본 연구는 장미 ‘Bubble Gum’에 대한 수확 후 LED 광 환경 과 살균제 Azoxystrobin 보존용액 처리 시 절화품질에 미치는 영향을 구명하고자 수행되었다. 광은 백색 LED와 유색 LED (red:blue=5:1)로 처리하였고, 보존용액은 수돗물(tap water, TW)과 Azoxystrobin 0.05 mL･L-1를 처리하였다. 백색 LED처 리의 절화수명은 TW, Azoxystrobin처리구 각각 9.6일, 9.7일 로 LED 광과 보존용액 처리 간의 유의차가 없었다. 유색 LED 처리의 절화수명은 TW처리구가 13.6일, Azoxystrobin처리구 가 9.8일로, 유색 LED 처리구가 대조구(백색 LED + TW)에 비해 절화수명을 4일 연장시켰다. 절화수명 종료 증상은 LED 광 조건과 관계없이 Azoxystrobin처리구는 꽃잎 위조와 청변 화 증상을 감소시켰다. 모든 처리구에서 상대생체중과 수분흡 수율은 각각 처리 후 2일, 4일까지 증가하다 감소하는 경향을 보였다. 수확 직후 대비 처리 6일 후 화색 변화율과 잎의 엽록 소 함량은 수확 직후와 모든 처리구에서 차이가 없었으며, 화 폭증가율도 처리 간 차이가 없었다. 결론적으로 백색 LED + Azoxystrobin 보존용액처리는 절화장미의 꽃잎 위조와 청변화 증상을 감소시키지만, 절화수명 연장효과가 없었으며, 적색 +청색 LED 처리는 장미의 절화수명 연장효과에 효과적이었다.

아토피 피부염(Atopic dermatitis, AD)은 주로 5세 이전에 발병하여 심한 가려움을 동반하는 만성 염증성 피부질환이다. 본 연구의 목적은 NC/Nga 마우스를 AD 유사 증상에 대한 405 nm+ 850 nm LED 광선 치료의 효과를 조사하는 것이다. 마우스는 Normal (Vehicle), 아토피성 피부염 유발군 (CON), 405 nm+ 850 nm LED 광선 치료군 (LED)으로 나누어 난괴법을 이용하여 무작위 배치하여 실험을 진행 하였다. LED 실험군은 하루 10분씩 405 nm+ 850 nm 파장의 LED 치료를 7일 간 실시하였다. LED 광선 치료 연구는 Dermatics 점수의 개선을 측정하고 피부염으로 인한 표피조직 두께 감소를 관찰하였다. LED 광선 요법으로 인한 혈청 IL-1β의 현저한 감소와 경피 수분 손실 및 혈청 IgE 농도 결과를 바탕으로 LED 광선 치료는 아토피 유발 생쥐의 정상적인 피부 상태 회복에 도움을 주었다. 본 연구 결과는 아토피 피부염 마우스 모델에서 적외선 영역의 광선과 blue light 영역의 광선의 동시 조사치료가 아토피 피부염 치료에 뛰어난 효능을 가지며, 두 파장의 LED의 동시 사용 가능성에 대하여 시사하였다.

본 연구는 LED 조명의 파장이 육용종계의 생산성, 번식호르몬, 면역 수준 및 행동에 미치는 영향을 확인하고자 실시하였다. 25주령 아바에이커 192수를 공시하였다. 처리구는 백색(5,000 K), 녹색(520 nm), 황색(570 nm) 및 적색(620 nm) LED 전구를 사용하여 처리구당 6반복, 반복당 8수씩 임의 배치하였으며, 15주간 사양실험을 실시하였다. 산란율은 적색 처리구에서 유의적으로 증가하였고(P<0.05), 난중은 적색 처리구에서 유의적으 로 감소하였다(P<0.05). 수정율, 부화율, 병아리 체중, IgG 수준 및 혈액 생화학 조성은 처리구 간에 통계적인 차이가 없었다. 번식호르몬인 FSH와 LH 농도는 적색 LED 처리구에서 현저히 높게 나타났다(P<0.05). 또한 행동 관찰 결과, 적색 처리구에서 바닥 긁기, 바닥 쪼기 및 깃털 쪼기 행동이 다른 처리구에 비해 유의적으로 높게 나타났다(P<0.05). 본 연구 결과, 육용종계에 LED 점등을 사용할 경우 적색 처리구에서 번식호르몬의 증가와 산란율이 높아지는 것을 확인하였다. 그러나 적색 처리구에서 바닥 긁기, 바닥 쪼기 및 깃털 쪼기 행동이 높게 나타난 원인을 밝히기 위한 추가 연구가 필요한 것으로 보인다. 따라서 산란성적, 번식 호르몬 분비를 고려할 때 육용종계에 적색 LED 조명이 유리하다는 것을 확인할 수 있었다.

This study started from the practical need for a career experience program in the fashion major that is creative and responds to current methodologies. The purpose of this study is to propose a fashion work experience program that combines digital technology and practical experience. The research methods and procedures were as follows: fashion items and wearable devices were selected, the LED smart bag program was developed, and it was executed. A total of 123 students participated in the program, and a satisfaction survey was conducted after observation and oral evaluation. All of the participants completed the LED smart bag processes of design ideation, material selection, production, and styling using an eco-bag (one of the fashion items and as an LED wearable device). As a result of the participants’ satisfaction (on a 5-point scale), most items showed a high level of satisfaction of 4.39 points or more. The smart bag program was evaluated to increase interest based on the time allotted and the students’ level and to bolster their understanding of, and interest in, the fashion major. Therefore, this study is expected to be baseline to explore diversification of the fashion major work experience program, in order to create interest in the fashion major based on creative convergence competency.

Plants under the genus Orostachys have been known as medicinal plants. This study deems to determine the growth and leaf color of Orostachys japonica and O. boehmeri when subjected to various LED light sources. A total of seven LED light treatments were used, i.e. red (630 nm), green (520 nm), blue (450 nm), purple (650 and 450 nm), 3000 K white (455, 600 nm), 4100 K white (455, 590 nm), and 6500 K white (450, 545 nm) LEDs. Results showed that O. japonica plants showed favorable growth under 4100 K white LED, while O. boehmeri plants had a positive growth response under white light LEDs (3000, 4100, and 6500 K). In leaf color analysis, the use of green LED showed the greatest change in CIELAB L * and b * values which were relatively higher compared to other treatments indicating that leaves turned yellowish. Further statistical analysis using Pearson’s correlation also suggested that there is a small negative association between dry weight and b * values of O. japonica, and a negative moderate association between plant weights (fresh and dry weight) and leaf color (L * and b * ) and positive association between said plant weights and a * color values of O. boehmeri. Therefore, it is recommended to cultivate O. japonica under 4100 K white LED and O. boehmeri under 3000, 4100, 6500 K white LEDs.

This study was conducted to investigate growth characteristics of paprika seedlings according to various qualities of LED light (red : blue = 10 : 0, red : blue = 8 : 2, red : blue = 2 : 8, white). Plant height and stem were significantly longer or thicker as red light ratio increased. Leaf area of paprika seedlings with red light was larger or no significant differences in a mixed light of red and blue. Dry weight of seedling was in the same with the result of leaf area. Seedlings with White light was significantly less than others in all characteristics. As red light ratio was increased, relative growth rate increased. As blue light ratio was increased, the net assimilation amount increased. Considering plant height, leaf area and production ability of dry matter per unit leaf area, the using mixed red and blue lights was suitable, especially at a mixed red : blue = 8 : 2.

This study was conducted to determine the changes in ginsenosides content according to additional UV-A, and UV-B LED irradiation before harvesting the ginseng sprouts. One-year-old ginseng seedlings (n=100) were transplanted in a tray containing a ginseng medium. The ginseng sprouts were grown for 37 days at a temperature of 20°C (24h), a humidity of 70%, and an average light intensity of 80 μmol·m-2·s-1 (photoperiod; 24h) in a container-type plant factory. Ginseng sprouts were then transferred to a custom chamber equipped with UV-A (370 nm; 12.90 W·m-2) and UV-B (300 nm; 0.31 W·m-2) LEDs and treated for 3 days. Growth parameters and ginsenoside contents in shoot and root were conducted by harvesting on days 0 (control), 1, 2, and 3 of UV treatments, respectively. The growth parameters showed non-significant differences between the control and the UV treatments (wavelengths or the number of days). Ginsenoside contents of the shoot was highly improved by 186% in UV-A treatment compared to the control in 3 days of the treatment time. The ginsenoside contents of the roots was more improved in UV-A 1-day treatment and UV-B 3-day treatment, compared to the control by 171% and 160%, respectively. As a result of this experiment, it is thought that UV LED irradiation before harvesting can produce sprout ginseng with high ginsenoside contents in a plant factory.

The attraction effects of light emitting diode (LED) trap to Spodoptera exigua and Spodoptera litura adults were evaluated in greenhouse and compared with those of no light trap, which is typical used in commercial trap. At this time, in order to attract these two species of moths, sex pheromone traps were installed at the top side according to the degree of tomato growth inside the tomato cultivation greenhouse around the LED trap. In addition, two types of light-emitting traps (420 nm, 470 nm) were installed in the greenhouse at 1/40 m2, respectively. Also two sex pheromone were installed inside of the greenhouse according to the height of the tomato plants. 10 days later, Blue-light trap(BLB, 470 nm wavelength) was 3.1－3.5 times more attractive than Violet-light trap(VLB, 420 nm wavelength) in S. exigua (105.6 ± 7.3) and S. litura (42.0 ± 3.1) respectively, whereas the no-light trap was little attractive to S. exigua (33.7 ± 2.8) and S. litura (12.0 ± 1.5). On the other hand, after the installation of the sex pheromone trap and the LED trap, there was no damage to S. litura (Fabricius) and S. exigua in the pesticide-free area, indicating a high possibility of control. At this time, the operating cost of the two types of LED traps was 80 won/m2 per unit area, and it was confirmed that both types of moths could be controlled. In addition, as a result of confirming the number of two types of moths caught in the sexual pheromone trap and two types of LED traps after 4 months, it was judged that eco-friendly control was possible as more than 373 moths/trap were attracted to the two types of moths.

Uniform scions and rootstocks should be produced to ensure grafting success. Light quality is an important environmental factor that regulates seedling growth. The effects of warm- and cool-white light emitting diode (LED) ratios on seedling growth were investigated. Scions and rootstocks of cucumber, tomato, and watermelon were grown in a closed transplant production system using LED as the sole lighting source. The LED treatments were W1C0 (only warm-white), W1C1 (warm-white: cool-white = 1:1), W3C1 (warm-white: cool-white = 3:1), and W5C2 (warm-white: cool-white = 5:2). The seedlings grown in W1C1 had the shortest hypocotyls, and the seedlings grown in W1C0 had the longest hypocotyls among the three tested vegetables. The hypocotyls of watermelon scions, watermelon rootstocks, and tomato rootstocks were shortest in W1C1, followed by those in W3C1, W5C2, and W1C0, but there was no significant difference between W3C1 and W5C2, which remained the same as the ratio of cool-white LEDs increased. In addition, tomato scions had the first and second longest hypocotyls in W1C0 and W3C1, respectively, and the shortest hypocotyls in W5C2 and W1C1, along with W5C2 and W1C1, although the difference was not significant. The stem diameter was highest in W1C0 except for tomato seedlings and rootstocks of watermelon. The shoot fresh weight of scions and rootstocks of cucumber and watermelon and the root fresh weight of cucumber scions were lowest in W1C1. These results indicated that different ratios of LED lighting sources had a strong effect on the hypocotyl elongation of seedlings.

Water disinfection using UV-LED(Light emitting diode) has many advantages, such as smaller footprint and power consumption as well as relatively longer lifespan than those of conventional mercury-UV lamps. Moreover, UV-LED disinfection is considered an environmentally benign process due to its mercury-free nature. In this study, disinfection using an LED module emitting 275nm UV was carried out. 384 UV-LEDs were put into a cylinder tube with a capacity of 1.7 liters. The UV intensity of the UV-LED module was controlled from 1.7 to 8.4 mW/cm2. The disinfection efficiency for the model microorganism solutions(E. coli ) was monitored. As the UV intensity(I) and contact time(t) varied, inactivation of the microorganisms from 2 to 4-log-removals(i.e., 99 to 99.99% of disinfection efficiency) was achieved. Disinfection using UV-LED was followed to 1st order reaction and the reaction rate constant, k was determined. In addition, the relationship between UV intensity(I) and contact time(t) in order to obtain 99.99% of disinfection efficiency was modeled: I1.2∙𝑡= 460, which indicates that the product of UV intensity and contact time requiring 4-log-removals is always constant.

목적 : Photobiomodulation 요법은 저출력 레이저 치료기술로, 당뇨망막증, 연령관련황반변성, 망막색소변성증을 포함한 퇴행성 망막질환에 대한 비침습적 치료법으로 제안되고 있다. 최근 광원으로 LED가 널리 사용되고 있으나, 망막에서 LED 기반의 Photobiomodulation에 대한 연구는 매우 부족한 실정이다. 본 연구의 목적은 670 nm LED 광원을 사용한 Photobiomodulation의 망막신경퇴화 억제효과를 조사하기 위해 시행되었다. 방법 : 670 nm LED패널, 반도체 냉각장치, 빛세기 제어기로 구성된 LED 기반의 빛 조사장치를 제작하였다. 망막신경퇴화 유도를 위해 NaIO3를 마우스에 복강주사하였다. 마우스 동공을 확대시킨 후 60 mW/cm2 출력에서 2분 동안 조사하였다. 망막의 광수용세포 손상은 바깥핵층의 두께, 광수용세포 사멸, 광수용단백질인 Rhodopsion, Opsin의 발현, 염증성 사이토카인 유전자의 발현, 뮐러세포의 반응성 신경교증 활성을 통해 분석되었다. 결과 : NaIO3에 의해 손상된 망막에 670 nm LED 빛의 조사는 망막 바깥핵층의 두께 증가, 광수용세포의 사멸 억제, 뮐러세포의 반응성 신경교증 억제, 광수용단백질의 발현 증가를 야기하였다. 결론 : 본 연구는 670 nm LED를 이용한 PBM은 망막 광수용세포의 퇴화를 손상자극 없이 효과적으로 억제할 수 있다는 것을 제시하며, 퇴행성 망막질환 치료에 새로운 전략을 제공한다.

For nearly two years, virtual learning has been employed by most Korean university instructors and students in online teaching environment. A major negative result of prior research on this issue has been a feeling of isolation and desire for more interactions by students. Therefore, this study was conducted to elicit student insights and feelings related to their satisfaction, self-ratings, and advantages and disadvantages of online Teacher-led (TL) versus Student-led (SL) team activities in their online learning environment. A total of 53 freshman students in two general English classes took part in four Zoom group meetings. The surveys and reflection essay were analyzed through qualitative methods. Major findings included: students from both the TL and SL groups reported relatively higher satisfaction and self-ratings of English skills through the four team activities. However, the TL group indicated that there was a lack of emphasis on reading skills, and an overreliance on teacher interventions led to a lack of team cooperation. While the SL group reported that a lack of teacher interaction led to confusion, poor time management, increased Korean use, and fewer listening comprehension opportunities. Implications and a discussion of team activity use in general English programs are included.

Non-verbal communication is important in human interaction. It provides a layer of information that complements the message being transmitted. This type of information is not limited to human speakers. In human– robot communication, increasing the animacy of the robotic agent—by using non-verbal cues—can aid the expression of abstract concepts such as emotions. Considering the physical limitations of artificial agents, robots can use light and movement to express equivalent emotional feedback. This study analyzes the effects of LED and motion animation of a spherical robot on the emotion being expressed by the robot. A within-subjects experiment was conducted at the University of Tsukuba where participants were asked to rate 28 video samples of a robot interacting with a person. The robot displayed different motions with and without light animations. The results indicated that adding LED animations changes the emotional impression of the robot for valence, arousal, and dominance dimensions. Furthermore, people associated various situations according to the robot’s behavior. These stimuli can be used to modulate the intensity of the emotion being expressed and enhance the interaction experience. This paper facilitates the possibility of designing more affective robots in the future, using simple feedback.