원자전달 라디칼 중합을 이용하여 poly(styrene sulfonic acid) 47 wt%를 가진 poly(vinylidene fluoride-co-chlorotrifluoroethylene)-g-poly(styrene sulfonic acid) (P(VDF-co-CTFE)-g-PSSA) 가지형 공중합체를 합성하였다. 티타늄 아이소프로폭사이드(TTIP)와 가지형 공중합체를 졸-겔 공정을 통하여 TiO2/가지형 공중합체 복합막을 제조하였다. TTIP는 가지형 공중합체의 친수성을 가진 PSSA 영역에만 선택적으로 결합하였으며 그곳에 TiO2 나노 입자가 형성되어 성장하였다. 이와 같은 결과를 적외선과 자외선 분광학으로 확인할 수 있다. 함수량과 이온 교환 능력 (IEC)는 TTIP의 함량에 따라 감소하였고 이것은 막이 가진 술폰산의 수가 감소하기 때문이었다. TTIP가 5 중량%일 때, 막의 기계적 강도는 증가하고 수소이온 전도도도 유지되었다.

Mechanical coating process was applied to form 89 %-hydrolyzed poly vinyl alcohol (PVA) onto boron carbide (B4C) nanopowder using one step high energy ball mill method. The polymer layer coated on the surface of B4C was changed to glass-like phase. The average particle size of core/shell structured B4C/PVA was about 50 nm. The core/shell structured B4C/PVA was formed by dry milling. However, the hydrolyzed PVA of 98~99% with high glass transition temperature (Tg) was rarely coated on the powder. The Tg of polymer materials was one of keys for guest polymer coating on to the host powder by solvent free milling.

A nanocomposite consisting of Fe3O4 and MWCNT was produced via sol-gel technique using FeCl3 along with MWCNT by calcination at 300℃. The degradation effect of rhodamine B dye has been investigated under UV illumination in a darkroom. The degradation reaction was studied by monitoring the discoloration of dye as a function of irradiation time using UV-visible spectrophotometeric technique. The Fe3O4-MWCNT samples have continuous degradation ability under the UV illumination with the first order kinetics and the dye removal was better than in the pristine Fe3O4. The resultant composite catalyst was found to be efficient for the photo-Fenton reaction of the dye.

We have demonstrated the feasibility of using electrospinning method to fabricate long and continuous composite nanofiber sheets of polyacrylonitrile (PAN) incorporated with zinc oxide (ZnO). Such PAN/ZnO composite nanofiber sheets represent an important step toward utilizing carbon nanofibers (CNFs) as materials to achieve remarkably enhanced physico-chemical properties. In an attempt to derive these advantages, we have used a variety of techniques such as field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM) and high resolution X-ray diffraction (HR-XRD) to obtain quantitative data on the materials. The CNFs produced are in the diameter range of 100 to 350 nm after carbonization at 1000℃. Electrical conductivity of the random CNFs was increased by increasing the concentration of ZnO. A dramatic improvement in porosity and specific surface area of the CNFs was a clear evidence of the novelty of the method used. This study indicated that the optimal ZnO concentration of 3 wt% is enough to produce CNFs having enhanced electrical and physico-chemical properties.

Ultrasonic-milling of metal oxide nanopowders for the preparation of tungsten heavy alloys was investigated. Milling time was selected as a major process variable. XRD results of metal oxide nanopowders ultrasonic-milled for 50 h and 100 h showed that agglomerate size reduced with increasing milling time and there was no evidence of contamination or change of composition by impurities. It was found that nanocomposite powders reduced at in a hydrogen atmosphere showed a chemical composition of 93.1W-4.9Ni-2.0Fe from EDS analysis. Hardness of sintered part using 50 h and 100 h powder samples was 399 Hv and 463 Hv, respectively, which is higher than the that of commercial products (330-340 Hv).

Multi-walled carbon nanotube-poly methyl methacrylate (MWNT/PMMA) nanocomposite has been prepared by in situ polymerization of MMA dispersed with MWNTs. The MWNTs were functionalized by nitric acid and sulfuric acid treatment, and this was confirmed by FTIR spectrometer. The solution mixture of MWNTs and MMA was partially polymerized at 80℃, followed by the addition of AIBN and polymerization at 50℃. The MWNT-PMMA composite was prepared by casting the pre-polymer on the glass plate, and the optical properties have been studied using UV-vis spectrometer. The acid treated MWNTs were well dispersed in MMA with fairly good dispersion stability, while flocculation and sedimentation was observed from raw MWNTs in MMA.

[ ] nanocomposite powders with a nominal composition of were prepared by HDDR combined with mechanical milling. The microstructure was studied by Mossbauer spectrometry and TEM. The magnetic properties were investigated by VSM using bonded magnet samples. The results showed that the annealing temperature had significant influence on both the recombination kinetics and the grain size of the and phases, and the bonded magnets presented the best magnetic properties when the nanocomposite powders were prepared by annealing at for 30 min.

일반적으로 탄성체는 특히 고무는 단일성분으로 충분한 물성과 gas barrier성을 나타내지 못하고, 카본블랙과 실리카 등 보강제를 첨가하여 사용되고 있다. 따라서 본 연구에서는 기체 투과성을 낮추기 위해 층상구조를 갖는 점토광물의 일종인 유기실리케이트와 NBR, Ionomer, SEBS (Styrene Ethylene Butadien styrene Copolymer)의 유기탄성체를 이용하여 유기탄성체-clay 나노복합재료 막을 용융법으로 제조하였다. 유기탄성체-clay 나노복합재료 막의 기체 투과 특성은 가압 기체투과장치를 이용하여 실온에서 일정 압력을 유지하며 이산화탄소(CO2), 산소(O2), 질소(N2)가스의 기체투과도를 측정하였다. 유기탄성체-clay 나노복합재료 막은 clay자체의 도입과 층간거리의 확대로 기체분자의 tortuosity를 증가시켜서 기체투과도를 저하시키는 것을 확인하였다.

The effect of Cu content on hydrogen reduction behavior of ball-milled -CuO nanocomposite powders was investigated. Hydrogen reduction behavior and reduction percent() of nanopowders were characterized by thermogravimetry (TG) and hygrometry measurements. Activation energy for hydrogen reduction of nanopowders with different Cu content was calculated at each heating rate and reduction percent(). The activation energy for reduction of obtained in this study existed in the ranging from 129 to 139 kJ/mol, which was in accordance with the activation energy for powder reduction of conventional micron-sized

Ultrasonic-milling of metal oxide nanopowders for the preparation of tungsten heavy alloys was investigated. Milling time was selected as a process variable. XRD results of metal oxide nanopowders ultrasonic-milled for 50 and 100h showed that mean crystallite size reduced with increasing milling time and there was no evidence of contamination or change of composition by impurities. It was found that nanocomposite powders reduced at in atmosphere had a composition of 93.1W-4.9Ni-2.0Fe by EDX analysis. Hardness of sintered samples of 50 and 100h was 390 and 463 Hv, respectively, which corresponds to the hardness of commercial products.

The sintering behavior of titanium-titanium nitride nanocomposite powders has been studied by dilatometry. Titanium. titanium nitride nanocomposite powders were produced by the reactive milling of micron sized titanium powder in nitrogen atmosphere. The Ti-TiN nanocomposite powders milled for various durations along with the initial micron sized Ti powders were then sintered in the temperature range of by a constant rate of heating . The linear shrinkage, shrinkage rate, activation energy for sintering and microstructure has been studied and discussed as a function of milling time.

고분자/층상실리케이트 나노복합체(polymer/layeres silicate nanocomposite, PLSNs) 필름은 보통 내부층을 나트륨과 같은 양이온을 이용한 이온교환을 통해 유기화된 clay로 만든 재료의 새로운 형태이다. 이것은 중합법, 용액법, 그리고 용융법과 같은 다양한 방법으로 제조할 수 있으며, 열경화성, 열가소성이나 탄성고분자와 같은 넓은 범위의 고분자를 기질로 사용할 수 있다. PLSNs 필름은 고분자 사슬이 일정한 간격으로 쌓여있는 실리케이트에 삽입하여 간격을 넓히는 삽입형과 각각의 실리케이트 층이 고분자 기질에 불균일하게 분산되어 형성하는 박리형 두 가지 형태의 구조를 얻을 수 있다. 이러한 새로운 분야의 재료는 보통 5 wt% 이하의 소량의 clay 함유만으로도 향상된 기계적, 열적 특성을 얻을 수 있다. 그리고 clay의 함유량이 증가할수록 기체 투과경로인 tortuosity가 증가하여 기체 투과도가 감소한다.

In-situ processing route was adopted to disperse carbon nanotubes (CNTs) into powders homogeneously. The composite powders with homogeneous dispersion of CNTs could be synthesized by a catalytic route for in-situ formation of CNTs on nano-sized Fe dispersed powders. CNTs/Fe/ nanopowders were densified by spark plasma sintering (SPS). The hardness and bending strength as well as electrical conductivity increased with increasing sintering temperature. However, the electrical conductivity of the composites sintered at above showed decreased value with increasing sintering temperature due to the oxidation of CNTs

키토산 필름은 농업, 식품과 제약 분야에서 응용이 가능하다. 그러나 키토산으로만 만들어진 필름은 기체투과성이 높고 기계적 물성에 약하다. 따라서 본 연구에서는 기체 투과성을 낮추고 기계적 물성을 높이기 위해 층상구조를 갖는 점토광물의 일종인 montorillonite (MMT)와 양이온 생체고분자인 키토산을 이용하여 양이온 교환과 수소결합과정을 통해 Na+-MMT에 키토산을 삽입하여 키토산/Clay 나노복합재료를 제조하였다. 키토산/clay 나노 복합재료의 X-ray 회절패턴에서 2θ=7.5º에서 MMT의 basal reflection이 나타났고, 2θ=3~5º 주위에서의 새로운 약하고 넓은 peak로서 더 낮은 각에서 MMT의 basal reflection의 이동에 의해 삽입된 나노 구조의 형성을 증명하였다. 또한 TGA thermogram를 이용하여 clay의 함유량이 증가할수록 제조된 나노복합재료의 열분해가 일어나는 범위의 질량감소가 줄어드는 것을 확인하므로서 내열성을 관찰하였다. 기계적 물성 성질을 측정하여 clay 함유량의 증가에 따른 인장 강도와 인장 모듈러스의 변화를 관찰하고, 키토산이 층상 실리케이트 내에 삽입하여 제조된 나노복합재료에서 clay의 함유량이 증가할수록 질소 투과경로의 tortuosity를 증가시켜서 기체 투과도를 감소시키는 것도 확인하였다.

Nanostructured and composite powders have been prepared by mechanochemical reaction from mixtures of Ti, BN, and powders. The raw materials have reacted to form a uniform mixture of TiN, and or depending on the amount of used in the starting mixtures, and the reaction proceeded through so-called mechanically activated self-sustaining reaction (MSR). Fine TiN and crystallites less than a few tens of nanometer were homogeneously dispersed in the amorphous or matrix after milling for 12 hours. These amorphous matrices became crystalline phases after annealing at high temperatures as expected, but the original microstructure did not change significantly