To raise the physical strength of alginate beads, this study manufactured alginate-cellulose bead by adding cellulose to alginate, and wanted to identify whether falginate-cellulose beads were sufficiently efficient in removing heavy metals. To find out optimal amounts of alginate and cellulose injection, this study conducted a pilot study, and repeated experiments proved that alginate 2 w/v% + cellulose 1 w/v% were the optimal amounts in manufacturing beads. Using micro materials tester, this study compared strengths of alginate beads and alginate-cellulose beads. Choosing Cd2+, Pb2+, and Ni2+ as materials to be removed, this study analyzed concentrations of them before and after the treatment. Experiments showed that, compared with alginate beads, the strength of alginate-cellulose beads was 2.26 times stronger, and that the latter could remove 98.22%, 99.99%, and 92.57% of Cd2+, Pb2+, Ni2+, respectively. While addition of cellulose to alginate made the absorption rate drop by about 1%, the beads were still highly efficient in removing heavy metals. Accordingly, it seems that alginate-cellulose beads can be used in removing heavy metals.

In this work, α-Fe2O3 nanocrystals are synthesized by co-precipitation method and used as adsorbent to remove Cr6+, Cd2+, and Pb2+ from wastewater at room temperature. The prepared sample is evaluated by XRD, BET surface area, and FESEM for structural and morphological characteristics. XRD patterns confirm the formation of a pure hematite structure of average particle size of ~ 40 nm, which is further supported by the FESEM images of the nanocrystals. The nanocrystals are found to have BET specific surface area of ~ 39.18 m2 g−1. Adsorption experiments are carried out for the different values of pH of the solutions, contact time, and initial concentration of metal ions. High efficiency Cr6+, Cd2+, and Pb2+ removal occur at pH 3, 7, and 5.5, respectively. Equilibrium study reveals that the heavy metal ion adsorption of the α-Fe2O3 nanocrystals followed Langmuir and Freundlich isotherm models. The Cr6+, Cd2+, and Pb2+ adsorption equilibrium data are best fitted to the Langmuir model. The maximum adsorption capacities of α-Fe2O3 nanocrystals related to Cr6+, Cd2+, and Pb2+ are found to be 15.15, 11.63, and 20 mg g−1, respectively. These results clearly suggest that the synthesized α-Fe2O3 nanocrystals can be considered as potential nano-adsorbents for future environmental and health related applications.

The activated carbon "C" was obtained by carbonization followed by activation with steam at 40% of burn-off. Oxidized carbons C-N, C-P and C-H were obtained by oxidizing the activated carbon C with concentrated nitric acid, ammonium peroxysulfate and hydrogen peroxide, respectively. The textural properties of the carbons were determined from nitrogen adsorption at 77 K. The acidic surface functional groups were determined by pH titration, base neutralization capacity and electrophoretic mobility measurements. The cation exchange capacities of un-oxidized and oxidized carbons were determined by the removal of Cu(II) and Ni(II) from their aqueous solutions. The surface area and the total pore volume decreased but the pore radius increased by the treatment of activated carbon with oxidizing agents. These changes were more pronounced in case of oxidation with HNO3. The surface pH of un-oxidized carbon was basic whereas those of the oxidized derivative were acidic. The removal of Cu(II) and Ni(II) was pH dependent and the maximum removal of the both ions was obtained at pH of 5-6. Cu(II) was more adsorbed, a phenomenon which was ascribed to its particular electronic configuration.

중금속을 처리하는 방법에는 일반적으로 화학적, 물리적 그리고 생물학적 처리방법 등이 있다. 이중 생물학적 처리방법은 미생물들의 자연 생체기작을 이용하는 방법으로, 생체축적 (biosorption & bioaccumulation), 산화환원반응 (oxidation & reduction), 메칠화 및 탈메칠화반응 (methylation & demethylation), 금속 유기물질 복합반응 (metal-organic complexation)과 비용해성 복합

In this study, the effects of single and binary heavy metals toxicity on the growth and phosphorus removal ability of Bacillus sp.. known as be a phosphorus-removing microorganism, were quantitatively evaluated. Cd, Cu, Zn, Pb, Ni were used as heavy metals. As a result of analysis of variance of the half of inhibition concentration and half of effective concentration for each single heavy metal treatment group, the inhibitory effect on the growth of Bacillus sp. was Ni < P b < Z n < Cu < C d. A nd the inhibitory effect on phosphorus removal by Bacillus s p. w as N i < Pb < Z n < Cu < C d. When analyzing the correlation between growth inhibition and phosphorus removal efficiency of a single heavy metal treatment group, a negative correlation was found (R2 = 0.815), and a positive correlation was found when the correlation between IC50 and EC50 was analyzed (R2 = 0.959). In all binary heavy metal treatment groups, the interaction was an antagonistic effect when evaluated using the additive toxicity index method. This paper is considered to be basic data on the toxic effects of heavy metals when phosphorus is removed using phosphorus removal microorganisms in wastewater.

In this research, heavy metals and T-P removal characteristics of plated wastewater are derived using BPC(Break Point Chlorination) process. AA sedimentation pond outflow(Influence) was evaluated for the removal efficiency of heavy metal(Ni) and T-P at a reaction time of 25 minutes by NaOCl input volume(9, 11, 13 and 15 mL). In the case, the higher the NaOCl input volumes, the higher the ORP values were maintained and the higher the removal efficiency tended to be. On the other hand, T-P was judged to have a low relationship between the ORP value and the removal efficiency. In addition, the efficiency of removal heavy metals and T-P in the plated wastewater by injecting 10 mL, 15 mL, 20 mL and 25 mL NaOCl, increased as the amount of NaOCl injected increased, the amount of NaOH input for pH increased. It was found that suspended solid in effluence also increased. It was also observed that the color of the plating wastewater changed from yellowish green to green to charcoal gray to black as the amount of NaOCl injected increased. Treatment characteristics of the reaction time, the longer the reaction time with the substance to be treated after the input of NaOCl, the more the heavy metal removal efficiency tended to increase. Through XRF analysis of the sludge, the constituents in the sludge such as NaCNO, CNCl, Na3PO4, CrO4, 2Na2CrO4 and 2NaNO3 will be analyzed in detail, and the mechanisms of the reaction between the plated wastewater and the complex compound will be elucidated.

Bioremediation has been recognized as a suitable alternative to conventional methods of removing contaminants, and it uses fungi, bacteria and microalgae. In contrast to other organisms, microalgae are unique in that they have the ability to perform photosynthesis like plants and to utilize organic/inorganic carbon substrates, in a process called phytoremediation. Microalgae can populate a reaction site rapidly and enhance the bioremediation efficiency. In this study, Chlorella vulgaris was used to evaluate the removal potentials of the nutrients (N and P) and heavy metals (Cu and Zn) from swine wastewater. The optimum growth conditions for Chlorella vulgaris and the removal potentials of N, P, Cu, and Zn from synthetic wastewater using Chlorella vulgaris were investigated. Based on the results, the applicability of this microalga to on-site wastewater treatment was examined. Optimal growth conditions for Chlorella vulgaris were established to be 28℃, a pH of 7, and light and dark cycles of 14:10 h. As the concentrations of the nutrients were increased, the efficiencies of N and P removal efficiencies by Chlorella vulgaris were decreased in the single and binary mixed treatments of the nutrients, respectively. Further, the efficiencies of Cu and Zn removal also decreased as the heavy metals concentrations added were increased, both in the single and binary mixed treatments. In addition, the efficiency of Cu removal was higher than that of Zn removal. Our results indicate that Chlorella vulgaris could be used in treatment plants for the removal of nutrients and heavy metals from swine wastewater.

도금산업은 국가 핵심역량 사업분야인 전기재료 및 전자 부품 산업등과 밀접한 관계를 가지고 있는 산업분야일 뿐만 아니라, 핵심 부품 및 소재의 기능적 특성과 부가가치를 향상시켜 가격을 결정하는 품질에 큰 영향을 미치는 기반 산업이지만 배출 폐수에는 중금속 이외에도 맹독성 물질인 시안화물과 주요 오염물질이 대량 포함되어 있어 주요 유해물질 배출 관리 대상 업종으로 분류되어 집중 관리되고 있는 실정이다. 이에 소규모 국내 도급업체는 공동 폐수처리장을 통해 폐수를 처리하고 있으나, 도금방법이나 폐수의 특성에 따라 분리 배출되어지지 않고 대부분 통합 배출되어짐으로 인해 처리공정이 복잡하고 처리시설이 방대해지며 많은 처리비용이 소요되고 있어 도급산업을 위축시키는 원인으로 지목되고 있다. 최근 이러한 문제의 해결을 통해 도금산업을 강화하고자 이온성 물질을 분리해 정제할 수 있는 전기투석 기술을 이용한 다양한 연구가 진행되고 있다. 본 연구에서는 전기투석 장치를 이용하여 도금폐수내 구리와 니켈의 제거성능을 평가하였다. 전기투석장치의 이온교환막은 Astom사의 NEOSEPTA를 이용하였고 총 5쌍의 음이온 교환막과 양이온 교환막으로 구성된 스택을 제작하였다. NaCl을 이용하여 TDS 4,000mg/L, 니켈과 구리의 농도를 각각 20mg/L로 제조한 합성폐수를 이용하여 실험한 결과, 한계전류 12v와 25분의 체류시간 조건에서 구리와 니켈은 모두 99%이상 제거되었다. 또한 동일조건에서 유량이 증가할수록 구리와 니켈의 제거효율도 증가하는 경향을 나타내었다. 이온교환막의 변경에 따른 처리성능을 평가한 결과, 이온교환막의 종류에 따라 처리성능에 차이를 나타내어 추가적인 연구가 필요한 것으로 판단된다.

The objective of this study is to investigate the potential use of MSW incineration fly ash as an economic material for the removal of heavy metals (Pb, Mn, Fe, and Cu) from AMD. Batch adsorption experiment was conducted to examine the effects of pH, adsorbent dosage and contact time on metal ions removal in synthetic AMD using MSW incineration fly ash. Precipitation of calcium hydroxide and sodium hydroxide was used for comparison with MSW incineration fly ash by adjusting the pH (5 ~ 11) by coagulation method with 20 min reaction time. Comparing the application of Ca(OH)2 and Na(OH), fly ash proves more efficient which may be due to its porosity and chemical composition. The results from adsorption studies showed that maximum adsorption rate was achieved at 0.4g dose when various fly ash dosages were added to the solution with 60 min optimum time and removal efficiency of heavy metals was over 96%. The effectiveness of fly ash can be related to its high calcium (CaO 55%) content. Efficiency of heavy metals removal was directly linked to the amount of fly ash in the reaction mixture and to the final pH attained. pH plays a significant role in heavy metal uptake. The main removal mechanism was adsorption at the surface of the fly ash together with the precipitation and co- precipitation from the solution with chemicals. Therefore the use of MSW incineration fly ash for treatment of AMD would represent a new market opportunity for this waste product. It can also be useful for neutralizing AMD and possibly reduce its adverse effects to the environment with efficient removal of metal ions from AMD.

Acid mine drainage (AMD) has emerged as one of the greatest environmental threats facing mining industry owing to its characteristic low pH, high acidity and elevated concentrations of metals and sulphate content. This study evaluates the efficiency of fly ash as a low cost material to remove heavy metals (Cu, Fe, Mn and Pb) from AMD. The effects of varying contact time, dosage and pH on adsorption were investigated using synthetically prepared AMD. The experiments was conducted in series of batches for adsorption using a mechanical shaker with 50mL AMD at various dosages of fly ash (0.1 - 0.8g/L) and coagulation using a standard jar tester of 1000mL AMD with chemical coagulant dosages (0.5 - 10g/L). Tests were also conducted with 50mL AMD without fly to evaluate the treatment efficiency of fly ash to chemicals. All tests were performed in duplicate for consistency and accuracy. The chemical composition of fly ash was characterized by X-ray fluorescence (XRF) and the result shows the fly ash is rich in calcium (CaO 54.9%). Leaching test of the fly ash was conducted using KLST and TCLP method to compare the results and evaluate the behavior of leaching ash in replenishing acidic media at low pH such as acid mine drainage. pH plays a significant role in heavy metal uptake in this study with increased in pH value the removal rate increased. The optimum dosage for Adsorption was found to be 0.4g/L with 60 min optimum contact time and coagulation 6mg/L with reduced metal concentrations much less than regulation standards for Cu, Fe, Mn and Pb. From all tests conducted fly ash proves more efficient with over 96% removal even at low dosages. The effectiveness of the treatment process will depend on the quality of the fly ash and the AMD. Therefore the use of fly ash for treatment of mine wastewater would represent a new market opportunity for this waste product. Recycling of fly ash will conserve the natural raw materials and abridge the disposal cost. It will also create new revenues and business opportunities while protecting the environment. Most significantly, the two waste products acid mine drainage and fly Ash could be neutralized and when reacted together to produce much cleaner water broadly compared to post process water derived from Lime treated AMD and sulfates removal rates were in the range of 90% in both experiments. Fly ash is more economical, sustainable.

This research investigated to reduce mass of heavy metals in AMD(acid mine drainage) by microbial mats formed on the channel bed. As, Cd, Cu, Fe, Mn and Zn components were monitored in water and microbial mats, at three points (AMD1, AMD2 and AMD3), in a total of six times. Average daily discharge mass of heavy metals was highest in July, Fe component contained more than 76% of total discharge mass. Discharge mass of heavy metals of AMD and heavy metal contents in microbial mats decreased with downstream at channel. Heavy metal components that average daily discharge mass is over 0.5 kg were Fe, Cu and Zn, and they were highest in July. Average removal efficiency of heavy metals in AMD was highest about 21% in Fe, this microbial mats were due to form from precipitation of Fe component in AMD by aerobic iron bacteria. Relative content for As component in microbial mats than AMD was over 16 times, this As components were due to absorb at iron oxide and iron hydroxide on the surface of microbial mats.

The midge samples were undertaken at three streams, representing different surrounding environments, to investigate the contaminant exposure of midge. The content of heavy metals in midge collected in Singil stream were generally higher as a result of input to the industrial effluents with respect to other streams. Adsorption experiments were done to evaluate the possibility of removing contaminants from water with midge. Diazinon and heavy metals were contaminant target compounds in this study. The removal rate of diazinon in water by midge was 60-75%. In the case of Cu, the removal rate was reached around 90% at the lower initial concentration of 1.87 and 0.81 ppm rather than 4.25 ppm. The reduction of concentration of Cr and Cd according to the lapse of time was similar to the Cu, but their removal rates were shown 50% and 60-74%, respectively. The removal rate of Zn by midge represented relatively high level within the experimental condition. No change in concentration of Cr and As with time were occurred at all experimental conditions. It accounts for the fact that the reduction of Cr and As could not be achieved through the adsorption process, using midge.

The removal characteristics of total petroleum hydrocarbons (TPHs) and heavy metals in contaminated soils with ultrasonic washing have been studied. The ultrasonic washing was evaluated on a laboratory scale. In this investigation, the effects of factors such as ultrasonic frequency, power intensity, duration of irradiation, contents of the TPHs and heavy metals and mixing ratios between the contaminated soils and water, were considered. Experimental results suggested that the rates for contaminant extraction of the TPHs and heavy metals in the contaminated soil increased considerably with the ultrasonic washing. Therefore, the ultrasonic washing has previously been to be an effective method to remediate the contaminated soils with the TPHs and heavy metals.

Hydrochloride acid salts of new N2O2 tetradentate ligands containing amine and phenol N,N'-bis(2-hydroxybenzyl)-o-phenylenediamine(H-BHP), N,N'-bis(5-bromo-2-hydroxybenzyl)-o-phenylenediamine(Br-BHP), N,N'-bis (5-chloro-2-hydroxybenzyl)-o-phenylene-diamine(Cl-BHP), N,N'-bis(5-methyl-2-hydroxybenzyl)-o-phenylene-diamine (Me-BHP) and N,N'-bis(5-methoxy-2-hydroxybenzyl)-o-phenylenediamine(MeO-BHP) were synthesized. The ligands were characterized by elemental analysis, mass and NMR spectroscopy. The elemental analysis showed that the ligands were isolated as dihydrochloride salt. The potentiometry study revealed that the proton dissociation constants(logKnH) of ligands and stability constants (logKML) of transition and heavy metals complexes. The order of the stability constants of each metal ions for ligands was Br-BHP < Cl-BHP < H-BHP < MeO-BHP < Me-BHP.

Waste sludge may be used to recovery wastewater contaminated with heavy metals. The waste sludge is an inexpensive readily available source of biomass for biosorption with metal-bearing wastewater. The biosorption of heavy metals such as Pb(II), Cu(II), Cr(II), and Cd(II) onto waste sludge was investigated in batch experiments and waste sludge loaded heavy metals was separated by dissolved air flotation. The biosorption equibria of heavy metals could be described by Langmuir and Freundich isotherms. The adsorption capacity for waste sludge was in the sequence of Pb(II)>Cr(II)>Cu(II)>Cd(II). The system attained equilibrium about 20 min. The Langmuir and Freundlich adsorption model effectively described the biosorption equilibrium of Cu(II) and Cr(II) ions on waste sludge. Maximum adsorption capacity of Cu(II) and Cr(II) were 196.08 and 158.73 mg/g, respectively. Solid-liquid separation efficiencies were kept above 95% on waste sludge loaded heavy metals, and were decreased with pH increasing.

The thiophene or furan-containing hexadentate ligands 1,12-bis (2-theophene)-2,5,8,11-tetraazadodecane(Thiotrien ․4HCl) and 1,12-bis (2-furan)-2,5,8,11-tetraazadodecane(Furatrien․4HCl) were synthesized as their tetrahydrochloride salt and characterized by EA, IR, NMR, and Mass spectrum. Their protonation constants (logKnH) and stability constants (logKML) for Cd2+, Pb2+, Zn2+ and Cu2+ ions were determined in aqueous solution by potentiometry and compared with 1,12-bis(2-pyridyl)-2,5,8,11-tetra-azadodecane(Pytrien) of pyridyl-containing ligand. The effect stability constants of ligands and metal ion for removal of heavy metals in aqueous solution were described.