검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 7

        1.
        2023.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 어선의 운동성능을 향상하기 위해 부착되는 부가물의 조합과 파라미터 변경에 따른 어선의 자유 횡 동요 감쇠 와 저항 성능을 평가하였다. 성능 평가를 위해 전산유체역학(Computational Fluid Dynamics)을 이용한 수치해석을 수행하였으며, 주요 부가 물인 빌지킬과 선저킬의 조합과 치수 변경에 따른 횡 동요 주기와 감쇠 계수의 변화를 확인하였다. 선저킬의 경우 길이가 변화함에 따른 횡 동요 감쇠 계수의 변화가 상대적으로 크지 않음을 확인하였다. 반면 빌지킬의 경우 길이와 각도의 증가에 따라서 횡 동요 감쇠 계수가 증가함을 확인하였다. 4가지 부가물 조합 조건과 나선의 저항 성능을 비교하였으며, 부가물에 의한 어선의 자세와 압력분포의 변화로 인 해 저항이 증가함을 확인하였다. 본 연구 결과를 통해 부가물 크기와 배치가 어선의 운동 및 저항 성능에 미치는 영향을 확인할 수 있었 으며, 어선 적용 시에 도움이 될 수 있을 것으로 기대한다.
        4,000원
        2.
        2018.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 촉매이용열처리 활엽수의 심·변재 구분에 따른 내후성 효과를 평가하기 위하여 실시하였다. 졸참나무, 구실잣밤나무, 백합나무를 심재와 변재로 구분한 시험편을 7.5%의 촉매제에 10분간 침지하여 열처리 장치에서 130℃에 90분간 열처리 후 백색 부후균(Trametes versicolor)을 사용하여 활엽수 심재와 변재의 내후성을 조사하였다. 촉매이용열처리 후 모든 조건에서 목재의 중량과 밀도가 약간 감소하는 경향을 나타내었다. 부후처리 후 무처리와 비교하여 촉매이용열처리에서 낮은 중량감소율이 나타났으며, 수종별 비교에서는 졸참나무의 촉매이용열처리 변재에서 가장 낮은 중량감소가 나타났다. 촉매제를 이용한 열처리법은 부후균에 의한 목재의 부후저항을 효과적으로 증가시켰다.
        4,000원
        3.
        2017.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 목초액 침지처리 활엽수의 심·변재 구분에 따른 내후성 효과를 평가하기 위하여 실시하였 다. 졸참나무, 구실잣밤나무, 백합나무를 심재와 변재로 구분한 시험편을 목초액에 96시간 동안 침지시 킨 후 백색 부후균을 사용하여 활엽수 심재와 변재의 내후성을 조사하였다. 침지처리 후 모든 조건에서 목재의 중량과 밀도가 약간 증가하는 경향을 나타내었다. 부후처리 후 목초액 침지처리를 한 시험편에 서 낮은 중량감소율이 나타났다. 수종별 비교에서 구실잣밤나무의 침지처리 심재에서 가장 낮은 중량감 소가 나타났다. 목초액을 이용한 침지처리법은 백색 부후균에 의한 목재의 부후저항을 효과적으로 증가 시켰다.
        4,000원
        4.
        2013.09 KCI 등재 서비스 종료(열람 제한)
        KAS360-22 종자에 1998년 250 Gy의 감마선을 조사하였다. 그 후대에서 미이라병에 저항성을 가지는 계통을 선발・육성하여, ‘원율’로 명명하고 2009년에 최종적으로 품종보호권을 출원 신청하여 2012년 등록 완료하였다. 원품종 KAS360-22의 종피색이 노란색인데 반하여 신품종 ‘원율’은 갈색을 나타냈다. 100립중은 재래종 KAS360-22이 17.2 g, ‘원율’은 27.5 g으로 종자무게는 증가하였으며, ‘일품검정콩’(27.4g)과는 별다른 차이를 보이지 않았다. 신품종 ‘원율’의 10a 당 수량은 미이라병 발병 조건에서 233.3 kg으로 재래종 KAS360-22 (24.9 kg)에 비교하여 10.6배 가량 높았고, 대조구 ‘일품검정콩’(121.4 kg)에 비교하여도 1.9배 가량 높아 밥밑용 콩으로 안정적인 수량 확보가 가능할 것으로 사료된다.
        5.
        2012.07 서비스 종료(열람 제한)
        Phomopsis seed decay (PSD), primarily caused by Phomopsis longicolla, is a major contributor to poor soybean seed quality and significant yield loss, particularly in early maturing soybean genotypes. However, it is not yet known whether PSD resistance is associated with early maturity. This study was conducted to identify quantitative trait loci (QTLs) for resistance to PSD and maturity time using a recombinant inbred line (RIL) population derived from a cross between the PSD-resistant Taekwangkong and the PSD-susceptible SS2-2. Based on a genetic linkage map incorporating 117 simple sequence repeat markers, QTL analysis revealed two and three QTLs conferring PSD resistance and maturity time, respectively, in the RIL population. Two QTLs (PSD-6-1 and PSD-10-2) for PSD resistance were identified in the intervals of Satt100-Satt460 and Sat_038-Satt243 on chromosomes (Chrs) 6 and 10, respectively. These QTLs do not overlap with any previously reported loci for PSD resistance in other soybean genotypes. Two QTLs explained phenotypic variances in PSD resistance of 46.3% and 14.1%, respectively. Among three QTLs for maturity time, two (Mat-6-2 and Mat-10-3) were located at positions similar to the PSD resistance QTLs. The identification of the QTLs linked to both PSD resistance and maturity time indicates a biological correlation between these two traits. The newly identified QTLs for resistance to PSD associated with maturity time in Taekwangkong will help improve soybean resistance to P. longicolla.
        6.
        2007.09 KCI 등재 서비스 종료(열람 제한)
        Phomopsis seed decay (PSD) is part of a major fungal disease complex found in most soybean production areas of the world. To establish the genetic linkage map and efficient soybean breeding program, DNA markers were surveyed for polymorphism between PSD resistant (cv. PI 417479) and susceptible (cv. Hwaeomput-kong) varieties. F2, BC1F2, BC2F2 and the corresponding F2:3 population families were used to evaluate the correlation between molecular markers and resistance to PSD. In SSR analysis, Sct_033 was the most significantly associated with PSD resistance among selected eight primers. AF1, AF2, and AF3 were also selected in AFLP analysis. And a few promising lines could be selected from two times of back cross. Especially a breeding line SS01415-8-1 was developed, which has high seed quality such a large seed size, bright hilum color, round shape, and etc. It might be considered a good breeding material for new recommend variety having resistance gene to PSD with good seed quality.