This study was conducted to determine the optimal irrigation starting point by analyzing tree growth, physiological responses, fruit quality, and productivity in peach orchards. Seven-year-old ‘Kawanakajima Hakuto’ peach trees were used in an experimental field (35°49′30.4″N, 127°01′33.2″E) located within the National Institute of Horticultural and Herbal Science located in Wanju-gun, Jeollabuk-do. The irrigation starting point was set with four levels of –20, –40, –60, and –80 kPa from June to September 2022. While there were no significant differences in increase of trunk cross-section area and leaf area among treatments, shoot length and diameter decreased in the –80 kPa and –20 kPa treatments. The photosynthetic rate measured in August was highest for –60 kPa (17.7 μmol·m-2·s-1), followed by –40 kPa (15.6 μmol·m-2·s-1), –20 kPa (14.5 μmol·m-2·s-1) and –80 kPa (14.0 μmol·m-2·s-1). SPAD value measured in May and August was lower in the –80 kPa and –20 kPa treatments than in the –60 kPa and –40 kPa treatments. The harvest date reached three days earlier in the –20 kPa treatment compared to other treatments. The fruit weight was highest in the –60 kPa (379.1 g), followed by –40 kPa (344.0 g), –80 kPa (321.0 g) and –20 kPa (274.9 g). Firmness was the lowest in the –20 kPa treatment. The soluble solid content was highest in the –60 kPa treatment (13.3°Bx).The ratio of marketable fruits was highest in the –60 kPa treatment (50.7%) and lowest in the –80 kPa treatment (23.4%). In conclusion, we suggest that setting the irrigation starting point at –60 kPa could improve the fruit quality and yield in peach orchards.

This research focused on the isolation and characterization of the new strains which can be used as microbial resources for auxin production in the agriculture industry. For the isolation of the new microorganism in the gut of Larimichthys polyactis, a marine agar medium was used and 3 colonies were isolated. Through the 16S-based ID service, isolated strains were identified as 1 strain of Niallia circulans and 3 strains of Proteus mirabilis. Verifying the agriculture industrial values of these isolated strains, the productivity of auxin and activity of various enzymes such as amylase, lipase, and protease were confirmed. As a result, isolated 3 strains showed auxin activity and only protease activities which means the possibility of applying them to the production of effective microorganisms in the agriculture industry.

This paper aims to propose a new systematic approach to analyze the factor productivity and to investigate those characteristics of factor productivity in operational and managerial perspectives. The Cobb-Douglas production function is adopted to estimate the labor and capital productivity. In estimating those productivities the data of The Research on the Actual Condition of Coastal Fisheries (RACF), especially those of Jeon-Nam Province are used. The statistical analysis of RACF data shows that the characteristics are a little bit different between labor and capital of the operational equipment in the coastal fisheries. The Cobb-Douglas type production function is useful in estimating the factor productivity, especially in case of ‘coastal Stow-net fishery’ even though the limited data is used. However, in case of ‘trap fishery,’ the Cobb-Douglas production function appears to have some limitations in estimation. This implies that estimating the factor productivities in fisheries employing broad perspectives and various methods are needed.

This study is aimed to figure out the productivity and variability of cage-aquaculture changes. According to the analysis, the productivity of major fish species has been increasing, except mullet. Although the regional productivity has decreased in the last two years, it has been on the rise considering as a whole. Gyeongsangnam-do showed the highest level of productivity by region. Productivity by species was also higher than other regions in the cases of rock fish, mullet and sea bream followed by productivity of Chungcheongnam-do. The production of marine cage-culture in Jeollanam-do is the second largest in Korea in value/weight while its productivity is lower than that of Chungcheongnam-do. When it comes to comparison by region, Gyeongsangnam-do shows the lowest productivity variation. And Jeollanam-do shows the second-lowest variation in productivity that is only about half of that of Chungcheongnam-do province. Thus, it is found that Jeollanam-do region has an advantage in management stability while its productivity is low. On the other hand, productivity by species was also analyzed. Gyeongsangnam-do has the highest productivity by species for rock fish, mullet and sea bream whereas rock bream productivity is the highest in Jeollanam-do. Therefore, it probably needs to reflect these results when choosing regional-focused incubation fish species.

Sorghum×sudangrass hybrid (Sorghum bicolor (L.) Moench, SSH) is one of the most important summer forage crop and it is widely used for silage in Korea. Agriculture is highly dependent on the climate condition and experiencing significant loss of productivity due to climate change. This study was conducted to investigate the correlation analysis between productivity of forage SSH and climatic factors in Central Northern region of South Korea for 3 years (2017 to 2019). Plant height and dry matter yield of SSH were significantly higher in Gyeonggi-do than Ganwon-do. The productivity of SSH is more closely related with temperature than other climatic factors. Maximum temperature and Growing degree days in May and June showed a positive correlation. However, correlation between production of SSH and precipitation was not clear in this study, but rainy days showed a negative correlation (0.42). In conclusion, temperature is most important climatic factor to the maintenance of plant yield.

본 연구는 우간다 낙농업에 종사하는 197 농가를 대상으로 낙농 생산성 향상을 위해 선호하는 ODA 사업이 무엇인지를 파악하였다. 최고-최저 조정법(Best-Worst Scaling, BWS)을 이용하여 낙농분야 ODA 사업에 대한 우선순위를 결정하였다. 7개 항목 중 1순위와 2순위는 각각 『젖소개량』과『가축질병 관리』로 전체 효용에서 차지하는 1순위와 2순위의 효용은 각각 48.5%와 21.7%로 나타났다. 우리나라의 선진 기술과 지식을 활용하여 농가 선호도가 높은『젖소개량』과『가축질 병 관리』는 낙농분야 ODA 사업으로 실행할 가치가 있다. 본 연구는 ODA 사업 계획 수립에 필요한 기초적인 정보를 제공 하며 정량적 우선순위 결과를 고려한 우간다의 낙농분야 ODA 사업은 효율적으로 현지 주민 만족도 및 낙농 생산성 향상에 기여할 것이다.

The purpose of this paper is to analyze the productivity of the costal fisheries in Jeonnam Province. In this study, the operational characteristics and Cobb-Douglas production function of coastal fisheries were examined based on a research on the actual condition of costal fisheries (RACF). The statistical analysis of RACF data reveals that Cobb-Douglas production function consists of the three variables: fishing quantity per ton-age, the number of fisherman per ton-age and fishing equipment cost per ton-age. The results of this study show us that the relation and productivity between labor and capital of the operational equipment in the coastal fisheries. If extensive comparable biological and market data become available, analysis model can be widely applied to yield more accurate results.

This study examined the current state of the representative support projects for each government that have been promoted to foster local industries. We have identified the changes and focus areas of the supporting industries in the biotechnology and medical industry sectors selected by each region. As a result, we found that most of the support for the bio and medical industry is concentrated in the industrial biotechnology field. We found that continued investment by governments and local governments had an impact on the growth of the biomedical industry In addition, an analysis of the results for 15 years (2002~ 2006) on sales and net profit (net loss) showed that productivity and growth were affected.

본 연구는 정부에서 시행한 종자산업육성정책이 농가 조수입에 어떠한 영향을 미쳤는지를 분석하기 위해 딸기 작물의 사례분석을 시도하였다. 딸기 작물의 종자육성정책의 결과물인 설향 재배와 이의 보급종 지원이 딸기농가의 조수입에 어떤 영향을 미쳤는지를 준모수적 분석방법인 성향점수 방법론과 모수적 분석방법인 생산함수 접근법 및 확률적 프론티어 접근법을 활용하여 분석하였다. 분석결과에 따르 면 설향재배로 인하여 농가조수입이 모두 증가하여 종자산업육성정책의 효과를 계측할 수 있었다. 그러나 보급종 수혜 자체는 그 효과가 미약한 것으로 나타났다.

The goals of enterprises are to use resources efficiently, minimize the costs or reduce unsuitable products with efficient process or production environment and take competitive advantages through efforts such as proper supply of good products, etc. so as to satisfy diversified customers and survive in rough competition. To reduce production costs, it’s inevitable to make unsuitable products during the production in manufacturing process. Therefore, this researcher grasped LED assembly process and drew the results of productivity improvement through process analysis so as to improve productivity by process anlaysis.

In order to propose basic references for the policy making of fishing vessel fishery by Jeju Special Self-Governing Province, we have obtained the basic productivity through analyzing operating days and catches of 16 sample fishing vessels registered in Aewol port, the north of Jeju island in the year of 2011. In addition, to compare with the basic productivity of southern sea area in the Jeju island, that of 7 sample fishing vessels registered in Kangjung port was used. Around Aewol port, average operating days during the main catch period from July to October were over 15 days a month. A average daily catch of fishing vessels was minimum 21.0 kg in May and reached to maximum 54.5 kg in December, showing U-shaped catch pattern through the year. The trend formula of the average daily productivity (y) depending on a tonnage (x) of fishing vessels around Aewol port was described by the equation, y = 18.867 ln(x) + 11.001, and that around Kangjung port in the year of 2009 was understood to be y = 23.271 ln(x) + 25.715. As a result, it seemed that the productivity of fishing vessels around Kangjung port, operating in the southern sea area of Jeju Island, was much greater than that of fishing vessels around Aewol port in the northern sea area of Jeju Island. Especially, that of fishing vessels less than 10 tons was 35-40% more.

가나에서 벼는 옥수수 다음으로 중요한 주곡작물이다. 요컨대, 카사바나 얌에 비하여 보관이 쉽고 취사시간이 적게 소요되는 장점으로 인해 대도시의 바쁜 직장인들을 중심으로 쌀의소비가 늘어나고 있다. 이렇게 가나에서 쌀 소비량은 연간11.8%로 빠르게 증가하고 있는 반면 자급률은 46%에 불과해부족한 쌀을 외국으로부터 수입에 의존하고 있어 국내적으로국제 곡물가 상승에 따른 식량안보 이슈와 재정적인 부담이부각되고 있다.본 연구에서는 가나의 벼 생산성 증대를 통하여 현재15~20% 수준에 불과한 보급종의 생산과 활용도를 높이고자종자생산 및 유통·보급체계를 분석하고 가나의 현실에 적합한보급종 벼 생산을 위한 정책적 대안을 제시하고자 한다. 먼저가나의 벼 종자생산 및 보급체계를 분석한 결과 비공식 품종의 난립, 국내 품종육성 능력 미흡, 국가 품종 보급 및 관리기관의 업무과다와 재정 부족, 보급종에 대한 농민의 낮은 신뢰도 및 정보 부재, 신품종 구입 애로 등이 문제점으로 나타났다. 보급종 종자의 생산과 활용도를 높이기 위해서는 지역단위의 종자생산 클러스트를 구성하여 해당지역에 적합한 벼품종을 선정하고 수요를 파악하여 종자를 생산하는 Semi-informal system이 단기적인 관점에서 정책대안으로 필요할 것으로 판단된다. 또한 종자 판매시스템 개선 및 농업기술의 신속한 전파를 위해서 소셜네트워크 시스템(SNS)을 이용한 정보 제공체계 구축을 제안한다. 농촌지도소 위주의 클러스트 구축에 의한 보급종 생산은 종자의 수급량 예측이 용이하고 지역에 알맞은 적품종의 선정이 가능한 장점이 있다. 농촌지도소를 통한 종자판매는 보급종에 대한 농민의 접근성과 신뢰성 확보에 크게 도움을 줄 수 있어 보급종의 재배확대를 통한 생산성 향상에 기여할 수 있을 것으로 생각된다. 또한 공익적으로 제공하는 문자메시지나 음성메시지 서비스는 농민들에게 최신 품종정보나 영농관련 기술전파에도 활용될 수있을 것이다.

Domestic semiconductor industry grew rapidly enough to draw a close attention in a short period less than twenty years. Korea grew to be the third largest semiconductor manufacturing country in the world during the period and has maintained the proud of Koreans even in technological competitiveness. Accordingly, In this study, it was introduced and analyzed 6 sigma method using profits making analysis for increasing Productivity in the semiconductor manufacturing process.

1. 계획경제체제에서 농업부문의 비효율성 문제가 심각하게 제기되어왔으며, 시장경제로의 체제전환이 이러한 만성적인 농업부문의 비효율성을 극복해 줄 것으로 기대함. 하지만 농업선진국과 체제전환국간에 농업생산성 격차가 상당히 큰 수준이며, 체제전환국 간에도 농업생산성의 차이가 큰 것으로 나타남. 2. 이러한 체제전환국간 농업부문의 성과 차이는 각 국의 부존자원, 초기조건 그리고 이행과정에서의 시장지향적 정책의강도 등에 영향을 받는 것으로 보고되고 있으나 이에 대한 실증연구는 미미한 편임. 따라서 실증분석을 통해 부존자원과 초기조건 그리고 이행과정에서의 정책이나 소유권의 배분 방식등에 따라 생산성으로 계측된 농업부문의 성과가 어떻게 달라지는지를 이해하는 것은 향후 이들 국가의 농업부문의 생산성 제고를 위한 정책 방향 설정에 매우 중요함. 3. 본 논문의 연구목적은 체제전환 국가들의 시장경제로의 편입 이후 농업 생산성의 변화를 실증적으로 분석하고 이러한 생산성 변화의 결정요인 분석을 통해 체제전환국의 농업정책방향 설정에 시사점을 제공하는데 있음. 4. 본 논문의 시사점으로는 (1) 체제전환 이전의 토지 원소유자에게 토지 반환, (2) 시장경제로의 개혁이 원활하게 이루어지도록 정책적제도적 방안 마련, (3) 체제전환정책을 입안함에 있어 특정 국가가 지닌 초기조건 고려임.

This study is prepared on the ground of consulting business in an objective of an improvement of productivity that was proceeded on industrious-purpose reel manufacturer, S corp. the purpose of this study is to achieve an improvement of productivity of the production line of industrious-purpose reel via 4M analysis and separate team activities. The method for study was proceeded with 4M analysis via video recording, one of the steps of separate team activities. Separate team activity is newly established concept, indicating what is modified and expanded partial process among previously existing 6-Sigma methodologies so that measures of various variables in the manufacturing production line are applied. The first procedure is a 4M analysis via video recording. firstly, consultant records videos for relevant process, conducting 4M analysis based on collected data to derive wasting factors in each process. Secondly, it is a procedure to derive and select proper measures, meaning that measures for removing wasting factors based on derived results are elicited, selecting a measure with high probability of application via negotiation between consultants and separate teams. The last procedure is an application of selected measures to real production line, reflecting an environment of production field to derive an effect of increasing practical productivity rather than a qualitative effect as a measure with trust and flexibility.

The goal of this study is to analyze an effect of productivity elevation. For the goal, the various methods of the productivity elevation were suggested and the system improvements were conducted. The S company was established in Ban-Wol Industrial Complex, Ansan-City, Kyonggi-Do on 2007. The company was hiring 22 employees. The main manufactures were heavy duty equipment parts and the amount of sale was two billion won on 2008. Problems which the company faced were ambiguous production target management and materials loss. To solve the problems, NCT work improvement and automatic welding were induced. There were steel saving of 3,780,000won/month and man-hour saving of 144,000won/month by redesign of the steel sheet for the NCT steel job. Also, changing from handwork to automatic welding, the man-hour saving for the welding job was 320M/H and saving of 4,225,600won/month. The others of systematic improvement for productivity elevation were usage of jig and daily equipment checklist.

Competitive capacities in terms of price are rapidly deteriorating since the 1990's due to the competition and rapid pursuit of surrounding nations, exchange rates, increased wages, and labor and management disputes etc. Therefore, this paper shows the significant contents of preceeding research, surveys the employees of small and medium manufacturers who implemented the Toyota production system to conduct various analyses to determine the effect of the operation achievements so as to propose methods to effectively implement the Toyota manufacturing system and maximize long term operational achievements.

Today's fierce competition and global economic recession make most of manufacturing companies in the world difficult to gain a profit. In order to survive such a environment and increase competitiveness, manufacturing companies have to continuously eliminate their wasteful factors through an efficient process analysis, improve quality of products, increase the flexibility of manufacturing processes. In this paper, we consider a case study for the Shanghai New Auto which is a subcontractor of MOBIS in China, to improve productivity by using therblig method, one of the motion analysis, to minimize the work-in-process inventories and to shorten the manufacturing cycle times. We also try to relocate the facility layout to increase the efficiency and flexibility of manufacturing processes.

The purpose if this paper is to analyze the 24 mail center's efficiency and productivity changes from first quarter to fourth quarter of 2008 using window analysis and Malmquist productivity index Row views of window analysis results make it possible to d