본 연구에서는 시가독소 생성 대장균(STEC)을 검출하 기 위해 식품공전의 polymerase chain reaction (PCR)검사 법과 loop-mediated isothermal amplification (LAMP)를 비 교하였다. PCR 및 LAMP의 검출 한계(LOD) 및 정량화 한계(LOQ), 민감도, 특이성 및 효율성을 평가하기 위해 다 양한 식품에 STEC를 접종하였다. LOD는 PCR의 경우 104 CFU/mL 이하, LAMP의 경우 103 CFU/mL 이하로 측정되 었다. LOQ 값은 PCR과 LAMP 간에 차이가 없었다. 그러 나 4가지 식품군에서 민감도는 양념육이 최대 11.1%, 간 소고기가 최소 8.1% 차이가 났다. LAMP는 네 가지 음식 유형 모두에 대해 높은 민감도와 100% 특이도를 보였다. 따라서 LAMP는 식품 유형에 따라 검출률이 비슷하고 특 이도와 민감도가 식품공전 PCR보다 우수하기 때문에 STEC 에 대한 신뢰할 수 있는 분자 검출 방법이다.

Radioactive products generated by long-term operation at NPP can become deposited on the surfaces of the system and equipment, leading to radiation exposure for workers during the decommissioning process. Chemical decontamination is one of the methods to reduce radiation exposure of workers, and there are HP CORD UV, CITROX, CAN-DECON. In the chemical decontamination process, organic acids are generally used, and representative organic acids include oxalic acid and citric acid. There are various methods for removing residual organic acid in decontamination liquid waste, such as using an oxidizing agent and an ion exchange methods. However, there is a problem in that oxidizing agent is used excessively or secondary wastes are generated in excess during organic waste treatment. However, when organic acid is decomposed using a UV lamp, the amount of secondary waste is reduced because it tis decomposed into CO2 and H2O. In this study, organic acid decomposition was evaluated as the contact time of the UV lamp. The experimental equipment consists of a UV reactor, a mixing tank, a circulation pump. The experimental conditions involved preparing 60 L of organic liquid waste containing oxalic acid, hydrogen peroxide and iron chloride. Test A was conducted using one UV reactor, and Test B was performed by connecting two UV reactors in series. As a result of the experiment, a decomposition rate of over 95% was shown after one hour for oxalic acid, and it was confirmed that the initial decomposition rate was faster as the contact time increases. Therefore, in order to increase the initial decomposition rate, it is necessary to increase the contact time of the UV lamp by connecting the UV reactors in series.

홀로그램 이미지를 표시할 수 있는 자동차 리어 램프를 제작했다. 홀로그램은 노광할 때 물체 광은 0도, 참조 광은 60도가 되게 광학계를 설계해 투과 타입으로 제작했다. 홀로그램과 광원을 일체형으로 하면서 두께 30mm의 콤팩트 한 재생 장치를 제작했다. 홀로그램 크기는 200×100mm로 제작했다. 에지릿 홀로그램으로 콤팩트 한 재생 장치에 적 용하기 적합했다. 리어 램프는 미등, 정지등, 방향지시등, 후진등과 홀로그램 재생 장치를 포함 시켜 아크릴로 제작했 다. 리어 램프의 외관은 홀로그램 이미지의 의도와 연결되게 배트맨 모양으로 디자인했다. 에지릿 홀로그램을 이용한 콤팩트 한 재생 장치는 리어 램프의 기능과 연계해 사용하기에 적합하다는 것을 확인하였다.

본 연구에서는 자외선 살균기의 미생물 오염 상태를 분 석하고 위생관리 방안을 제시하고자 하였다. 본 실험에 사 용된 자외선 살균기는 전라남도 소재 일부 보육시설 98곳 의 자외선 살균기를 대상으로 하였다. 일반세균 및 대장 균군은 식품공전 미생물 시험법에 따라 실험하였다. 일반 세균은 98개 보육시설 중 67개소(68.4%), 대장균군은 5개 소(5.1%)에서 검출되었다. 식중독세균 실험 결과 Salmonella spp. 등 6종의 식중독세균은 검출되지 않았지만 B. cereus 는 98개 보육시설 중 1개소(2.8%)에서 검출되었다. 자외선 램프 교체 주기에 따른 일반세균 검출율은 3개월 이내 가 6개 보육시설 중 3개소(50%), 3개월 이상 6개월 이내 가 5개 보육시설 중 3개소(60%), 6개월 이상이 87개 보육 시설 중 61개소(70.1%)로 나타났다. 대장균군 검출율은 6 개월 이내에는 검출되지 않았으나 6개월 이상이 87개 보 육시설 중 5개소(5.7%)로 나타났다. 자외선 살균기의 미 생물 오염도는 램프 교체 주기가 길어질수록 미생물 오염 도가 높게 나타났다. 또한 자외선 램프 교체 주기가 6개 월 이상인 87개 보육시설 중 23개소(26.4%)의 자외선 살 균기 반사판에는 물기가 있고 청소상태가 불량한 것으로 나타났다. 이러한 결과를 종합해 볼 때 보육시설에서 사 용 중인 자외선 살균기의 위생관리를 위해 주기적인 청소 와 자외선 램프 교체가 필요한 것으로 판단된다. 또한 보 육시설 급식담당자들에게 자외선 살균기 청결과 램프 교 체에 대한 지속적인 교육이 필요할 것으로 판단되었다.

In this study, the stability of fishing boat inducing the change of fishing lamp in accordance with the installation of induction lamp in comparison with metal halide lamp was investigated. Inclining test for 8.55 ton class of hair-tail angling fishing boat was performed in order to find a GM and light weight. A stability calculation of the target fishing boat on the basis of KST-SHIP program was evaluated. The stability of the fishing boat with a metal halide lamp such as induction lamp according to the result obtained by the inclining test is slightly different, and the stability is not so much affected. Due to the induction lamp installation, the wind area increased by about 3.178 m 2 . Before installing the induction fishing lamp, G0M was found to be 0.209 at full load departure and 0.296 at departure from fishing ground. After installing the induction lamp, the full load departure condition is 0.178 and the fishing ground departure condition is 0.260. The G0M value before and after installation of the induction fishing lamp shows a difference of about 3% at the full load departure condition. The value of the critical angle of inclination definition showed a difference of about 16%. Despite these differences, it is lower than the regulations; it was confirmed that there will be no significant difference unless it is in an overloaded state.

High-pressure sodium (HPS) lamps have been widely used as a useful supplemental light source to emit sufficient photosynthetically active radiation and provide a radiant heat, which contribute the heat requirement in greenhouses. The objective of this study to analyze the thermal characteristics of HPS lamp and thermal behavior in supplemented greenhouse, and evaluate the performance of a horizontal leaf temperature of sweet pepper plants using computational fluid dynamics (CFD) simulation. We simulated horizontal leaf temperature on upper canopy according to three growth stage scenarios, which represented 1.0, 1.6, and 2.2 plant height, respectively. We also measured vertical leaf and air temperature accompanied by heat generation of HPS lamps. There was large leaf to air temperature differential due to non-uniformity in temperature. In our numerical calculation, thermal energy of HPS lamps contributed of 50.1% the total heat requirement on Dec. 2022. The CFD model was validated by comparing measured and simulated data at the same operating condition. Mean absolute error and root mean square error were below 0.5, which means the CFD simulation values were highly accurate. Our result about vertical leaf and air temperature can be used in decision making for efficient thermal energy management and crop growth.

In this study, we used underwater acoustics to analyze the spatial and temporal distribution characteristics of largehead hairtail (Trichiurus leptueus) based on the luminous thronging of metal halide fishing lamps and induction fishing lamps. As a result, the illuminating power was approximately 1.3 times higher using the metal halide fishing lamp whereas the density of hairtals by distance was approximately 1.9 times higher using the induction fishing lamp. Regarding water depth distribution, hairtails were detected depths of 25-30 m during August and at all water depths in November as assessed using fishing lamps.

This study was carried out to investigate the proper wattage and installation distance for the efficient use of nano-carbon fiber infrared heating lamp (NCFIHL), a heating device advantageous for heating energy saving, when the production of watermelon plug seedlings in the plug seedling nursery in winter season. Six small beds were divided into plastic film, and 700 W and 900 W nano-carbon fiber infrared heating lamps were installed at 100 cm above the bed. 1 lamp at central (control), 60 cm interval (2 lamps), and 40 cm interval (3 lamps) heating lamps were installed in each bed inside the greenhouse. All treatments, except the control, were set to keep the night air temperature at 20℃ after lighting the NCFIHL. The leaf temperature showed a tendency to increase fast as the install distance was narrow. The leaf length and leaf width tended to increase as the installation distance of the 700 W heating lamp was narrow. The compactness was high in 700 W heating lamp with 40 cm of installation distance. Therefore, in consideration of maintaining the set temperature at night, installing 700 W electric lamps at 40 cm was an efficient power and installation distance for watermelon grafted seedlings considering economic feasibility.

Plant growth and morphology are affected by light environments. The morphogenesis and growth of the plants growing in plant factories are different from those grown under sunlight due to the effect of far-red light included in sunlight. The objective of this study was to compare the morphogenesis and growth of cucumber plants grown under artificial sunlight, high pressure sodium lamp (HPS), and HPS with additional far-red light (HPS+FR). The artificial solar (AS) with a spectrum similar to sunlight was manufactured using sulfur plasma lamp, incandescent lamp, and green-reducing optical film. HPS was used as a conventional electrical light source and far-red LEDs were added for HPS+FR. The optical properties of each light source was analyzed. The morphogenesis, growth, and photosynthetic rate were compared in each light source. The ratio of red to far-red lights and phytochrome photostationary state were similar in AS and HPS+FR. There were significant differences in morphology and growth between HPS and HPS+FR, but there were no significant differences between AS and HPS+FR. SPAD was highest in HPS, while photosynthetic rate was higher at AS and HPS. Although the photosynthetic rate in HPS+FR was lower than HPS, the growth was similar in AS. It was because canopy light interception was increased by longer petioles and larger leaf areas induced by FR. It is confirmed that the electrical light with additional far-red light induces similar photomorphogenesis and growth in sunlight spectrum. From the results, we expect that similar results will be obtained by adding far-red light to electrical light sources in plant factories.

고리매개등온증폭법(LAMP)으로 흰등멸구를 특이적으로 구별해낼 수 있는 프라이머 세트(WBPH-65)가 핵내 ITS2영역의 전체염기서 열(KC417469.1)을 바탕으로 설계 제작되었다. WBPH-65는 총 6개의 프라이머, F3 (18 bp), B3 (18 bp), FIP (43 bp), BIP (40 bp), LF (21 bp), LB (25 bp)로 구성되는데, 전체 합한 길이가 165 bp이다. WBPH-65를 흰등멸구, 벼멸구 및 애멸구의 게놈 DNA와 65℃에서 60분간 고리 매개등온증폭 반응시켰을 때, 흰등멸구 시료에서만 증폭 산물들이 관찰되었다. 65℃에서 WBPH-65와 흰등멸구 게놈 DNA의 양과 반응시간을 달리하여 형광반응을 관찰하였을 때 40분 반응에서는 10과 100 ng DNA에서, 60분 반응에서는 0.01, 0.1, 1, 10, 100 ng DNA에서 발광여부 가 명확히 구별되었다. 그러나 20분과 30분 반응에서는 준비된 모든 DNA 양에서 발광여부 구별이 어려웠다. 한편, WBPH-65에서 LF와 BF 프라이머를 뺀 경우 60분 반응에서는 벼멸구, 애멸구 뿐만 아니라 흰등멸구의 게놈 DNA에서도 발광되지 않았다. 본 연구 결과로부터 WBPH-65가 60분 이내 반응에서 흰등멸구를 특이적으로 구별하기 위해서는 6개의 프라이머가 모두 필요하며 최소한 벼멸구와 애멸구를 구별 해낼 수 있음을 확인하였다.

본 연구는 HPS (high-pressure sodium lamp, 고압나트륨등, 700W)와 PLS (Plasma Lighting System, 플라즈마 등, 1,000W) 램프를 이용하여 겨울재배 오이의 보광재배 효과를 구명하고자, 양지붕형 유리온실 3동에 무보광을 대조구로 하여 오이(‘후레쉬’ 품종)를 2015년 11월 2일에 정식하여 2016년 3월 15일까지 재배하였다. 보광은 2015년 11월 20일부터 2016년 3월 15일까지 약 4개월 동안 명기를 14시간/일(일몰 전 약 30분에 점등 개시)으로 정하여 실시하였고, 낮동안의 일사량이 100W·m2 이하일 경우 자동으로 점등이 되도록 제어하였다. 분광투과특성은 PLS의 경우 광합성유효광(400-700nm)이 전반적으로 고르게 분포하나 HPS는 400-550nm 광량이 매우 적은 반면, 550-650nm 광원이 PLS보다 많이 분포되었다. 330-1,100nm 광은 HPS가 PLS에 비해 6% 많았고 UV와 적색광은 비슷하였다. 광합성유효광(400-700nm)은 HPS에 비해 PLS가 12.6% 많았고, 근적외선(700-1,100nm)은 HPS에 비해 PLS가 12.6% 적었으며, R/FR은 HPS가 높았다. 오이의 초장, 엽수, 마디수, 건물중 등의 생육은 무보광에 비해 두 보광등에서 비슷한 수준으로 높았다. 광합성능력은 두 광원 간에 유의적인 차이가 없었다. 오이의 주당 과실 개수(무게)는 무보광 21.2개(2.9kg)에 비해 PLS가 38.7개(5.5kg), HPS가 40.4개(5.6kg)로 1.8~1.9배 많았다. 보광등의 설치비와 전기 에너지 비용을 고려하여 오이 보광재배의 경제성을 분석한 결과, PLS와 HPS 보광등은 각각 37%와 62%의 소득증대효과가 있었다.