribution ratio of C and C-H on the surface of activated carbon were decreased by modification with acid and base, but the distribution ratio of C-O, C=O, and O=C-O were increased. Base modification damaged the surface of activated carbon more than acid modification, it caused the effect of 6 percent increments of surface area. Adsorption rate model was more suitable to second order equation than first order equation. Adsorption rate was controlled by adsorption in pore better than in surface.

Quality test for activated carbon(AC) filter used for drinking water purifier is now an obligatory test and the standard material for valid purifying amount in water purifier performance test has been changed from residual chlorine to chloroform according to the notice of Ministry of Environment in 2006. Therefore, this study aimed to compare the ingredients of AC filters by confirming chloroform removal rate of AC filter and conducting 4 adsorption tests (Iodine, methylene blue decolorization, phenol value, ABS value) for AC filters provided by manufacturers. With water pressure of 1 kgf/cm2, 1,500 liters of prepared inflow went through to check chloroform removal rate. As a result, product with removal rate of below 60% from all products. On the other hand, 4 adsorption tests were conducted for filters in the market and filters from manufacturers. None of the products satisfied all 4 tests. In particular, they showed great shortage to the standard in phenol value and ABS value test. However, manufacturers' filter showed much better performance than filters in the market. Also, the result of valid purifying amount test for each of five products of appropriate product and inappropriate product based on filter quality test showed average 4,440 liters for appropriate product and average 2,620 liters for inappropriate product. According to the result, it is shown that the filter with good adsorption also had good chloroform removal efficiency and adsorption efficiency. Therefore, it is expected that customers can screen good quality product through obligatory conduct of filter quality test. However, it is considered that complementation in system is required for future inspection.

The surface properties of activated carbon modified by acids and base were studied. The influence of the surface chemistry on the adsorption of benzene and acetone vapor on modified activated carbons has been investigated The modified activated carbons were obtained by treatment with acetic acid (CH3COOH), nitric acid (HNO3) and sodium hydroxide (NaOH). The modified activated carbons had similar porosity but different surface chemistry and adsorption characteristics. The total surface acidity (sum of functional groups) of activated carbon (AC-AN) treated by nitric acid was 2.6 times larger than that of activated carbon (AC) before the acid treatment. Especially, carboxyl group was much developed by nitric acid treatment. The benzene equilibrium adsorption capacity of AC-AN decreased 20% more than that of AC. However, the acetone equilibrium adsorption capacity of AC-AN increased 20% more than that of AC because of the large increase of carboxyl group and acidity.

This paper describes the adsorption/desorpton efficiency of a modified activated carbon by irradiated microwave to treat toluene. By employing microwave energy, the regeneration time was considerably shortened compared with conventional thermal heating regeneration. New adsorbent called ACB(Activated Carbon-Bentonite) was prepared from powder activated carbon with mixing bentonite as a binder. Specific surface area, average pore size and total pore volume of ACB were calculated from the nitrogen adsorption/desorption isotherm. The surface of ACB was characterized with scanning electron microscope(SEM). The results showed that the specific surface area, total pore volume, average pore size of ABC was not influenced by regenerating cycle with microwave irradiation. Toluene was adsorbed onto ACB which desorbed by MW irradiation. Absorption capacity of ACB was 0.117 gtoluene/ gACB. Desorption efficiency of toluene increased as higher microwave output was applied.

The activated carbon was prepared from waste citrus peels using NaOH. With the increase of NaOH ratio, iodine adsorptivity and specific surface area of the activated carbon prepared were increased, but activation yield was decreased. The optimal condition of activation was at 300% NaOH and 700℃ for 1.5 hr. For the activated carbon produced under optimal condition, iodine adsorptivity was 1,006 mg/g, specific surface area was 1,356 m2/g, and average pore diameter was 20～25Å. From the adsorption experiment for benzene vapor in fixed bed reactor, it was found that the adsorption capacity of activated carbon prepared from waste citrus peel was higher than that of activated carbon purchased from Calgon company. This result implied that the activated carbon prepared from waste citrus peel could be used for gas phase adsorption.

This study was performed to investigate the possible uses of waste sludge for the removal of heavy metal ions. The adsorption experiments were conducted with wastes such as sewage treatment sludge, water treatment sludge and oyster shell to evaluate their sorption characteristics. Heavy metals selected were cadmium, copper and lead. In the sorption experiments on the sewage treatment sludge, water treatment sludge, oyster shell and soil, sorption occurred in the beginning and it reached equilibrium after 40 minutes on the oyster shell and 4 hour on the sewage treatment sludge and water treatment sludge. Results of Freundlich isotherms indicated that sewage treatment sludge could be properly used as an adsorbent for heavy metals and sorption strength of heavy metals was in the order of Pb > Cu > Cd. In the influence of pH on the adsorbents, sorption rate was more than 80% in pH 4 and most of heavy metals were adsorbed in pH 9. Adsorption rate of Cd decreased with decreasing pH and then adsorption rate of Cu was lower in soil.

This study is to investigate the relationship between pore structures of activated carbons and adsorption characteristics of toluene vapor using dynamic adsorption method. The surface areas of below 10Å in the pore diameter of activated carbons used in this experiment were in the range of 72～93％ of total cumulative surface area and the toluene vapor equilibrium adsorption capacities were in the range of 350～390mg/g. Activated carbons having larger toluene adsorption capacity than the compared activated carbons had relatively pores in the pore diameter range of 7～10Å. Linear relationship between equilibrium adsorption capacity and cumulative surface area was in the diameter range of over 7Å. It was thought that toluene vapor was relatively well adsorbed on surfaces of pores of over 7Å.

The purposes of this paper were to monitor the temperature rising courses and spark discharge of the modified granular activated carbon (GAC) by microwave (MW) irradiation and to evaluate absorption of benzene. The GAC coated on SiO2, boron, talc, ferrite was named as the modified GAC. Thermal and spark discharge measurement of virgin GAC and modifed GAC has been carried out using a MW device operating at 2450 MHz under various energy conditions. The results of this paper as follows. First, the modified GAC is more efficient than the virgin GAC in temperature control. Temperature gradient of the modified GAC is more lower than that of virgin GAC. The temperature gradient of GAC was observed in the following order : virgin GAC, Mn-Zn ferrite/GAC, Ni-Zn ferrite,/GAC, SiO2/GAC, Boron/GAC, Talc/GAC. Second, the spark discharge of the modified GAC was diminished, compared with that of virgin GAC. Because of its excellent electrical insulating properties, the coating material prevents the spark discharge. Finally, the benzene adsorption capacity of the modified GAC decreased due to diminishing of adsorption site by the coating material. Considering the temperature gradient and spark discharge of GAC, the GAC coated SiO2 would be appropriate absorbent under irradiation of MW.

Adsorption characteristics of toluene vapor, which is one of important source of volatile organic compounds (VOCs), by activated carbon were investigated using a fixed bed adsorption column. The operating parameters such as breakthrough curve, adsorption capacity, mass transfer zone (MTZ), and length of unused bed (LUB) were studied. The experimental results showed that the breakthrough time decreased with increasing inlet toluene concentration and gas flow rate. MTZ and LUB increased with the increase of inlet concentration, gas flow rate, and particle size of activated carbon. The adsorption capacity increased with the increase of inlet toluene concentration, while it decreased with increasing particle size. However, it was kept at constant value regardless of the increase of gas flow rate. Adsorption isotherm of toluene vapor could be represented by the Freundlich adsorption equation fairly well. From the adsorption experiments using some VOC gases such as toluene, xylene, butyl acetate. butanol and acetone, it was also found that the adsorption capacity was higher in the case of gas with higher boiling point and lower vapor pressure.

Adsorption on goethite of individual component from a solution containing phosphate, sulfate, or copper ion was investigated. Competitive adsorption in the binary and ternary solution systems composed of phosphate, sulfate, and copper ions was also investigated. In competitive adsorption systems with phosphate and sulfate ions, the presence of phosphate ion reduced the adsorption of sulfate ion largely. On the other hand, the presence of sulfate ion caused only a small decrease in phosphate adsorption. This result suggests that phosphate ion is a stronger competitor for adsorption on goethite than sulfate ion, which is consistent with the higher affinity of phosphate for the surface compared to sulfate ion. Compared to the results from single-sorbate systems, adsorption of copper ion in the binary system of sulfate ion and copper ion was found to be enhanced in the presence of sulfate ion. Addition of sulfate ion to the binary system of copper ion and phosphate ion resulted in a small enhancement in copper sorption. This result implies that the presence of sulfate ion promotes adsorption of the ternary complex FeOHCuSO4. The adsorption isotherms could be well described by the Langmuir adsorption equation.

Adsorption of phosphate, sulfate, and copper ion to goethite was investigated. Goethite was prepared in the alkaline solution. In the single adsorbate systems, the final equilibrium plateau reached within 20 min. The adsorption isotherms of the individual ions could be well described by the Langmuir equation. The maximum adsorption capacities (qmax) were calculated as 0.483 mmol/g and 0.239 mmol/g at pH 3 for phosphate and sulfate ion, and 0.117 mmol/g at pH 6 for copper ion, respectively. In competitive adsorption system with phosphate and sulfate, phosphate ion was a stronger competitor for adsorption on goethite than sulfate ion, which was consistent with higher affinity of phosphate ion for the surface compared to sulfate ion. The existence of sulfate ion enhanced the adsorption of copper ion but the adsorption of sulfate was inhibited when copper ion was present.