The safety accident has been repeatedly abolished and resurrected according to the social atmosphere and the issue of the effectiveness of education has been constantly raised. As shown in [Figure 1], the training of the manager, During the ten years of revival due to the amendment of the law in 2007, the accident rate further increased. Industrial accidents often occur in combination with unsafe behavior and unsafe conditions. Unsafe behaviors are indispensable factors in the work that human beings engage in. In order to prevent accidents, it is imperative to establish systems and measures to understand the more obvious causes.

Occupational Safety and Health Expenses Law in construction industry was enacted in 1988 by the notification of Ministry of Employment and Labor and 22 revisions have been made since. The fact that revisions have been made almost every year since the first enactment shows that Occupational Safety and Health Expenses can effectively prevent construction accidents and the need for revisions to fit the reality has been raised continuously. Despite the construction industry has undergone various internal and external environmental changes, (such as the changes in the safety and health management techniques and the increase in the construction employees’ desire for safety) the appropriation standard of Occupational Safety and Health Expenses has been calculated based on the contract price. The construction industry has constantly suggested that the Occupational Safety and Health Expenses be calculated based on the estimated construction expenses since applying the current method doesn’t provide enough money to secure the safety. Also because it has become mandatory to hire a health manager since 2015, the lack of Occupational Safety and Health Expenses is expected to get worse. In this study, we will analyze the usage of Occupational Safety and Health Expenses and propose a more practical and realistic change in setting the appropriation standard of Occupational Safety and Health Expenses.

The VHTR (Very High Temperature gas-cooled nuclear Reactor) has been considered as a major heat source and the most safe generation IV type reactor for mass hydrogen production to prepare for the hydrogen economy era. The VHTR satisfies goals for the GIF (Generation IV International Forum) policy such as sustainablility, economics, reliability and proliferation resistance and physical protection, and safety. As a part of a VHTR economic analysis, we have studied the VHTR construction cost and operation and maintenance cost. However, it is somewhat difficult to expect the ripple effect on the whole industry due to the lack of information about Inter-industries relationship. In many case, the ripple effect are based on experts’ knowledge or uncertain qualitative assumptions. As a result, we propose quantitative analysis techniques for ripple effects such as the production inducement effect, added value inducement effect, and employment inducement effect for VHTR 600MWt×4 modules construction and operation ripple effect based on NOAK (Nth Of A Kind). Because inducement effect values have been published annually, we predict inducement effect’s relation function and estimated values including production inducement effect value, added value inducement effect value, and employment inducement effect value using time series and estimated values are verified with published inducement effects’ value. This paper presents a new method for the ripple effect and preliminary ripple effect consequence using a time series analysis and inter-industry table. This ripple effect analysis techniques can be applied to effect expectation analysis as well as other type reactor’s ripple effect analysis including VHTR for process heat.

This study is a study for finding a solution to the current situation and identify problems such as discharge through a survey of special health and safety training in the construction industry. In particular by identifying the status and problems, such as special health and safety training in the construction industry it was carried out for the purpose of the measures taken.

Currently, the construction industry in Korea implements the risk assessment that is implemented by managers and working team leaders. However, it is difficult to share the result of risk assessment meeting to substructural workers in korea system and the workers don't understand meaning and effect about risk assessment. The risk assessment is that the workers in the construction site have to know risk factors and reducing ways to the risks. But, the education and sharing methods for risk assessment system is insufficient in korea. For this risk assessment problems identified were surveyed. In order to improve the problems of the risk assessment, proposes the following three methods. First, Implement to educate the risk assessment during the basic safety and health training of construction industry. Second, the training way about workers' participation in risk assessment is necessary. For example, after watching videos, etc, the workers create risk assessment in person and make a presentation about it. Third, the risk assessment utilize during TBM(Tool Box Meeting). Before working every day, we need to educate risk factors and the reducing ways to the risk during TBM.

Recently, the Ministry of Labour, published clause 2 of Article 41 (Risk Assessment) of the Act "Industrial Safety and Health" dated 12 June 2013 in connection with continuous increase of accidents at construction sites in order to prevent accidents in industrial safety and health in new construction in accordance with the risk assessment on construction projects are realized after March 13, 2014. In this paper, positive method of calculating risk discussed by performing research the awareness of general contractors and sub-contractors with presenting risky situation is considered. The purpose will be a positive method of calculating risk and would be a sufficient basе and give a positive direction in the development of new systems currently working in the construction and risk assessment which consider the characteristics of sufficient risk assessment system for future research.

The risk assessment carried out on the construction site at the beginning of the implementation depends on the subjective judgment of risk of general contractor and subcontractors, whose opinion about frequency and intensity of risk is different. In this paper, research the awareness of general contractors and subcontractors about process of risk assessment at the construction site and its effectiveness. Researching of the main factors "frequency", "intensity" which determines the degree of risk gives the opportunity to find an option for improving the effective implementation of risk assessment.

The Purpose of this study is to compare occupational accident rate of unionized and non-unionized company and to investigate influences of labor relations on occupational accident rate in Korean manufacturing and construction Industry. Data in 2011 Occupational safety and Health Trend Survey were analyzed for this study. Results show that the occupational accident rate was lower in unionized company than non-unionized company. And amicable labor relationship reduces the occupational accident rate. The policy should be needed to support labor union and improve labor relationship to prevent industrial accidents.

The purpose of this study is to investigate the problem on safety and health training system in Occupational Safety and Health Act(OSHA) and to find countermeasures to improve it in the construction industry. The questionary survey was done on aiming at tracing the legal drawbacks of safety and health training system. The questionary was prepared to target on site workers, management supervisors, and safety supervisors in various construction sites. After analyzing the answers from the survey, realistic and optimal countermeasures on derived problems were proposed. These should be included on the next revision of OSHA.

In this paper, we survey and analyze the characteristics of the special health and safety education in the construction industry, and provides a few solutions. In particular, the implementation of special safety and health education conducted a study to target the construction site of heavy chemical plant many domestic. If you look at the results of research and analysis, problems of special health and safety education that are currently being conducted in many cases, the proportion of respondents who do not know the special safety and health education is very high, workers of the scene, this education it is possible to know that the proportion of respondents answered to have the experience that are submitted to the work while not subject to are operated poorly in the field of special health and safety education high. Finally, improve the quality of the most important education has to be done on a priority basis that fixing the safety education system systematically in line with the actual situation in the field and the use of specialized external agency.

According to Department of labor guideline “2012-104 (2012.9.26.)” This study is to suggest the basic information and the improvement for the application of risk assessment on a construction site by group interview & survey of construction worker who is the practice of the subject and then numerical analysis about awareness and action plan of Safety and health. The result of group interview and survey of construction worker, most of construction worker feel the danger during the work. Then construction worker analysis results that risk assessment helps to change & raise awareness of safety and reduce an industrial disaster. Easy Safety management activity such as TBM & safety education active will be necessary for safe worksite and then I suggest the TBT(tool box talk) active which combines TBM & safety education.

Incheon Port has many advantages for import of log and timber for furniture. More than 50% of lumber which was imported is through Incheon Port. However, most companies move and set up their business by taking lease of workshop. Because of expensive cost of transportation, it is suggested to construct a lumber Industrial district in the North Port in Incheon. By researching the national plans about the North Port and Incheon Ports, an adequate acquaintance of lumber industry in Incheon has been realized. ills study conducted the economic effect analysis for lumber industry clustering and the necessity of cluster composition is derived. Then effectiveness analysis for lumber industry cluster composition is sequentially operated.

The Purpose of this study was to comprehend the influence that worker's job stress caused by the distinct characteristics of construction work affect on construction management. Proven through previous studies of job stress measurement method, physical environment, job demands, job autonomy, interpersonal conflict are derived as typical factors. We analyzed causal relationships between the factors using structural equation modeling under the hypothesis that job stress have effect on the construction management. As a result, successful job stress management for construction management plan is proposed.

건설업은 공사수행을 포함한 대부분의 기업 활동이 인력에 대한 의존도가 높은 산업으로서 원가구성 측면에서도 외주비와 재료비를 제외하고 가장 큰 원가항목이 인건비다. 따라서, 건설업의 인력관리 강화는 효율적인 인력 운용과 원가관리를 위해서도 가장 중요한 관리항목이다. 본 연구에서는 건설업에서 체계적인 인력 및 시간관리를 통해 인력운용의 효율을 높일 수 있고, 업무시간 실적 정보에 의해 업무에 대한 성과관리의 정확성을 높일 수 있는 제도운영 및 시간관리 시스템 (TMS: Time Management System) 구축 방안을 소개하였다. 이러한 시간관리는 높은 수준의 인력 및 업무 관리를 가능하게 하고 업무에 대한 우선순위 결정과 적정 시간 분석으로 관습적이고 비효율적인 업무요소를 파악하여 효율적인 인적자원 관리를 하고자하는 건설사뿐만 아니라 프로젝트 산업 군에 속하는 여러 기업들에게 도움을 줄 것으로 기대한다.

The purpose of this paper is to give information on e-CPC implementation in the manufacturing industry by studying and analyzing a small and medium sized manufacturing company. After analyzing Various factors on J’s e-CPC implementation such as environmen

Safety climate in the research area of industrial safety begins to be influential meta-theory. With this research trend, this paper is to examine the relationship between safety climate and safety participation, and the moderating effect of age. Data were gathered from 292 manufacturing workers in construction industry. It is found that management involvement, safety education, and precaution activities have affirmative effect on safety participation, and physical job load negative effect on it. Next, education, precaution activities, and safety system were found to have interactional effects on safety participation with age.

Safety management cost, US one thousand billion has been input to the construction area from 1995 to 2000 but the management quality is still in the developing country level. The above mentioned increase of accident rate are attributed to the generous code regulation, net fit to the sense, varying with time change, but the more fundamental reason of this is no practical construction safety management system, up to now. Hardware-orienting operation for the system could be a main reason of this problem. In this paper, we developed a model for efficient construction safety system. It was found from the case study that the A Study on Introduction Application of Occupational Health & Safety Management System for Construction Industry.

Domestic construction industry (including plant engineering industry) faces severe competition with world-wide leading companies under WTO (World Trade Organization) system. To survive in this competition, domestic construction company should establish and operate standardization system efficiently. In this paper, check list is presented to prepare the efficient reliability management system in domestic construction. And then, the check list is applied in MIR(Maturity Index on Reliability) estimation item to estimate reliability management level of company quantitatively.