In this paper, tin-waste resources were pulverized and separated by cut-mill and multi cyclone separator, respectively. After the cut-mill process, more than 98% of the Pb-Sn and Sn-Ag-Cu scraps were recovered, and the by-products consisting of metal and oxide could be reused as solder. The separation of pulverized powders was performed using the minimum fluidization velocity depending on the density of the materials. When the flow rate was 21 L/min (70% blower output), it had the highest separation efficiency.

Electrochemical reductive extraction of tin from semiconductor plating process wastewater was experimented using synthetic wastewater. Copper and graphite plate were used as a cathode and an anode, respectively. The tin extraction could be optimized in pH 0.5 and polar space of 60 mm. The extraction rate of tin per minute was increased as current and initial tin concentration increased, and more than 87% and 97% of tin could be extracted within 80 minutes at 500 mg/L and 1,000 mg/L of initial tin concentration, respectively. The electrochemical reaction orders and kinetic coefficients were 1.24 ~ 1.26 and 0.004 ~ 0.006 (L/mg)(n − 1)min−1. The residual concentration of tin could be expressed as Ct= (Co −0.246+ 0.0012t)−4.065.

A TIN, Triagulated Irregular Network, based topographic modeling method and a distributed rainfall-runoff model using the topographic representation is presented. In the TIN based topographic representation, a watershed basin is modeled as a set of contig

3차원 수치고도지도 및 TIN모듈을 이용하여 SCS법에 의한 유효강우량 산정방법을 제안하였다.유역사면경사 증가에 대한 유출곡선지수의 증분치(2%, 3%)를 고려하여 유효강우량을 산정한 결과, 호우사상에 따라 약 5.90%~12.0%의 차이를 나타내었다. 따라서 우리나라 대부분의 하천유역과 같ㅇ. 고도차가 큰 일반 산지하천유역에서 SCS법에 의한 유효강우량 산정시에는 유역사면경사를 고려한 해석이 보다 합리적인 것으로 판단되었다.