Integrity evaluation scheme for Spent Fuel (SF) dry storage has been developed under transportation failure modes. This method especially considered the degradation characteristics of Spent Fuel (SF) during dry storage such as radial and circumferential hydride content, hydride volume fraction, oxide thickness, etc. Hydride and zircaloy cladding are considered as material composite system, using correlation models related to material properties. Critical Strain Energy Density (CSED) is compared with Strain Energy Density (SED), to evaluate cladding integrity. CSED serves as material characteristics, while SED can be considered as boundary condition. To calculate the CSED of cladding in the lateral failure mode, circumferential hydride concentration is used. SED is calculated considering both the bending moment and axial load. On the other hand, in the longitudinal failure case, fuel rod temperature, internal pressure, hoop stress, radial hydride concentration is used to calculate CSED. And pinch force (contact) was considered to evaluate SED. Model validations were conducted by comparing hot cell SF test and existing validated evaluation results. To separately handle normal transportation conditions from hypothetical accident conditions, SED according to stress-strain analysis results was separated into elastic and plastic regions. As a result of applying this scheme for 14×14 SF, failure probability of normal condition was zero, which is the similar result with DOE and same with EPRI. Regarding accident condition, lateral case showed similar result, but longitudinal case showed different but reasonable result, which was due to the different analysis conditions. The proposed methodology which was indigenously developed through this study is named as K-method.

The food delivery platform labor market has been continuing to grow rapidly in Korea, which resulted in traffic accident increases of delivery riders. To prevent traffic accidents while delivery, this study conducted a survey for 462 delivery riders and analyzed the statistical relationships of delivery characteristics and risk perception with delivery accidents. The results of this study revealed that riders with young age (20s: 46.6%) and/or low delivery experience (less than 1 year: 50.6%) had significantly higher proportion of accident experience than other age groups (over 40s: 36.2%) and high delivery experience (more than 2 years: 36.4%). In addition, side job riders (61.5%) showed significantly higher proportion of accident experience than main job riders (39.1%). The riders with accident experience had more number of deliveries per hour (weekday: 3.56, weekend: 3.91) than the riders without accident experience (weekday: 3.29, weekend: 3.68). Lastly, the riders with accident experience rated significantly higher perceived level of risk on weather, violation of traffic laws, uninspected motorcycle, receiving calls while driving, missing safety training, missing personal protective equipment than the riders without accident experience. This study suggested four aspects based on the study results to prevent traffic accidents for delivery riders.

2016년 3월 6.67톤 어선이 크레인 작업을 하던 중 복원성 상실로 인한 전복 사고가 발생하였다. 전복은 충돌, 접촉, 좌초, 화재 및 폭발의 결과로 발생한 사고는 제외하고 선박이 뒤집힌 것을 말한다. 지난 9년동안(2010-2018), 전복 사고는 전체 해양사고의 2.34%를 차 지하고 있으며 증가와 감소를 반복하고 있다. 10톤 미만 소형어선의 주된 전복사고 원인은 부적절한 선적에 따른 복원성 상실이다. 어선 법에 따르면 소형 어선은 복원성과 1톤 미만 제한 하중 크레인에 대해서 복원성과 예비검사를 면제해 주고 있다. 본 연구는 고성에서 발 생한 소형 어선의 전복 사고 재결서의 원인으로 언급된 사항 중 크레인 증량에 따른 복원 모멘트 감소에 대해 실제 제원이 비슷한 어선 을 모델링하여 이를 통해 사고 전·후의 어선 상태를 가상하여 복원성을 비교하였다. 그 결과 기존 보다 무거운 크레인으로의 교체 시에는 복원 모멘트 감소와 현단몰입각의 감소로 전복의 위험성이 증가되었다. 표준재화 상태에서는 입·출항시 보다는 어로 활동을 하고 있는 상황에서의 복원 모멘트가 감소되는 것을 확인하였다.

This research carried out a study on the job characteristics of the skipper of the coastal composite fishing vessels in order to find a way to prevent the ship collision caused by the highest human error among the marine casualty of fishing boats. Video observation was used as the research method in which six CCD cameras were installed on the vessel to collect image data and data extracted from the image were analyzed to derive the results of the functional activity of skipper according to the fishing operation process of experimental fishing vessel. The results are as follows. The working process of the experimental fishing vessel consisted of navigation for fishing ground, setting line, waiting for hauling line, hauling line and navigation to homeport. In these processes, the skipper was performing watchkeeping in the wheelhouse in which he carried out a single task, a dual task that performed two tasks simultaneously, and a triple task that performed two or more tasks simultaneously. In addition, one of the risk factors causing the collision was a no watchkeeping in the wheelhouse for navigating for fishing ground, waiting for hauling line, and hauling line at 25.4%, 64.6% and 0.3%, respectively among the marine casualty while drowsiness caused 1.2% of the marine casualty in navigating for fishing ground. Concurrent tasks that simultaneously perform two or more tasks that can overlook any other important duties while carrying out watchkeeping in the wheelhouse include 51.3% of navigation for fishing ground, 81.9% of setting line, 19.0% of waiting for hauling line, 87.9% of hauling, and 88.7% of navigation to homeport. The above concurrent tasks yielded an average of 66.1%. Experimental fishing vessels are required to focus on ship handling operations related to fishery operations, and the skipper is assigned more activities and attention to fishery related tasks. Therefore, it is considered desirable to build a collision prevention system that is appropriate to the characteristics of the skipper’s work, escaping from transferring the responsibility of ship collision to the skipper completely.

The past five years, industrial accidents due to food processing machinery have been occurred 725 cases, injury by the food cutter occurred 390 cases in its. On this study, to prevent food cutter injury, an attempt is made to present the improved documentation of fundamental safety of the food cutter workplace through the injury analysis of food cutter injury and surveys on band saw machine business field. Analyzing the result of 390 cases on food cutter injury, amputation, cut, puncture occupied 75.1 percent (293 cases), compressed occupied 23.3% (91 cases), also it showed constant component without reference to gender, age, scale of work place, service period. In the survey, lack of concentration for workers have been pointed out as the biggest factor in the cause of band saw machine injury. Meanwhile, such as the EU and Japan, whereas presents safety standards about band saw machines that are tailored to each country, on the other hand, South Korea doesn't provide the standards. To prevent the food cutter injury, safety standards need to be established in consideration of amputation, cut, puncture, compressed injury and financial support is required to procure protective equipment at each place of business.

PURPOSES: This study deals with the traffic accidents classified by the traffic analysis zone. The purpose is to develop the accident density models by using zonal traffic and socioeconomic data. METHODS : The traffic accident density models are developed through multiple linear regression analysis. In this study, three multiple linear models were developed. The dependent variable was traffic accident density, which is a measure of the relative distribution of traffic accidents. The independent variables were various traffic and socioeconomic variables. CONCLUSIONS : Three traffic accident density models were developed, and all models were statistically significant. Road length, trip production volume, intersections, van ratio, and number of vehicles per person in the transportation-based model were analyzed to be positive to the accident. Residential and commercial area ratio and transportation vulnerability ratio obtained using the socioeconomic-based model were found to affect the accident. The major arterial road ratio, trip production volume, intersection, van ratio, commercial ratio, and number of companies in the integrated model were also found to be related to the accident.

본 연구는 평면선형과 종단선형이 겹친 복합선형 구간에서 복합선형요소와 교통사고와의 특성을 파악하기 위한 목적으로 진행되었다. 이를 위해 설계속도 및 제한속도가 100km/h인 4차로 고속도로 중 평면곡선부를 대상으로 연구를 진행하였다. 기하구조자료는 한국도로공사 "지리도형정보시스템" 자료를 이용하였고 교통사고자료는 "고속도로 교통사고 통계' 자료를 활용하였다. 분석결과, 종단곡선이 없는 경우가 종단곡선이 있는 경우보다 사고율이 높게 나타났으며, 종단곡선이 1개인 경우가 종단곡선이 2개 이상인 경우보다 사고율이 높게 나타났다. 종단곡선이 1개인 경우, 오목종단곡선(SAG) 구간이 볼록종단곡선(CREST) 구간보다 사고율이 높게 나타났으며, 평면곡선부 이전 선형이 직선부인 경우가 곡선부인 경우보다 사고율이 높게 나타났다. 특히 노면상태가 습기(강우)일 때에는 평면곡선내 오목종단곡선인 경우이거나 평면곡선방향이 좌향구간의 경우 교통사고와 관련성이 높음을 확인하였다. 본 연구에서는 도로의 안전성을 높이기 위해 3차원적인 복합선형 조건을 고려한 도로 선형 설계의 중요성을 제시하였다는 점에서 의미가 있을 것이다.

본 연구는 청주시 4지 신호교차로의 측면접촉사고를 다루고 있다. 연구의 목적은 측면접촉사고의 특성을 분석하고 관련모형을 개발하는데 있다. 이를 위해 이 연구에서는 적절한 모형의 방법론을 찾는데 중점을 두고 있다.주요 결과는 다음과 같다. 첫째, 측면접촉사고에서 부상사고는 물피사고의 약 2배 이상으로 교차로 내에서 사고가 가장 많이 일어나는 것으로 평가되었다. 아울러 측면접촉사고는 대부분 승용차 관련 사고이며, 안전운행 불이행으로 인한 것으로 분석되었다. 둘째, 다중선형회귀모형이 다중비선형회귀모형보다 통계적으로 유의한 것으로 평가되었다. 또한 최적 모형은 종속변수가 사고건수인 모형으로 분석되었다. 본 연구에서 분석된 측면접촉사고의 요인은 교통량(ADT), 교차로 면적, 우회전 전용차로, 횡단보도 수, 주도로 제한속도, 최대종단경사 및 현시 수이다.

Accident analyses are used to identify common factors contributing to occupational accidents and to give recommendations for accident prevention. This study concerns with the accident characteristics and prevention in the telecommunication service industry. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. Three hundred and forty-five injury accidents which results in more than 4 days absence were surveyed. These data were used to investigate the accident characteristics in terms of company size, injured person's age, work experience, accident time, activity at time of accident, accident type, injured body part, and accident agency. We propose the accident prevention policy based on the accident characteristics. These results can be used to develop more effective occupational safety management policies in the telecommunication service industries.

This study concerns with the accident characteristics and prevention in small manufacturing industries of chemical products. To investigate the accident characteristics, we used workers' compensation reports and employers' accident analysis reports. One hundred and seven injury accidents which results in more than 4 days absence were surveyed from the manufacturing companies with under 100 employees. These data were used to investigate the accident characteristics in terms of company size, injured person's age, work experience, accident time, activity at time of accident, accident type, injury type, injured body Part, and accident agency We propose the accident prevention policy based on the accident characteristics. These results can be used to develop more effective occupational safety management policies in small manufacturing industries of chemical products.

For the accident prevention, it is necessary to identify common factors and characteristics contributing to the industrial accidents. This study concerned with the accident characteristics by age of injured person in the manufacturing industries. To make the statistical comparisons for the accident characteristics by age group, we derived the distributions of occupational injuries in terms of accident time, accident type, activity at time of accident, injury type, injured part of body, agency of accident, and workday losses. The results show that the characteristics of the occupational injuries by age group are not significantly different in a31 characteristics investigated in this study.

연구는 1997년부터 2003년까지 우리나라 전국에서 발생한 스쿠버 잠수 사고 자료를 수집 및 분석하고 일본 및 미국에서 발생한 잠수 사고와 비교 분석하여 우리나라 스쿠버 잠수 사고의 특성을 밝혀내었다. 연구 결과는 잠수 사고 예방에 큰 기여를 할 수 있을 것으로 기대된다. 사고 자료는 대한수중협회의 기술위원회에 보고된 자료와 해양경찰청의 자료, 스쿠버 잠수 전문점에 전화 통화 및 방문 조사를 실시하여 얻은 정보, DAN(Diver Alert Network)에서 발행한 잠수 사고 보고 자료집, 월간 잡지에 수록된 잠수 사고 보고 자료, 그리고 세미나 발표 자료 등을 참조하였다. 자료 분석은 사망 사고에 국한하였으며 분석 결과 우리나라의 사망률이 일본의 2.8배, 미국의 2.2배 수준인 것으로 나타났다.