PURPOSES: Spalling is one of the primary problems that lead to the damage of concrete pavements. The purpose of the study is to analyze the impact range of spalling that occurred in an area of concrete pavement by applying a variety of nondestructive and destructive testing methods. METHODS: Spalling of the concrete pavement was categorized into four different sizes, 0 cm, 7.5 cm, 15 cm, and 30 cm. Nondestructive and destructive tests were performed at the point of spalling and 1 m away, respectively, and the obtained results were compared. The nondestructive tests included the electrical resistance test and the ultrasonic velocity test as well as strength tests by Schmidt hammer and concrete tester. The destructive tests included the direct compressive strength test and the chloride content test using field cored specimens. The test results helped in the analysis of the correlation between the current spalling damage condition and the expected damage acceleration. RESULTS: Based on the present study, the repair area and depth of spalling for a partial depth repair was suggested. It was also shown that the size of the spalling is highly correlated with the chloride content and the electrical resistance of the concrete pavement. CONCLUSIONS: The degree of spalling deterioration was found to be highly correlated with the chloride content and electrical resistance of the concrete pavement and based on the results, the extent of repair could be determined more quantitatively.

To calculate proper seismic design load and seismic design category, the exact site class for construction site is required. At present, the average shear-wave velocity for multi-layer soil deposits is calculated by the sum of shear-wave velocities without considering of vertical relationship of the strata. In this study, the transfer function for the multi-layered soil deposits was reviewed on the basis of the wave propagation theory. Also, the transfer function was accurately verified by the finite element model and the eigenvalue analysis. Three methods for site period estimation were evaluated. The sum of shear-wave velocities underestimated the average shear-wave velocities of 526 strata with large deviations. The equation of Mexican code overestimated the average shear-wave velocities. The equation of Japanese code well estimated the average shear-wave velocities with small deviation.

The aim of this study was to evaluate pretreatment methods for 27 pharmaceuticals and personal care products (PPCPs) in various sewage samples using a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) and online solid-phase extraction with LC-MS/MS. Extraction efficiencies of PPCPs in the solid phase under different experimental conditions were evaluated, showing that the highest recoveries were obtained with the addition of sodium sulfate and ethylenediaminetetraacetic acid disodium salt dehydrate in acidified conditions. The recoveries of target compounds ranged from 91 to 117.2% for liquid samples and from 61.3 to 137.2% for solid samples, with a good precision. The methods under development were applied to sewage samples collected in two sewage treatment plants (STPs) to determine PPCPs in liquid and solid phases. Out of 27 PPCPs, more than 19 compounds were detected in liquid samples (i.e., influent and effluent) of two STPs, with concentration ranges of LOQ-33,152 ng/L in influents and LOQ-4,523 ng/L in effluents, respectively. In addition, some PPCPs such as acetylsalicylic acid, ibuprofen, and ofloxacin were detected at high concentrations in activated sludge as well as in excess sludge. This methodology was successfully applied to sewage samples for the determination of the target compounds in STPs.

Ground depression/cave-ins due to subsurface cavities have been occasionally occurred in urban area. To prevent the ground cave-ins, a ground penetrating radar (GPR) method was applied and more than 2,000 subsurface cavities were found in Seoul. For each cavity, excavation was carried out to investigate main cause of the cavity and then the site was restored permanently. It was found that this excavation-and-restoration method was not efficient to repair small size cavities. Instead, grouting methods was used to repair the small cavities temporarily. This study evaluated the field applicability of grouting methods on restoring small cavities. Three types of grouting materials were applied on 12 sections and two non-destructive tests were conducted in field. A falling weight deflectometer(FWD) test was conducted to assess the bearing capacity of the site before and after grouting. Ground penetrating radar (GPR) was used to evaluate the extent of the grouting materials to a cavity. From the FWD test results, the bearing capacity of the Section A and B was enhanced by 7.5% and 13.5% while the bearing capacity of the section C was reduced by 11.5%. It was found from the GPR tests that the grouting materials used in the Section B and C could fill the cavity well and also extended to surrounded area due to injection pressure or selfexpansion. In common, the small cavities could be restored quickly, less than 30 minutes per a cavity by the grouting methods. Hence it can be concluded that the grouting methods can be applicable to restore small cavities. However, it needs to consider the application of grouting methods carefully because the grouting methods can be lost through a pipe link to a cavity. Also, excavations can be conducted occasionally in urban roads so that the stiffness of grouting materials needs to soft enough to be excavated and strong enough to support traffic loads.

The purpose of this study is focused on evaluating the flexural behavior of concrete beam, which are arranged by mechanically spliced reinforcing bar. To compare the existent lapping method with newly registered splicing method, four cases of concrete beam are tested to be failed flexurally by monotonic loading. Based on test results, ductility of specimen mechanically all spliced by parallel threaded coupler is approximately 4 times greater than those of other specimens.

PURPOSES: This study proposes the road asset valuation approach using alternative depreciation methods. It has become necessary to have asset management system according to the adoption of accrual basis accounting for governmental financial reporting and the amendment of the road act. Therefore, it is very important to analyze the effect of depreciation methods on road asset value as a basic research for road asset management system. METHODS: The Ministry of Strategy and Finance (MOSF) has mainly performed road asset valuation based on Write down Replacement Cost and Straight Line depreciation method. This study suggests some appropriate asset valuation methods for road assets through case analysis using three depreciation methods: Consumption-based depreciation method, Condition-based depreciation method, and Straight Line depreciation method. A road asset valuation data of national highway route 1 (year 2014) is used to analyze the effect of three depreciation methods on the road asset value. Road assets include land and structures (pavement, bridge, and tunnel). This study mainly focuses on structures such as bridges and tunnels, because according to governmental accounting standards, land and road pavement assets do not depreciate. RESULTS : The main results of this study are as follows. Firstly, overall asset value of national highway route 1 was estimated at 6.97 trillion KRW when MOSF's method (straight-line depreciation method) is applied. Secondly, asset value was estimated at 4.85 trillion KRW on application of consumption-based depreciation method. Thirdly, asset value was estimated at 4.37 trillion KRW when condition-based depreciation method is applied. Therefore, either consumption-based or condition-based depreciation methods would be more appropriate than straight-line depreciation method if we can use the condition data of road assets including land that are available in real time. CONCLUSIONS : Since road assets such as pavements, bridges, and tunnels have various patterns of deterioration and condition monitoring period, it is necessary to consider a specific valuation method according to the condition of each road asset. Firstly, even though road pavements do not depreciate, asset valuation through condition-based depreciation method would be more appropriate when requirements for application of non-depreciation approach are not satisfied. Since bridge and tunnel facilities show various patterns of deterioration and condition monitoring period by type and condition level, consumption-based depreciation method based on deterioration model would be appropriate. Therefore, it is necessary to have a reasonable asset management system to apply condition-based depreciation method and a periodic condition investigation to manage road assets well.

PURPOSES:In this study, field performance evaluation of crack treatment of pavement and the feasibility of surface treatment of pavement are presented. The performance and cost of preventive maintenance methods have been previously verified, and the methods are being used in many developed countries and cities. However, the performance and cost of the system have not been verified in domestic, field applications. Therefore, in order to improve performance, the field performance is evaluated, and a reasonable cost is proposed.METHODS:Visual Inspection was conducted to evaluate the field application and performance of the preventive maintenance method. In addition, the PCI index was calculated from the results of visual inspection of the application area of the surface treatment method, and the performance life of each method was predicted. For the economic evaluation, life cycle cost analysis was performed using the life cycle cost analysis program.RESULTS:In order to evaluate and quantify the field performance of crack repair material, the residue condition of the pavement surface after crack treatment, rather than the performance of the material, is evaluated. In addition, the crack resistance and performance life of surface treatment methods are evaluated. The cost of currently available treatment methods are compared to the common pavement cut and overlay method, and it is determined that the preventive method is not economical based on life cycle cost analysis.CONCLUSIONS:Because of the characteristics of cracking, it is necessary to conduct the evaluation of currently applied methods and the analysis of the cause of damage, by visual inspection. Moreover, in order to evaluate the performance and economic suitability of the currently applied surface treatment methods, it is necessary to acquire information on application sections by monitoring their long-term conditions and performance.

본 연구에서는 초고층건축물의 풍진동 모니터링을 위한 시스템식별기법의 현장적용성을 평가하였다. 실제 아웃리거-벨트월 을 횡력저항 시스템으로 가지는 실제 63층 RC구조물을 대상으로 상시 및 강풍시 응답을 모니터링하였으며, 진동수영역분해(FDD), 랜덤감소(RDT)기법, 부분공간시스템식별(SSI)법을 사용하여 진동특성을 식별하였다. 건물의 평면이 정방형이고, 두 개의 횡방향 모드의 진동수는 매우 유사하였다. 모든 식별기법에서 태풍과 같이 강한 외력이 존재할 경우 뿐만 아니라 상시미진동 에서도 구조물의 모드 특성을 식별할 수 있었다. 현장에서의 적용성 평가결과, 계산속도는 FDD가 가장 빨랐으며, RDT가 가장 간단한 프로그래밍 절차를 가지고 있음을 확인하였다.

본 연구에서는 플라스틱 온실에서 사용하는 죔쇠의 성능 평가 시 시험편 끝단의 구속조건이 미끄럼 저항력에 미치는 영향을 분석하기 위해 시험편 구속조건을 실험변수로 판형죔쇠의 미끄럼 저항력을 측정하였다. 각 구속조건별로 측정한 미끄럼 저항력의 평균값은 서까래 고정-고정단이 가장 컸으며, 내재해형 죔쇠의 평가 기준 값과 비교한 결과에서도 서까래 고정-고정단의 경우에만 기준을 만족하는 것으로 나타났다. 그러나 서까래 고정-고정단 구속조건은 다른 구속조건들에 비해 산 포도가 상대적으로 크게 나타나 신뢰성이 떨어지는 결과를 보였다. 또한, 일원분산 분석결과에서도 서까래 고정- 고정단은 다른 구속조건들과 비교해 미끄럼 저항력이 유의한 차이를 보였다. 따라서 시험편 구속조건이 미끄럼 저항력 평가에 영향을 미친다고 판단하며 연구자 및 기술자들이 죔쇠의 미끄럼 저항력을 측정할 때에는 시험편의 구속조건이 결과값의 신뢰성에 미치는 영향을 면밀히 검토해야 할 것으로 판단된다.

최근 국내에서는 월성 1호기 및 고리 1호기를 포함하여 운영 중인 원자력발전소가 노후화함에 따라 원전 해체에 대한 관심 이 많이 증대되고 있다. 이와 관련하여 월성 1호기의 계속운전이 최근 결정되었으며, 고리 1호기의 경우 2017년 6월 영구정 지하기로 결정되었다. 이에 본 논문에서는 상업용 원자로로서는 국내 최초로 해체가 예정된 고리 1호기에 대해, 원자로 압 력용기 자체의 해체로 인해 발생하는 방사성폐기물 최종 처분량을 원자로 압력용기 절단 방법 및 방사성폐기물 처분용기를 고려하여 산정하였다. 처분용기를 고려한 방사성폐기물 처분량을 산정한 결과 원자로 압력용기 몸통 부위보다는 반구 형태 의 헤드 부분을 작게 절단할수록 최종 처분량이 감소하는 것으로 예측되었다. 또한 경주 방폐장의 200 L 및 320 L 드럼 처분 용 처분용기의 경우 무게 제한으로 인해 적재효율이 좋지 못한 것으로 나타났다.

Vibrio 속에 속한 세균에 의한 식중독은 오염된 해산물식품의 섭취로 인하여 빈번하게 발생하고 있다. 그러므로 해산물을 날것으로 섭취하는 한국인의 특성을 고려할 때, 빠르고 정확한 Vibrio 검출기술은 식품위생 및 공중보건의 측면에서 매우 중요하다. 이와 관련하여 본 연구에서는 전통적인 배지를 이용한 동정방법의 단점을 보완할 수 있는 생화학적 방법인 Vitek 2 system방법과 분자생물학적 방법인 species-specific PCR 방법을 사용하여 얻은 동정결과를 비교·평가하고자 하였다. 본 연구에서는 5개의 Vibrio 표준균주와 16S rRNA gene sequencing 결과에 의하여 Vibrio 속으로 확인된 24개의 분리균주가 이용되었다. Vitek 2 system방법을 이용한 경우, 이와 같이 본 연구에 사용된 29개 균주 중 Vibrio 표준균주 2개(2/5, 40%), 16S rRNAgene sequencing 결과 Vibrio 속으로 확인된 분리균주 15개(15/24, 62.5%) 등의 총 17개 균주(17/29, 58.6%)가 Vibrio 종으로 동정되었다. 그리고 species-specific PCR방법을 이용한 경우, 위의 29개 균주 중 Vibrio 표준균주 5개(5/5, 100%), 16S rRNA gene sequencing 결과 Vibrio 속으로 확인된 분리균주 16개(16/24, 66.7%) 등의 총 21개 균주(21/29, 72.5%)가 Vibrio 종으로 동정되었다. Vitek 2 system방법과 species-specific PCR방법을 이용하여 동정된 결과를 비교하였을 때 표준균주 중 V. parahaemolyticus, V. mimicus등의 2개(2/5, 40%), 새우분리균주 24개 중에서 16S rRNAgene sequencing 결과 Vibrio 속으로 확인된 분리균주 7개(7/24, 29.2%) 등의 총 9개(9/29, 31%) 균주들에 대한 동정결과만이 일치하였다.

Aggregate Production Planning determines levels of production, human resources, inventory to maximize company’s profits and fulfill customer's demands based on demand forecasts. Since performance of aggregate production planning heavily depends on accuracy of given forecasting demands, choosing an accurate forecasting method should be antecedent for achieving a good aggregate production planning. Generally, typical forecasting error metrics such as MSE (Mean Squared Error), MAD (Mean Absolute Deviation), MAPE (Mean Absolute Percentage Error), and CFE (Cumulated Forecast Error) are utilized to choose a proper forecasting method for an aggregate production planning. However, these metrics are designed only to measure a difference between real and forecast demands and they are not able to consider any results such as increasing cost or decreasing profit caused by forecasting error. Consequently, the traditional metrics fail to give enough explanation to select a good forecasting method in aggregate production planning. To overcome this limitation of typical metrics for forecasting method this study suggests a new metric, WACFE (Weighted Absolute and Cumulative Forecast Error), to evaluate forecasting methods. Basically, the WACFE is designed to consider not only forecasting errors but also costs which the errors might cause in for Aggregate Production Planning. The WACFE is a product sum of cumulative forecasting error and weight factors for backorder and inventory costs. We demonstrate the effectiveness of the proposed metric by conducting intensive experiments with demand data sets from M3-competition. Finally, we showed that the WACFE provides a higher correlation with the total cost than other metrics and, consequently, is a better performance in selection of forecasting methods for aggregate production planning.

The purpose of this study was the analytical safety evaluation on the super-structure of precast modular bridge using standardized modular members and robotic construction during the transportation routing and lifting conditions. In order to evaluate the safety performance of the bridge system, 3-D full scale Finite Element (FE) of 40 m standardized modular block was developed in ABAQUS, followed by the analytical study to classify the structural system according to steel girder structures: 1) modular bridge block lifting method including the steel girder system; 2) modular bridge block lifting method without the steel girder system. The results from the analytical study revealed that the maximum stress of each modular member was within the maximum allowable stresses during lifting condition. However, the stress concentration at the connected area was more critical in comparison to the behavior of 40 m combined modular blocks during lifting time

The deep see riser is often exposed to harsh ocean environment which may cause riser failure. If the riser fails, it may cause serious economical losses as well as environmental problems. Thus, monitoring the integrity of the rider for preventing sudden failure is very important. In this study, the structural behavior monitoring systems installed for the deep sea riser are examined, and, using the estimated behavior, the applicability of the structural integrity evaluation methods is examined via numerical analysis.

This study presented the analytical safety evaluation of precast modular bridge super-structure, using standardized modular members and robotic construction during the transportation routing and lifting conditions. In order to evaluate the safety performance of the bridge system, linear and nonlinear 3D full scale Finite Element (FE) for 12 m and 16 m standardized modular blocks was developed in ABAQUS and then analytical study was classified into two different structural systems according to steel girder structures: 1) modular bridge block lifting method including the steel girder system; 2) modular bridge block lifting method without the steel girder system. As a result, in analytical study, the results revealed that the maximum stress of each modular member was in maximum allowable stresses, during lifting condition. However, the stress concentration at the connected area was more critical in comparison to the behavior of entire modular blocks both 12 m and 16m, during lifting time.

The history of Korea Qualification system began after the Korea War. The Qualification was recognized to it's value with economic growth until the 2000. But the value of qualifications has to be re-evaluated under the current global environments. Almost Previous research has not to work for the value of qualifications all of Korea. So, This study presents a evaluation structure frame to work and some evaluation factors for the qualification value. In addition, the methodology proposed to obtain results using the AHP weights based on the evaluation methodology and questionnaire. The analysis results are used as a basis for selecting the future policy direction of the national qualification.

The efficient safety estimation for a business should analyze an accident data by considering every possible and potential factor. Thus, we consider several factors to build the safety estimation model to meet fairness and rationality. This paper present the yearly statistic data of accident from KOSHA analyze the data by industry, scale, year of service of a employee, age and other factors; build the safety estimation model for the business based on the accident report derived the analysis. The estimation model is established by the weights for accident type, degree, scale, industry, year of service, and age of the employee derived from ANP(Analytic Network Process).