Pultruded fiber reinforced polymeric plastic (PFRP) has many advantages such as high corrosion resistance, high specific stength/stiffness, light weight, etc. Pultrusion is a manufacturing process for producing continuous lengths of reinforced polymeric structural shapes with constant cross-section. The mechanical property of PFRP is usually regarded as an orthotropic material. The pultruded structural shapes are usually composed of thin-walled plate element. Because the composite material has relatively low elastic moduli, the design of pultruded compression members may not be governed by the material strength limit state but by the stability limit state such as the local buckling. Therefore, the stability limit state must be checked to design pultruded thin-walled compression members. In this paper, we present the analytical study results of elastic buckling strength of PFRP orthotropic plates with different fiber volume ratios. The local buckling analysis of pultruded compression members was conducted for various composite materials using the closed-form solution. From the study it was found that if E11/E22 is increased then the plate buckling coefficient, hence the plate buckling strength, is decreased.

본 연구는 순수 면내모멘트를 발생시키는 선형적으로 변하는 수직응력을 받고 있는 단순지지된 마주보는 두 모서리와 자유경계를 가지는 직사각형 판의 자유진동과 좌굴의 엄밀해를 구하였다. 정현적으로 가정된 하중방향(x)으로의 변위함수는 단순지지 경계조건을 만족시키며, 평판을 지배하는 편미분 운동방정식 을 y 방향으로의 변계수를 갖는 상미분방정식으로 만든다. Frobenius법을 통하여, y방향으로의 멱급수를 가정하면 이 식을 엄밀하게 풀 수 있으며, 그 식의 합당한 계수를 구할 수 있다. 자유경계조건을 y=0과 b에 적용하면, 고유진동수와 임계좌굴모멘트를 구할 수 있는 4차의 특성행렬식이 만들어진다. 본 논문에서는 이 급수해의 수렴성이 면밀히 조사되었으며, 임계 좌굴모멘트의 수치결과와 모드형상이 주어진다. 상대적으로 정확도가 떨어지는 1차원적인 보 이론으로 구한 결과치와의 비교연구가 이루어진다. 또한 자유진동수와 모드형상 주어진다. 프와송비(v)의 변화에 따른 좌굴모멘트와 고유진동수의 변화가 도표로 주어진다.

An exact solution procedure is formulated for the free vibration and buckling analysis of rectangular plates having two opposite edges simply supported when these edges are subjected to linearly varying normal stresses. The other two edges may be clamped, simply supported or free, or they may be elastically supported. The transverse displacement (w) is assumed as sinusoidal in the direction of loading (x), and a power series is assumed in the lateral (y) direction (i.e., the method of Frobenius). Applying the boundary conditions yields the eigenvalue problem of finding the roots of a fourth order characteristic determinant. Care must be exercised to obtain adequate convergence for accurate vibration frequencies and buckling loads, as is demonstrated by two convergence tables. Some interesting and useful results for vibration frequencies and buckling loads, and their mode shapes, are presented for a variety of edge conditions and in-plane loadings, especially pure in-plane moments.

A system of equations is developed for the theory of bending of thick orthotropic elastic plates which takes into account the transverse shear deformability of the plate. This system of equations is of such nature that three boundary conditions can and must be prescribed along the edge of the plate, i.e. ω=0, Mx=0, Mxy=0(ω=O, My=O, Mxy=0) at simple supported edges. It can be obtained general solution that is added complementary solution ωe and paticular solution ωp by an assumption of solution function. In the next paper, this analytical results will be obtained for perforated thick plates.

Two perforated plates(a square plate and a rectangular plate having an as야ct ratlO 1.57(L,=11, L,= 7)) are taken as analysis examples. Each of these plates is given some changes in the boundary ∞nditions. The size of cutouts as well as their locations are also changed in order to examine the variation of two eigenvalues corresponding to the fundamental mode. The relationship between two eigenvalues is estab!ished by changing the magnitude of edge thrust

본 논문은 초기하중을 받는 직사각형판 및 역대칭 Angle-Ply 적층판의 좌굴 및 진동특성을 무재하시의 고유진동수를 이용하여 산정하는간편법을 제시하였다. 마주보는 두변이 단순지지된 직사각형판의 운동방정식은 곡률항을 고려한 Mindlin 판이론과 에너지원리를 이용한 Rayleigh-Ritz법을 이용하여 유도하였다. 초기응력을 받는 직사각형판의 무차원화 고유진동수, 임계좌굴계수 및 동적불안정영역 문제들을 무재하시의 무차원화 고유진동수로서 각각의 특성을 정립하였다. 본 연구에서 제안한 진동특성에 관한 간편산정식의 타당성과 사용성을 입증하기 위해 수치예를 들어 검토하였다.