검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 55

        5.
        2020.05 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        As a case study on aspect ratio behavior, Kaolin, zeolite, TiO2, pozzolan and diatomaceous earth minerals are investigated using wet milling with 0.3 mm media. The grinding process using small media of 0.3 pai is suitable for current work processing applications. Primary particles with average particle size distribution D50, ~6 μm are shifted to submicron size, D50 ~0.6 μm after grinding. Grinding of particles is characterized by various size parameters such as sphericity as geometric shape, equivalent diameter, and average particle size distribution. Herein, we systematically provide an overview of factors affecting the primary particle size reduction. Energy consumption for grinding is determined using classical grinding laws, including Rittinger's and Kick's laws. Submicron size is obtained at maximum frictional shear stress. Alterations in properties of wettability, heat resistance, thermal conductivity, and adhesion increase with increasing particle surface area. In the comparison of the aspect ratio of the submicron powder, the air heat conductivity and the total heat release amount increase 68 % and 2 times, respectively.
        4,000원
        7.
        2018.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The main purpose of this study is suggest of field bond strength evaluation method for more objective evaluation method through Evaluation of Bond Strength Properties with changing aspect ratio and temperature. METHODS : The evaluation is laboratory bond strength test. Using the core machine, the pull-off test method ; the bond strength test of interface layer the universal testing machine. RESULTS: As a result of the laboratory bond strength evaluation, it was verified that the bond strength by aspect ratio decreases linearly with increasing aspect ratio and the bond strength properties by temperature change existed at high and low temperature condition relative to odinary temperature condition. CONCLUSIONS: According to the results of laboratory bond strength evaluation, the field bond strength evaluation results suggest applying the proposed correction factor (0.8, 1.0, 1.4, 1.9) according to aspect ratio(0.5, 0.1, 1.5, 2.0), For more objective evaluation of the bond strength, it is analyzed that the evaluation value is within 6 ~ 32℃ and the result can be obtained within 5% of the coefficient of variation.
        4,000원
        8.
        2018.04 구독 인증기관 무료, 개인회원 유료
        The contemporary high-tech structures have become enlarged and their functions more diversified. Steel concrete structure and composite material structures are not exceptions. Therefore, there have been on-going studies on fiber reinforcement materials to improve the characteristics of brittleness, bending and tension stress and others, the short-comings of existing concrete. In this study, the purpose is to develop the estimated model with dynamic characteristics following the steel fiber mixture rate and formation ration by using the nerve network in mixed steel fiber reinforced concrete (SFRC). This study took a look at the tendency of studies by collecting and analyzing the data of the advanced studies on SFRC, and facilitated it on the learning data required in the model development. In addition, by applying the diverse nerve network model and various algorithms to develop the optimal nerve network model appropriate to the dynamic characteristics. The accuracy of the developed nerve network model was compared with the experiment data value of other researchers not utilized as the learning data, the experiment data value undertaken in this study, and comparison made with the formulas proposed by the researchers. And, by analyzing the influence of learning data of nerve network model on the estimation result, the sensitivity of the forecasting system on the learning data of the nerve network is analyzed.
        3,000원
        9.
        2017.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, we analyzed the radiant heat performance of ballast fin when the aspect ratio of the fin of ballast was changed. The minimum size of the mesh was 0.02 mm, and the grid number was about more than 11 thousand. In order to analyze the radiant heat performance of ballast fin, the aspect ratio of fin was 1.00(2 mm:2 mm), 1.80(1.5 mm:2.7 mm), and 0.56(2.7 mm:1.5 mm) respectively; that the heat transfer area was constantly 0.4 mm 2 . The numerical condition was that heat flux was constantly 1×10 5 W/m 2 , and measuring times were 0.1 second, 0.2 second, 0.5 second, 2 seconds, 5 seconds and 10 seconds respectively. The temperature values of fin at the 1.00 and 1.80 of aspect ratios were extremely large when heat flux time was 10 seconds. As a result, the maximum value of radiant heat performance of ballast fin appeared to the aspect ratio of 1.80.
        4,000원
        10.
        2016.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 풍력 블레이드와 같이 세장비가 크고 초기 비틀림이 존재하는 복합재료로 구성된 블레이드에 대한 이차원 단면의 차원축소와 복원관계를 이론적으로 기술하였다. 그리고 VABS 이용한 보의 차원축소모델에 대한 유효성을 검증하기 위해 선행연구 모델을 활용하여 기존 연구결과를 수치적으로 비교하였다. 실물과 가장 가까운 날개 구조물 2차원 형상에 단 면해석을 적용하여 정밀한 단면의 이산화를 수행하고 VABS를 이용하여 블레이드의 특성(질량행렬, 강성행렬)을 포함한 1 차원 보 모델링을 수행하였다. 1차원 보 모델을 통해 세장비가 큰 날개 구조물의 거동을 확인하고 내부하중을 계산하여 단 면위치에서 변형률 복원을 수치적으로 계산하고 이산화된 단면에 수치적으로 매핑하여 시각적으로 확인하고 여유마진을 계 산하였다.
        4,000원
        11.
        2016.09 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Tungsten (W) thin film was deposited at 400 oC using pulsed chemical vapor deposition (pulsed CVD); film was then evaluated as a nucleation layer for W-plug deposition at the contact, with an ultrahigh aspect ratio of about 14~15 (top opening diameter: 240~250 nm, bottom diameter: 98~100 nm) for dynamic random access memory. The deposition stage of pulsed CVD has four steps resulting in one deposition cycle: (1) Reaction of WF6 with SiH4. (2) Inert gas purge. (3) SiH4 exposure without WF6 supply. (4) Inert gas purge while conventional CVD consists of the continuous reaction of WF6 and SiH4. The pulsed CVD-W film showed better conformality at contacts compared to that of conventional CVD-W nucleation layer. It was found that resistivities of films deposited by pulsed CVD were closely related with the phases formed and with the microstructure, as characterized by the grain size. A lower contact resistance was obtained by using pulsed CVD-W film as a nucleation layer compared to that of the conventional CVD-W nucleation layer, even though the former has a higher resistivity (~100 μΩ-cm) than that of the latter (~25 μΩ-cm). The plan-view scanning electron microscopy images after focused ion beam milling showed that the lower contact resistance of the pulsed CVD-W based W-plug fill scheme was mainly due to its better plug filling capability.
        4,000원
        12.
        2015.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        항공기는 목적에 따라서 민간 항공기, 무인항공기, 전투기, 헬리콥터 등 다양한 항공기가 존재한다. 이 각각의 항공기는 특정한 목적에 맞게 형상 및 설계가 된다. 특히 항공기 개발과정에서 중요한 해석과정 중 하나가 구조해석이다. 하지만 항공기 구조가 복잡해지고 3차원 모델로 구조해석을 하게 되면 시간과 비용이 크게 증가하게 된다. 따라서 해석 효율성을 위해서 1차원 등가 보나 2차원 평면 응력 조건을 이용하여 실제 구조를 보다 간단하게 모델링한다. 하지만 이런 모델링은 실제 구조와 차이가 있으므로 실제 구조를 잘 반영할 수 있는 적절한 모델링이 필요하다. 따라서 구조형태에 따라서 1차원 등가 보와 2차원 평면응력 조건을 적절하게 선택하여야 한다. 본 논문에서는 EDISON에 업로드 된 구조해석 프로그램을 이용하여 1차원 구조해석과 2차원 구조해석을 검증하고 구조형태에 따라서 1차원 해석과 2차원 해석을 각각 3차원 MSC NASTRAN 구조해석과 비교하여 적절한 해석방법을 찾고자 한다. 비교결과 길이 대 높이 비가 증가할수록 1차원 해석과 3차원 해석의 오차가 급격히 줄어들었으며 이 비율이 18보다 증가하였을 때는 1차원 해석이 2차원 해석보다 3차원 해석의 결과와 일치하였다.
        4,000원
        13.
        2015.09 구독 인증기관 무료, 개인회원 유료
        Micro-electromechanical systems (MEMS) 구조물용 고 종횡비의 외팔보 제작을 목적으로 초임계 이산화탄 소를 사용한 건식 식각 실험을 진행하였다. 건식 식각 실험은 초임계 이산화탄소에 50% 불산 (HF) 원액과 공용매 (물, 메탄올, 에탄올, 이소프로필 알콜)를 사용하여 진행되었다. 희생 실리카 층을 식각하여 드러난 MEMS 외팔보 빔 은 주사전자현미경을 이용하여 관찰하였다. HF원액을 사용한 건식 식각 실험은 종횡비 1 : 150의 외팔보 빔까지 기 판과 접착없이 단독으로 서 있는 형태로 제작되었다. 공용매로 메탄올과 에탄올을 사용한 건식 식각의 결과에서는 종 횡비 1 : 75 까지 접착없이 제작할 수 있었고, 이소프로필 알콜을 공용매로 첨가한 실험 결과에서는 종횡비 1 : 37.5 까지 접착없이 제작할 수 있었다. 본 연구의 결과 건식 식각과정에서 알콜계 공용매의 첨가는 대체로 식각 성능을 저 하시킴을 알 수 있었다.
        4,000원
        14.
        2014.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this paper. the effects of the aspect ratio on the natural frequency of the advanced composite road structures is studied. The advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. Some laminate orientations have decreasing values of  ,  ,  and  stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. Most of the road structures have large aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms.
        4,000원
        17.
        2013.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: Current theories for composite structures are too difficult for design engineers for construction. The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. METHODS: Some laminate orientations have decreasing values of D16, B16, D26 and B26 stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. In order to study the effect of Mx on the equilibrium equations, two cases are considered. Mx term is considered or neglected. RESULTS: Most of the road structures have high aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms. CONCLUSIONS: Most of the road structures have plate aspect ratios higher than 2. It is concluded that, for all boundary conditions, neglecting the longitudinal moment(Mx) terms is acceptable if the aspect ratio (a/b) is equal to or higher than 2. This conclusion gives good guide line for design of the road structures.
        4,000원
        18.
        2012.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        공간구조물은 높이-경간비 또는 개각과 같은 아치의 형상비에 따라 상이한 동적거동특성을 나타내며, 이러한 공간구조물은 지진의 영향을 직접적으로 받는 하부구조의 강성 및 그 접합부에 따라 상이한 지진응답특성을 나타낸다. 따라서 본 연구에서는 수직진동모드와 수평진동모드의 영향이 다른 단층아치구조에 하부기둥의 강성과 접합부에 따른 지진응답특성을 분석하고자 한다. 하부기둥의 영향으로 단층아치구조는 수직방향 응답이 더 많은 영향을 받으며, 기둥의 접합부 회전강성에 있어서는 활절을 제외하고는 큰 영향이 없는 것으로 나타난다.
        4,000원
        20.
        2011.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Flow control of flow field is essential to design efficient elements relating to fluid machineries. In this study, flow characteristics of rectangular prism with center gap through-flow at different aspect ratio was investigated to flow control. It was used a FLUENT 6.3 version to study flow field. It was found that the through-flow disturbs the development of vertical velocity component and decreased the vortex size and critical value of a rapid change in pressure coefficient distribution.
        4,000원
        1 2 3