검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 50

        1.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Thermal protection systems (TPS) are a group of materials that are indispensable for protecting spacecraft from the aerodynamic heating occurring during entry into an atmosphere. Among candidate materials for TPS, ceramic insulation materials are usually considered for reusable TPS. In this study, ceramic insulation materials, such as alumina enhanced thermal barrier (AETB), are fabricated via typical ceramic processing from ceramic fiber and additives. Mixtures of silica and alumina fibers are used as raw materials, with the addition of B4C to bind fibers together. Reaction-cured glass is also added on top of AETB to induce water-proof functionality or high emissivity. Some issues, such as the elimination of clumps in the AETB, and processing difficulties in the production of reusable surface insulation are reported as well.
        4,000원
        3.
        2022.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The sub-frame is located on the lower body of a monocoque type vehicle and serves as an engine and suspension, and is an important object part that receives a lot of load. The existing press-type sub-frame has a large number of parts for assembling, which causes an increase in cost. Changing the machining form of this part from the existing press-type machining method to the hydro-forming machining method has the advantage of reducing the cost and weight at the same time due to the reduction of the process. Therefore, in this study, the purpose of this study is to change the design so that the sub-frame of the existing press type can be changed to the hydro-forming process method. To this end, we intend to present a design method by analyzing the effect on the rigidity of the sub-frame using the existing machining method through shape optimization analysis.
        4,000원
        4.
        2022.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : Recently, the generation of industrial by-products has been increased owing to the increase in electrical power consumption. This experimental study investigated a special mortar development using outstanding benefits of porous structures in heavy oil fly ash (HOFA) and bottom ash (BA) to reduce heat transfer and weight of tunnel repair mortar. METHODS : Based on the concept of materials usable for this objective being porous and light, the physical and chemical properties of heavy oil fly ash and bottom ash were analyzed to determine the application possibility for tunnel repair mortar. In addition to satisfying this primary requirement, the research aimed at determining the relationships between the characteristics of porous structures and effectiveness of reducing weight and thermal conductivity. This study was undertaken on the use of bottom ash as fine aggregate and heavy oil ash as filler in mortar mix proportion. Four different levels of bottom ash (25%, 50%, 75%, 100%, and 5%), and 10%, 15%, and 20% of heavy oil fly ash were investigated to determine the proper replacement amount within the designed specification. According to the analytic results on the effectiveness of both by-products and chemical additives, the repair mortar with optimum mixture proportion was investigated using various tests including thermal conductivity and porosity. RESULTS : The use of porous by-products increased the demand for mixing water in obtaining the required flowability, but the compressive strength did not decrease significantly in proportion by adding an amount of bottom ash. Based on the results, bottom ash can be replaced with aggregate as much as 50%, but adding an amount of heavy oil ash is suggested as below 10% in formulation. CONCLUSIONS : The optimized repair mortar, which was produced by conclusive formulation, was evaluated as a high-performance material to repair tunnels with the effectiveness of porous and remarkable physical properties.
        4,000원
        5.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The purpose of this study is to establish a scientific and rational structure pavement maintenance technique and management standard through field investigation and analysis method development for measuring damage to structure pavement such that fundamental quality improvement can be promoted and the life of pavement prolonged. METHODS : In this study, the crack, plastic deformation, IRI, and SPI values measured using the existing RoadScanner of a corresponding section, as well as the relative dielectric constant values of a lower deck measured using a ground penetrating radar are reduced. The results of a small impact load test are verified by comparing the modulus of elasticity measured. RESULTS : In the Hongjecheon Overpass, when comparing the suspicion points of deterioration between the center of the lane and the 25 measurement data points of the wheel pass section based on the elastic modulus of the light falling weight deflectometer (LFWD), it is discovered that the lane comprises four centers (16%) and 18 wheelpaths (72%). The percentage of suspected deterioration points in the center is higher than that in the wheelpath. In addition, in the case of the Seoho Bridge, by comparing the suspicious points of deterioration for 11 measurement data points in the middle of the lane and the wheelpath section based on the elastic modulus of the LFWD, it is discovered that five points (45%) in both the middle of the lane and the wheel pass are similar. CONCLUSIONS : In this study, a comparative analysis of the LFWD elastic modulus and SPI factors (crack rate, plastic deformation, and IRI) of the Hongjecheon Overpass and Seoho Bridge is conducted to confirm the factors of pavement breakage. Among them, it is confirmed that it affects the pavement condition the most; however, to consider the LFWD elastic modulus as an evaluation criterion for future structure pavement, the data points must be verified via additional experiments to ensure high reliability.
        4,000원
        7.
        2021.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Weight-based exercise equipment is unreasonable because of its large weight or volume and has limitations in use at home. On top of that, it is not easy to control the weight of domestic muscular exercise devices such as dumbbells and latex bands. This study proposes a new type of exercise equipment that can be used at home by modifying the exercise equipment used in fitness centers. Home training exercise equipment has been optimized by replacing the weight of strength training equipment, which is the core of weight control, with electric motors. For optimal design, process integration and design optimization (PIANO), a commercial PIDO tool, was analyzed in conjunction with DAFUL, a multi-body dynamics analysis program. When formulating the optimal design, the objective function was to minimize the weight, and the shape of the pinwheel and pulley used in exercise equipment was proposed considering the stress of cables as design constraints. As a result of optimization, design proposals were derived while meeting the design requirements and reduced by 5% compared to the initial model. In this work, we have miniaturized the shape of exercise equipment compared to conventional exercise equipment by optimizing its shape.
        4,000원
        10.
        2020.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 도서 지역 화물 및 승객 운송을 맡은 연안 항해용 친환경 차도선을 개발하면서, 검토된 주요 결과들에 대해서 논의한다. 시장에서의 경제성을 확보하기 위하여, 폭 19 m를 최종 개발모델 및 갑판면적에 많은 차량이 배치되도록 고려하였다. 조파저항 감소를 위해 선형 형상은 “V”에 선수벌수를 접목하였으며, 수치해석을 통해 개발 선박의 유체역학적 성능을 확인하였다. 선가를 직접 결정짓는 선각 중량을 감소하기 위하여, 최적화 전문 프로그램에 내재된 다목적 최적화 방법인 파레토 시뮬레이트 어닐링을 활용하여 약 3.9 %의 중량 절감을 달성하였다. 본 연구를 통해서 도출된 주요 결과들은 추후 쌍동형 차도선 관련 연구를 수행하는 엔지니어와 관련 산 업에 좋은 선례가 될 것으로 기대한다.
        4,000원
        11.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Damping and sound absorption not only reduce environmental pollution caused by vibration and noise, but also improves processing accuracy, resolution of precision measuring instruments and fatigue life of machine parts in various precision machines. The vibration-damping plate is largely divided into a constrained type in which the resin is confined by a plate and a non-constrained type in which a plate is made of a polymer material mainly composed of polymer. The external vibration energy is absorbed by the thermal energy required for friction, stretching and compression of resin, so that the noise and vibration generated by resonance are reduced. The vibration damping ability of the sandwich plate produced in this study was found to be somewhat superior, which may be due to the difference in adhesive force during the manufacture of the sandwich plate. In the experimental results, it was confirmed that the sandwich plate material is superior to the vibration damping ability than the 5182 aluminum single plate material, it can be seen that the sandwich plate is effective for vibration damping of the aluminum alloy plate material.
        4,000원
        12.
        2019.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        An aluminium sandwich sheet is the composite adhered by rolling two aluminum panels to one plastic core. If it has the same bending stiffness as an steel sheets, it is about 65% lighter than steel sheet and 30% lighter than aluminum sheet. In present study, we intend to develop application technologies of an aluminum sandwich sheet for auto body panels from selecting composed materials of aluminium sandwich sheets to fabricating prototype. For this study, for the application of a light sandwich sheet to an automotive hood part, ribbing process so called, hemming for which joined between an inner and an outer panel was introduced. From these results, it was found that the sandwich sheet could improve the weight and maintain the flexural rigidity simultaneously comparing to the steel sheet.
        4,000원
        13.
        2018.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구는 전기자동차 충전시스템에서 전력변환장치의 경량화를 위한 최적화 분석프로세스에 대한 내용을 서술하였다. 최적화 설계는 재료 물성치에 대한 설계민감도와 수학적 최적화를 결합하여 주어진 재료량 제한조건 하에 최적의 재료분포를 찾는 설계기법으로 위상의 고정화, 자유도가 묶이는 문제 등을 해결할 수 있는 위상 최적화방법을 사용하였으며, 위상 최적화 방법 중 비교적 수식화가 간단하고 수렴성이 좋은 SIMP법(solid isotropic material with penalization)에 의해 경량화 설계를 수행하였다. 경량화 설계는 3단계의 절차로 구성하였으며, 첫 번째 단계로 전력변환장치의 기본 설계에 대한 유한요소모델을 구성하고, 하중에 대한 정적해석을 수행하였다. 두 번째 단계로 정적해석 결과에 대해 등방성 재료의 강성계수를 적용한 밀도법을 이용하여 위상 최적화를 수행하여 경량화를 위한 최적 형상을 도출하였다. 세 번째 단계로 최적 형상에 대해 차량 탑재 부품의 충격시험기준에 만족하는 반정현파 펄스형태 충격하중을 인가하여 충격해석을 수행하였다. 위상 최적화단계에서 사용 환경조건으로 설계영역 정의는 마운팅 브래킷 영역으로 제한하였으며, 마운팅 브래킷의 설계 최적화를 통해 최종적으로 기본설계대비 20%이상의 경량화가 가능한 설계기술을 확보하였다.
        4,000원
        14.
        2018.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The objective of this study was to develop formability evaluation techniques in order to apply aluminum sandwich panel for automotive body parts. For this purpose, formability evaluation by using FLD (forming limit diagram) was carried out in order to secure the fundamental data for the measurement of sheet metal forming and the establishment of optimum forming conditions of the aluminum sandwich panel. From the results of these formability evaluation, the formability of aluminum alloy sheet which was the skin component for the sandwich panel was higher than that of sandwich panel. In addition, the formability of sandwich sheet which was made by present study was same as that of sandwich panel made by foreign country. Also, it was found that sandwich panel made in present study could have the excellent deep draw-ability when it was compared to the foreign made sandwich panel.
        4,000원
        15.
        2018.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the extrusion process of 6xxx series aluminum cast alloy for high speed train interior or exterior parts are developed. For casting, selection of optimum alloying elements, dissolution technology, de-gassing process, production of molds conforming to the conditions of use, development of casting process control technology for various shapes and materials are performed for the development of high-quality, high strength aluminum alloys. The development of more high farmable extruded aluminum casting alloys for interior or exterior materials has been the scope of this study. The extruded die design was performed for the 6063, 6061 and 6N01 alloy profiles and extrusion test was executed. From these results, the extrusion conditions such as extrusion pressure following as billet temperature and materials were carefully examined.
        4,000원
        16.
        2018.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        A study has been conducted on the structural analysis to reduce the light weight of the electric vehicle rotor shaft. ANSYS Static Structural was used for structural analysis. For weight reduction, the solid shaft was converted into a hollow shaft. The yield strength of the existing material SCM 440 is 655MPa, but to increase its safety, the yield strength is changed to 1,030MPa with SCM822H. At this time, weight reduction of about 47% was achieved. The resonance frequency of the rotor shaft was determined by vibration analysis and the structural safety was analyzed.
        4,000원
        17.
        2018.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this study, the whole process of 6xxx series aluminum cast alloy for high speed train interior or exterior parts are characterized. For casting, selection of optimum alloying elements, dissolution technology, de-gassing process, production of molds conforming to the conditions of use, development of casting process control technology for various shapes and materials are performed for the development of high-quality, high strength aluminum alloys. The development of more reliable lightweight aluminum and aluminum alloy for interior or exterior materials has been the scope of this study. The mechanical properties, and chemical composition of the case materials were evaluated for the 6063, 6061 and 6N01 alloy profiles and compared to the commercial materials and the evaluation results satisfied the standard.
        4,000원
        18.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This study was conducted to compare the difference between left and right extension and flexion isokinetic muscular strength of the knee, shoulder, and trunk to compare absolute and relative strength in lightand heavy weight Ssireum athletes. Fourteen professional Ssireum athletes were divided into the light (Taebaek and Geumgang) and heavy (Halla and Baekdu) groups according to the body weight. Anthropometric measurements and isokinetic strength (knee: 60º/sec, shoulder: 30º/sec, and trunk: 30º/sec) were assessed for the absolute and relative peak torque values. Left (227.6±48.7 vs 247.0± 23.1 Nm, p=0.05) and right knee (233.7±32.0 vs 266.1±20.5, p=0.05) extension strength in absolute values were significantly different between the groups. Trunk’s extension (318.7±37.9 vs 351.2±57.4 Nm, p=0.03) and flexion (249.8±33.0 vs 302.1±42.4 Nm, p=0.03) strength also showed significant difference between the groups. Significant differences were observed for all relative values except for the left knee and trunk flexion. As for the flexion and extension strength ratios, the shoulder extension to flexion ratios of the light group was 1.32 (p=0.02) times and the heavy group was 1.01-0.98 (p=0.34). The trunk extension strength was 3.6 times that of the body weight in the light group and 2.8 times that of the body weight in the heavy group. Heavy Ssireum athletes’ absolute flexor peak torques were higher in the knee and trunk than in the light athletes. Also, the weight per weight of light athletes had relatively higher strength than the heavy athletes. In addition, the muscle strength ratio was higher in the light athletes. This study suggests that isokinetic strength is different in heavy and light weight class Ssireum athletes.
        4,000원
        19.
        2017.04 구독 인증기관 무료, 개인회원 유료
        Recently, as the number of earthquakes has increased, the building structure standard has been revised in 2016. In order to minimize earthquake damage, steel frame is used as the most economical and efficient lateral resistance system. Also, when the steel braces are subject to Compressive load, which causes unstable behavior of the structure. In order to verify the compressive behavior of the reinforced Braces, structural performance tests were conducted with variables of slenderness ratio and the amount of reinforcement. This study investigates the structural performance of existing double - angle steel braces by reinforcing them with non- welded/assembled light-weight steel frames and proposes a suitable reinforced section.
        3,000원
        20.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In order to obtain the goal of the weight reduction of automobile components, the researches about lighter and stronger wheel carriers have been studied without sacrificing the safety of them. In this study, the weight reduction design process of wheel carrier could be proposed based on the variation of von-Mises stress contour by substituting an AA6061 (aluminum 6061 alloy) having tensile strength of 310 MPa grade instead of FCD600 Irons. From the stress analysis results before and after design modification, the stress relaxation was done at every given loading conditions. Therefore, it could be reached that this approach method could be well established and be contributed for light-weight design guide and the optimum design conditions of the automotive wheel carrier development.
        4,000원
        1 2 3