In SMEs, technological innovation is recognized as an important tool in terms of sustainable growth. This study analyzed the determinants of technological innovation by using the information of the corporate panel DB composed of local SMEs. The internal factors were added with technological innovation capacity and production capacity and the industrial cluster environment was first applied to external factors. Also, whether the industrial cluster environment influences technological innovation through R&D capabilities, the mediating effect was tested with the Sobel Test. Among the internal and external factors, the most important determinant was marketing ability, and a policy was proposed to develop measures to increase R&D capability with mediating effect. Among the technological innovation variables, which are dependent variables, the most determinant factor was the proportion of new product sales. For this, it is considered that additional research such as longitudinal research with the concept of repetition and parallax using the corporate panel DB is necessary.

The purpose of this study is to identify the leading price between Jeju and Wando’s oliver flounder producer price and to analyze the dynamic effect of the regional producer price using the panel VAR model. In the process of analysis, it was confirmed that there are unit roots in the monthly data of Jeju and Wando’s oliver flounder producer price. So, in order to avoid spurious regression, the rate change of producer price which carries out log difference was used in the analysis. As a result of the analysis, first, the panel Granger causality test showed that the influence of the change rate of producer price in oliver flounder in Jeju was slightly larger than that in Wando, but it was found that each region all leads the change rate of the producer price in oliver flounder. Second, the panel VAR estimation showed that the rate change of producer price in Jeju and Wando a month ago had a statistically significant effect on the change rate of producer price of each region. Third, the impulse response analysis indicated that other regions are affected a little more than the same region in case of the occurrence of the impact on the error terms of the change rate of produce price in Jeju and Wando oliver flounder. Fourth, the variance decomposition analysis showed that the change rate of producer price in the two regions was higher explained by Jeju compared to Wando. In conclusion, it is expected that the above results can not only be useful as basic data for the stabilization of oliver flounder producer price and the establishment of policies for easing volatility but can also help the oliver flounder industry operate its business.

철도소음은 도시지역의 철도건설과 유지에 가장 큰 장애 요소 중 하나이므로 보다 효과적으로 철도소음을 저감하기 위한 연구가 활발히 진행되고 있다. 방음터널은 철도소음을 저감할 수 있는 가장 효과적인 방법 중 하나이나, 하절기 높은 내부 온도 증가로 인하여 궤도좌굴 또는 전력, 신호 등 선로 설비의 안정성을 저하시킬 우려가 있다. 이러한 온도 상승 문제는 통기 형 방음판을 이용하여 해결할 수 있으나, 방음터널 적용 시의 소음저감 성능에 대한 연구는 미흡한 상황이다. 이 논문에서는 수치해석을 통하여 통기형 슬릿방음판의 효과적인 방음터널 적용 방법에 대한 연구 결과를 제시하였다. 수치해석은 음향해석 프로그램인 Pachyderm Acoustics으로 모델링한 복선 방음터널을 이용하여 수행하였다. 철도소음은 기존 연구결과를 이용하여 모사하였으며, 슬릿방음판의 적용 위치가 다른 6가지 경우에 대하여 소음저감 효과 변화를 검토하였다. 음향해석 결과 20% 정도 의 슬릿방음판 적용 시에도 철도소음을 최소 5dB 감소할 수 있는 것으로 나타났다.

In this study, we studied the method of using general architectural glass instead of using the existing acrylic material for high luminance flat lighting. The flat panel lighting used the side illumination method to increase the ease of installation and aesthetic satisfaction. In general, glass has an amorphous structure with a lower angle of refraction than acrylic, so it is not suitable for use in flat panel lighting as a light guide, but in this study, the role of light distribution characteristics and diffusion patterns in the case of using such a glass light guide. Quantitative simulations were conducted to confirm new possibilities. In the simulation, the backlight estimation method was used, and about 10,000,000 rays were placed within a unit area in order to obtain a result similar to the real thing. As a result of the simulation, the geometry of the diffusion pattern could be specified, and the value of the geometry could be quantified using the ratio of the diameter and height of the pattern. As a result of the calculation, it was found that the maximum amount of light was generated around 75 degrees by quantitatively calculating the ratio and the outgoing light angle at which the maximum value of the outgoing light occurred between 05 and 1.0. As a result of these studies, it was confirmed that it is possible to use ordinary glass at the same time as a transparent window and light-emitting lighting at night.

2005년부터 2017년까지 7회에 걸쳐 조사된 WPS를 활용하여 본 연구는 동일방법편의의 영향을 분석하 기 위한 분석유형을 구성한 후 연도별·유형별 회귀분석을 수행하였다. 본 연구의 분석 결과는 다음과 같 다. 첫째, 동일 응답자에 의해 측정된 상이한 개념들 간 상관관계는 상대적으로 높은 반면 다른 응답자에 의해 측정된 동일 개념들 간 상관관계는 상대적으로 낮았다. 둘째, 연도별·유형별 회귀분석 결과 R2는 종 속변수와 동일한 응답자에 의해 측정된 독립변수들이 많을수록 높아지는 패턴을 보였다. 이러한 패턴은 노측 응답으로만 측정된 변수들로 구성된 실증모형 결과에서 보다 강하게 나타났다. 또한 동일방법편의 가 개별 변수들의 추정치와 통계적 유의성에 영향을 미치지만 그 방향과 크기는 다양하게 나타났다. 이 연구결과를 기반으로 연구의 시사점, 한계점과 향후 연구 과제를 제시하였다.

In this study, a researcher transcribed Korean negation sentences presented on four episodes of the [Love of 7.7 Billion] and analyzed the discourses of foreign panel members by focusing on Korean negation sentences. The aims of this study are to (1) analyze types and accuracy of Korean negation sentences in foreign panel members’ discourse and (2) present pedagogical implications for efficient Korean education on negation sentences. This study was launched as an attempt to analyze how correctly and variously foreign panel members in the program use Korean negation sentences in their discourse. Since discourse is closely related to the ordinary life of humans, discourses which appeared on the [Love of 7.7 Billion] would be suitable data to analyze since it is a discussion-based program. Therefore, discourse is useful from a pedagogical standpoint to look into the Korean language proficiency of them. Through discourse analysis, several implications were found. (1) foreign panels tended to use short negation sentences rather than long negation sentences; (2) panels’ use of Korean negation sentences was not various; (3) panels divided Korean negation sentences into often-used negation sentences and rarely-used negation sentences; (4) the use of negative polarity was not found that much.

본 연구에서 적용한 SMRPF system은 구조물 접합부의 패널존을 고려하는 동시에 지진하중에 대하여 각층별 전단력을 산정하여 댐퍼의 감쇠력과 변위를 결정해준다. 이는 내진설계가 반영되지 않은 구조물에 적용할 경우 부재단면을 변경하지 않고 내진성능을 확보 할 수 있는 감쇠기의 역량 결정이 가능함을 보여 주었다. 또한 본 논문에서 적용한 유전자 알고리즘을 통해 최적설계를 수행한 결과, 무보강 구조물에 비해 점성감쇠기와 패널존을 고려한 SMRPF 강골조 구조물의 총 중량이 약 50%이상 감소되는 것이 확인되었다.

The present study is aimed to calculate the optimal damping according to the seismic load on the structure with a non-seismic design to perform structure analysis considering the deformation of structural joint connection and panel zone; to develop design program equipped with structural stability of the steel frame structures reinforced with the panel zone and viscous dampers, using the results of the analysis, in order to systematically integrate the seismic reinforcement of the non-seismic structures and the analysis and design of steel frame structures. The study results are as follows: When considering the deformation of the panel zone, the deformation has been reduced up to thickness of the panel double plate below twice the flange thickness, which indicates the effect of the double plate thickness on the panel zone, but the deformation showed uniform convergence when the ration is more than twice. The SMRPF system that was applied to this study determines the damping force and displacement by considering the panel zone to the joint connection and calculating the shear each floor for the seismic load at the same time. The result indicates that the competence of the damper is predictable that can secure seismic performance for the structures with non-seismic design without changing the cross-section of the members.

Recently, the use of transfer slab system has increased greatly. However, several construction problems are being encountered owing to its excessive thickness. Therefore, in this study, a transfer slab system that uses a reverse drop panel, which can utilize the facility space of the pit floor by reducing the transfer slab thickness, was considered. To investigate the shear behavior of transfer slab system that uses the reverse drop panel, the two-way shear strength of transfer slab-column connection with the reverse drop panel was analyzed using nonlinear FE analysis. In addition, the two-way shear strength evaluations of transfer slab with the reverse drop panel conducted using the existing evaluation methods were verified by comparing the strengths predicted by those methods with the results of nonlinear FE analysis.

The purpose of this paper is to analyze factors affecting the net income of regional and industrial fisheries cooperatives in South Korea using panel data. This paper utilizes linear or GLS regression models such as pooled OLS model, fixed effects model, and random effects model to estimate affecting factors of the net income of regional and industrial fisheries cooperatives. After reviewing various tests, we eventually select random effects model. The results, based on panel data between 2013 and 2018 year and 64 fisheries cooperatives, indicate that capital and area dummy variables have positive effects and employment has negative effect on the net income of regional and industrial fisheries cooperatives as predicted. However, debt are opposite with our predictions. Specifically, it turns out that debt has positive effect on the net income of regional and industrial fisheries cooperatives although it has been increased. Additionally, this paper shows that the member of confreres does not show any significant effect on the net income of regional and industrial fisheries cooperatives in South Korea. This study is significant in that it analyzes the major factors influencing changes in the net income that have not been conducted recently for the fisheries cooperatives by region and industry.

The research model of panel data analysis in this study was used as the dependent variables and the business characteristics of the welding industry were reflected in the research model for systematic analysis of the effect of welding technology on the welding industry. As a result of the existing research, the domestic welding technology is seriously encroaching on the domestic welding industry between the United States, Japan and China. There is no quantitative statistical analysis on this aspect. In this study, the panel data analysis is used to indicate differences in explanatory power by numerical values of POLS model, fixed effect and random effect. And the prior studies on the current status of welding industry related to arc welding, special welding, multiple welding, welding and bonding technology are applied by the panel data analysis. Therefore, the problems of existing research are diagnosed while presenting the future research directions.

열차 소음은 도시 지역 내 철도 네트워크 확장에 주요 장애물이므로 보다 효과적인 소음 방지 수단을 개발하기 위한 연구가 진행되고 있다. 현재까지 방음 터널은 철도 소음에 대한 가장 효과적인 대책 중 하나이나, 중량 문제로 인하여 한정적으로 적용되어 왔다. 이 논문에서는 방음터널의 중량을 효과적으로 감소시킬 수 있는 슬롯형 방음 패널의 소음저감 성능의 예측 가능성을 평가하고, 소음저감 특성을 분석하였다. 연구의 목적을 위하여 음향 해석 프로그램인 Pachyderm Acoustics가 활용되었다. 음향해석의 적절성은 잔향실에서 얻은 실험 데이터를 사용하여 확인하였다. 실험데이터와의 비교 결과, 소음 감소 성능은 음향 분석을 통해 충분히 작은 오차 내로 예측 가능한 것으로 나타났다. 또한 슬롯형 방음판은 설계된 차음주파수 범위에서 약 25dB∼35dB 정도의 소음을 감소시킬 수 있는 것으로 나타났다.

In this study, the structural stability of an align unit was studied to investigate the deformation and vibration characteristics of the upper and lower modules of the align unit during LCD panel transfer. The align unit consists of upper module and lower module. SolidWorks Simulation was used to analyze the structure, fatigue, and modes, to understand the deformation and vibration of the stiffness of the align unit. Because of the upper eccentric structure of the align unit, the main strain was large at the contact of the upper and lower modules and at the bottom of the support, and more pronounced at it’s front. The stress was large in the front support of the upper and lower modules, and the displacement was observed in the front of the upper module. The minimum life cycle that indicates the structural integrity of the align unit has exceeded its usable number. Also, the increase in natural frequency of the align unit gradually slowed down, as the vibration mode increased.