This study was designed to know the possibility in repeat uses of elite donor cows for getting mass production of OPU-derived embryo production (OPU-IVP). Ultrasound transvaginal ovum pick-up (OPU) performed in 6 Korean native cows was aged 4 to 10 years old. The aspiration of immature oocytes for OPU derived embryo was carried out 2 times per week, and OPU-IVP of 1st period was carried out 22∼48 sessions from each donors. And the break time for OPU-IVP of 2nd period after 1st OPU from each donors were 2∼25 months. The OPU-IVP of 2nd period each donors conducted total 15∼65 times for 2∼8 months by an ultrasonographic, was guided follicular aspiration system. The average numbers of collected oocytes, grade 1 + grade 2(G1+G2) oocytes and cleavage embryo from 1st period OPU-IVP were significantly differences between donors (p<0.05). Total collected oocytes of donor D were significantly higher compared with donors of A, B, C, E and F (average 17.0 per session vs. 11.2, 10.1, 8.5, 10.2 and 9.6; p<0.05) and also oocytes of G1+G2 were significantly higher compared with r A and D and subsequently to donors of B, C, E and F (average 7.9 and 8.5 per session vs. 5.0, 2.7, 6.0 and 1.6; p<0.05). Cleavage rate of donor D was significantly higher compared with donors of A, B, C, E and F (average 13.1 per session vs. 10.1, 9.1, 6.9, 8.9 and 6.7; p<0.05). The average numbers of OPU-IVP for 1st period was significantly higher from donors of B, D and E than those from donors of A, C and F (average 6.5, 7.1 and 6.5 per session vs. 3.5, 4.2 and 2.8; p<0.05). The possibility investigation of 2nd OPU-IVP was carried out after 2∼25 months rest periods from 1st period OPU session. Total average numbers of collected oocytes, cleavages and blastocyst development rates were significantly higher from 1st period OPU compared with 2nd period one (p<0.05). The OPU-IVP efficiency by break for more embryo production from elite cow was analysis comparing without rest of donor A, under 6 months rest period as B and over 6 months rest period as C and then the average numbers of collected oocytes, cleavages and blastocysts were significantly higher from A group (11.8, 9.5 and 5.2 per session) than those from B and C groups (7.9, 6.2 and 2.6 vs. 9.2, 7.5 and 3.9, p<0.05), and also C group was significantly higher than B group. In conclusion, 1st period OPU-IVP was more efficient compared with 2nd period repeated uses of donor, and the break times for additional production of embryo on donor were needed more than over 6 months after 1st period OPU-IVP. This repeating uses of elite donor cows given more emphasis for getting the opportunity on mass production of elite cow OPU-IVP embryo should be increased G1+G2 possibility of genetic improvement of livestock within short period.

버섯 세균갈성색무늬병원균인 Pseudomonas tolaasii에 대한 길항미생물로 보고된 Pseudomonas azotoformans HC5 균주의 배양적 특성과 대량 배양을 위한 최적배양조건을 설정하였다. HC5 균주의 생육온도는 10~20oC, pH는 6.0~9.0의 범위에서 왕성한 생육을 보였다. 대량배양을 위한 효율적인 영양원 선발을 위하여 기본배지에 탄소원 fructose 등 18종, 무기질소원 NH4Cl 등 6종, 유기질소원 peptone 등 6종 그리고 아미노산 asparagine 등 11종을 각각 1%씩 첨가하였고, 무기염류 13종을 1 mM 농도로 첨가하여 각각에 대한 생육에 미치는 영향을 조사하였다. 또한 선발된 각각의 영양성분들에 대한 최적 농도를 조사하기 위하여 각각의 성분을 최소 0.1%에서 최대 4.0%까지 배지에 첨가하여 배양 후 생육정도를 조사하였다. 그 결과, 대량배양을 위한 생육최적조건은 온도 15oC, pH 6, 탄소원 0.6% adonitol, 유기질소원 1.5% yeast extract, 무기질소원 0.8% NH4H2PO4,아미노산 0.2% asparagine 그리고 무기염류는 5 mM MgSO4에서 왕성한 생육을 보였다.

Trichogramma is widely used in biological control of many Lepidoptera insect pests in the world. Although many species of host eggs, e.g. Sitotroga cerealela, Corcyra cephalonica, Ephestia kuehniella, Mamestra brassicae and even artificial host eggs are explored in mass production of Trichogramma, eggs dissected from the ovaries in female of Chinese (Oak) tussah moth (Antheraea pernyi) are still the most popular host eggs in China. Here I introduce technology processes of Trichogramma mass production that are popularly used in China, including: 1) selecting female cocoons from mixed sexes commercial cocoons, 2) cold storage of cocoons, 3) warming up the cocoons, 4) collecting female moths and dissecting ovaries, 5) separating, washing and drying host eggs, 6) multiplying Trichogramma with the host eggs, 7) producing Trichogramma products, i.e. the host egg cards, 8) storing Trichogramma under low temperatures, 9) releasing Trichogramma in the field. Nevertheless, problems are frequently encountered in these processes, e.g. high mortality of long-term storage and multiplying too many generations etc. To solve these problems and explore a method for long-term storage, we studied the diapause of T. dendrolimi in detail. We found that the optimal processes for diapause induction were exposing hosts for parasitization at 26℃ for 8 h before keeping them at 26℃ for another 40 h, and finally moving them into 10℃ for 4 weeks. The optimal processes for diapause termination were setting the diapause Trichogramma under 1℃ for two months and then exposing them at 26℃ until their emergence.

버섯 세균갈성색무늬병원균인 Pseudomonas tolaasii에대한 독소저해균으로 보고된 Pseudomonas sp. HC1 균주의 배양적 특성과 최적 배양을 위한 대량배지를 선발하였다. CH1균주의 생육온도는 20~40oC, pH는 5.0~11.0까지넓은 범위에서 왕성한 생육을 보였다. 대량배양을 위한효율적인 영양원 선발을 위하여 기본배지에 탄소원fructose 등 18종, 무기질소원 NH4Cl 등 6종, 유기질소원peptone 등 6종 그리고 아미노산 asparagine 등 11종을 각각 1%씩 첨가하였고, 무기염류 13종을 1mM 농도로 첨가하여 각각에 대한 생육에 미치는 영향을 조사하였다.또한 선발된 각각의 영양성분들에 대한 최적 농도를 조사하기 위하여 각각의 성분을 0.1%에서 4.0%까지 배지에첨가하여 배양후 생육정도를 조사하였다. 그 결과, 대량배양을 위한 생육최적조건은 온도 20oC, pH5, 탄소원 0.9%dextrine, 유기질소원 1.5% yeast extract, 무기질소원0.5% (NH4)2HPO4, 아미노산 3.0% cysteine, 무기염류4mM FeCl3에서 왕성한 생육을 보였다.

Mass production of graphene-based materials, which have high specific surface area, is of importance for industrial applications. Herein, we report on a facile approach to produce thermally modified graphene oxide (TMG) in large quantities. We performed this experiment with a hot plate under environments that have relatively low temperature and no using inert gas. TMG materials showed a high specific surface area (430 m2g-1). Successful reduction was confirmed by elemental analysis, X-ray photoelectron spectroscopy, thermogravimetic analysis, and X-ray diffraction. The resulting materials might be useful for various applications such as in rechargeable batteries, as hydrogen storage materials, as nano-fillers in composites, in ultracapacitors, and in chemical/bio sensors.

Entomopathogenic fungus Aschersonia aleyrodis naturally occurred on citrus whitefly, Dialeurodes citri nymph was often observed in organic citrus orchards, Jeju. The genus Aschersonia is also known to be toxic against scale insects and other pests. However, little is known about artificial media for mass production of spores of Aschersonia species. Grains are excellent sources of media for mass conidia production of various entomopathogenic fungi. The yeast extract, which converts carbohydrates to carbon dioxides and alcohols, contains a large amount of vitamin B complexes which facilitate the carbohydrate metabolism. The more yeast extract content the more conidia production on artificial medium made from commercial corn flour and corn gluten feed. The number of conidium produced on oat, millet, sorghum, and unhulled barley medium containing 1% yeast extract were 1.8, 1.8, 1.6, and 2.1×1010/plate (90mm × 15mm), respectively. However, the greatest yeast effect among four media showed appeared on sorghum medium, which produced 25 times higher spore production than sorghum alone. Furthermore, the conidia from solid sorghum medium could be easily harvested with cell scraper.

[Introduction] Matsutake mushroom (Tricholoma matsutake), an ectomycorrhizal fungus has low activity for polysaccharide hydrolyzing enzymes such as amylase, cellulase and hemicellulase. Therefore, only glucose and a few other monoand di-saccharides can be used to grow this fungus. Then, we examined the possibility for the mass production of the mycelia using the saccharified rice bran as growth substrate. [Methods and Results] For the selection of Kouji-mold, 32 strains of Aspergillus spp. were tested. These fungi were cultivated in potato dextrose liquid (PDL) medium added rice bran and amylase activities were assayed. As a result, Kouji-mold from Isesou Mugi Kouji (Asp. oryzae) was selected to use for saccharification of rice bran. When the saccharified rice bran was used as the growth substrate, the mycelical growth was enhanced. In this mushroom, the dry weight mycelia increased at about 3.0 times (control : 50mg, saccharified rice bran : 160mg, 60days, 24℃) by using saccharified rice bran compared with that of the control without saccharified rice bran. From there results, we see that saccharified rice bran is a useful culture material for the mass production of matsutake mycelia. Chemical analysis in saccharified rice bran solution was done with TLC and HPLC. The large amounts of glucose and maltose were detected in the saccharified solution. Now, we are trying to hydrolyze of cellulose and hemicelluloses components in rice bran using Asp. kawachii or Asp. saitoi isolated from Shouchu kouji.

Mamestra brassicae (cabbage moth) is a common European moth of the order Lepidoptera and the family Noctuidae. The larval stage is highly polyphagous and is known to feed on more than 70 species of host plants from 22 families, including Brassica species, lettuce, onion, potato, pea, tomato and apple. M. brassicae has become a significant pest also in Asia due to the damage caused to agriculturally and economically important Brassica crops. It is difficult to control M. brassicae using chemical insecticide because of its rapid development of resistance. The objective of our study, therefore, was the mass production and formulation of a local strain of M. brassicae nucleopolyhedrovirus-K1 (MabrNPV-K1) for the development of viral insecticide to control it. In production efficiency of MabrNPV-K1 using M. brassicae larvae, the mortality of the 3rd instar larvae was 100% when inoculated with 1.0 × 105 PIBs/larva and the yield of MabrNPV-K1 was maximal. Regarding the mortality, yield of polyhedra, inoculation doses and required time, the 1.0 × 104 PIBs/larva at 30°C was determined as optimal conditions producing polyhedra efficiently. To formulate MabrNPV-K1, feeding toxicities of various supplements including spreader and ultraviolet (UV) -protectant were determined. Tinopal UNPA-GX which is UV-protectants was effective for protection of polyhedra from UV and showed the increased mortality when added with 1% concentration. Other supplements did not influence significantly the mortality of MabrNPV-K1. Formulated MabrNPV-K1 with several supplements showed higher pathogencity than un-formulated MabrNPV-K1.

The present investigation has attemped to optimize hydrogen reduction process for the mass production of Fe-8wt%Ni nanoalloy powder from ball milled powder. In-situ hygrometry study was performed to monitor the reduction behavior in real time through measurement of water vapor outflowing rate. It was found that the reduction process can be optimized by taking into account the apparent influence of water vapor trap in the reactor on reduction kinetics which strongly depends on gas flow rate, reactor volume and reduction.

The Robust Design method uses a mathematical tool called orthogonal arrays to study a large number of decision variables with a small number of experiments. It also uses a new measure of quality, called signal-to-noise (S/N) ratio, to predict the quality from the customer's perspective. Thus, the most economical product and process design from both manufacturing and customers' viewpoints can be accomplished at the smallest, affordable development cost. Many companies, big and small, high-tech and low-tech, have found the Robust Design method valuable in making high-quality products available to customers at a low competitive price while still maintaining an acceptable profit margin. A study to analyze and solve problems of a biochemical process experiment has presented in this paper. We have taken Taguchi's parameter design approach, specifically orthogonal array, and determined the optimal levels of the selected variables through analysis of the experimental results using S/N ratio.