한우에게 급여하는 사료 내 에너지원의 종류에 따라 반추위 미생물의 아미노산 조성에 차이가 있는지를 조사하고자 본 연구를 수행하였다. 국내 한우 비육우 사육에 주로 이용되는 에너지원 사료인 옥수수(T1), 생미강(T2), 소맥(T3) 그리고 소맥피(T4)로 반추위 환경과 유사한 연속식 배양기를 이용하여 72시간까지 배양을 진행하였다. 배양이 진행되는 동안 6시간 간격으로 배양액의 발효 성상을 확인하였으며 pH, NH3-N이 일정하게 유지되는 것을 확인하였으며, 배양 종료 시점인 72시간대에 미생물체 단백질 합성량(MPS), 미생물의 아미노산 조성 및 미생물 균총 변화를 분석하였다. 배양액의 pH는 모든 처리구에서 배양 기간동안 5.5~7.0을 유지하였다. Total VFA 농도는 T1이 23.13 mM으로 가장 낮았고, T4가 29.93 mM으로 가장 높았다(p<0.05). A (acetate) :P (propionate) 비율은 T1이 1.48로 가장 낮았으며, T4가 2.81로 가장 높게 나타났다 (p<0.05). Butyrate는 T1이 2.37 mM으로 가장 낮았으며, T2, T3 그리고 T4는 4.37~4.58 mM으로 차이가 없었다(p<0.05). MPS는 T2 (332.5 mg/L)와 T3 (320.2 mg/L)가 높았고 T1 (137.5 mg/L)와 T4 (154.2 mg/L)로 낮게 나타났다(p<0.05). DGGE band 분석결과 모든 처리구는 57.5 % 이하의 유사도가 나타났다. 미생물의 총 아미노산 함량은 T1 (31.59 %)과 T3 (31.33 %)가 가장 높았으며, T2 (20.09 %)가 가장 낮았다 (p<0.05). 이는 급여된 사료 내 총 아미노산 함량과 반대되는 결과로 나타났다. 따라서, 본 연구에서 한우 급여 에너지원 사료에 따른 반추위 내 미생물 발효 특성과 미생물체 단백질 합성량이 미생물 군집에 영향을 미치며 이에 따라 미생물의 총 아미노산 함량에 영향을 미친다는 것을 확인하였다.

In in vitro fermentation studies, feed samples can either be included in the in vitro rumen medium using filter bags or can be directly dispersed. The objective of this study was to investigate the effects of different pore sizes of filter bags on the rumen fermentation characteristics in an in vitro system. Corn, soybean meal, and timothy were ground to pass through a 1.0-mm screen and were formulated in the ratio of 70:7:23 based on DM, respectively. The formulated experimental diet (2g/DM) was put in F57 filter bags and R510 nylon bags (Ankom®) which pore sizes were 25 and 50 μm, respectively. An in vitro study was conducted to determine the rumen fermentation characteristics for 3, 6, 12, 24, and 48 h and rumen microbial community at 48 h of incubation. A significantly higher production of gas was observed in the R510 bags than in F57 at all the incubation times (p<0.01). IVDMD (p<0.01) and IVNDFD (p<0.01) were significantly higher, whereas pH (p<0.01) and NH3-N (p<0.01) were lower when R510 bags were used. In the VFA composition, acetate and butyrate were significantly higher (p<0.01) in R510 bags, and propionate and total VFA concentration did not differ (p=0.55 and 0.25, respectively) between F57 and R510 bags. The log copy numbers of bacteria and protozoa did not differ (p=0.69 and 0.94, respectively) between F57 and R510 bags, whereas those of fungi were significantly higher in R510 than in F57 bags (p<0.01). Therefore, the use of R510 may reflect actual rumen fermentation characteristics more precisely than those of F57 because increased gas production, nutrient digestibility and acetate, butyrate proportion were founded in R510.

This study was conducted to investigate the effect of pasture grazing and barn feeding system on the growth performance, weight gain and velvet antler productivity in Elk. Twelve 5-year-old elk stags about 273 kg were stratified by weight and randomly assigned by feeding system (a pasture grazing and a barn feeding, n=6). The average feed intake were not signigicant difference between two groups. Average daily gain for grazing and barn feeding group was 0.25 g and 0.29 g respectively, showing no significant difference. Velvet antler yield for grazing and barn feeding group was 7,700 g and 6, 960 g respectively, with no significant difference. In conclusion grazing group was better than barn feeding group in feed intake, body weight gain and velvet antler productivity. However, there were no statistical significant difference between the two group. These results may serve as the basis for further study of deer feeding system in Korea and further study needed to examine the grazing intensity and economic efficiency.

An Automatic feed mechanism is one of the most important systems that make up the air defence gun. The System which consists of consecutive mechanisms from a magazine to the breech of automatic machine gun(Dual) carries ammunitions through the feeding pass with a high speed by the electric boosters to synchronize with gun firing speed. In order to feed the rounds smoothly without jamming, it is necessary to optimize the design of the driving torque needed to carry them and to get a proper distribution of power between rounds after performing mathematical calculation. In this study, in order to predict and prevent malfunctions of feeding and unloading ammunition, we have developed an optimal computational model using CATIA and multi-body dynamics software, ADAMS.

본 연구에서는 공급수의 Blending 및 ERD 적용을 통해 역삼투 공정의 소비전력량을 비교 분석하였다.

Hybridization system, Spraying chamber coating system and aerothermal fluidization spraying (ATFS) system, were tested to find an economic and practical method for vitamin coating. Ae coating by hybridization was done by commercial hybridizer. But both spraying chamber and aerothermal fluidization spraying system were developed by authors for this test. Two vitamins, Vit. E and Vit. C, were employed for coating with four different coating materials, such as eudragit, corn zein, ethylcellulose and gelatin. Coating by hybridization was unsuccessful due to high intake velocity, temperature increase, and bridge formation between vitamin particles. Spraying chamber system was marginally successful to coat vitamins. But the quality of coated vitamin was poor possibly because of the failure of uniform mixing between vitamin and coating materials inside the chamber. Vitamin coating was successfully achieved by ATFS system. The system enables to give not only uniform mixing between coating material and vitamin, but also drying of coated vitamin and uniform diffusion of vitamin particles by thermal aeration. This result was also confirmed through surface micrograph by scanning electron microscope. Therfore, the ATFS system can be considered as a practical system for coating sensitive materials such as vitamins as well as other feed additives.

In this study, a feed-back system for vulnerable urban area by debris flow is suggested in order to carry out effective maintenance. The feed-back system consists of deriving vulnerable elements, providing structural alternatives, analyzing investigation·inspection and investigating damages.

근해의 어족자원 고갈 및 수질오염은 수산양식 산업에 큰 영향을 미친다. 이러한 문제점을 해결하기 위하여 근해에서 외해로 양식장이 이동하고 있다. 외해 양식장은 근해보다 해상환경에 강인하게 개발되어야 하며, 안정적인 양식장 운영을 위해 원격 자동먹이 공급장치가 필요하다. 본 논문은 해상의 양식장에 적합한 원격 먹이공급시스템에 관하여 기술하고자 한다. 어류는 수온 및 어체 중량에 따라 먹이를 먹는 양이 변화한다. 해상 양식장의 경우 육상에 비하여 온도 변화가 크게 일어난다. 본 논문은 수온 및 어체 중량에 따라 먹이량을 계산하고 자동으로 먹이를 공급하는 시스템을 연구하였다. 모형을 활용한 먹이 공급 장치의 성능을 실험하였다.

근해의 수질오염은 수산양식 산업에 큰 영향을 미친다. 이러한 문제점을 해결하기 위하여 근해에서 외해로 양식장이 이동하고 있다. 외해 양식장의 구축을 위해서는 자동먹이 공급장치 및 원격 관리 시스템이 필요하다. 본 논문은 해상의 양식장에서의 자동 먹이 공급 시스템에 관하여 설명하고자 한다. 어류는 수온 및 어체 중량에 따라 먹이를 먹는 양이 변화하며, 해상 양식장의 경우 육상에 비하여 온도 변화가 크게 일어난다. 본 논문은 수온 및 어체 중량에 따라 먹이량을 계산하고 자동으로 먹이를 공급하는 시스템을 연구하였으며 모형 실험을 통하여 먹이 공급 장치의 성능을 검증하였다.