검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 8

        1.
        2020.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study is to identify economic situation on scale of tuna distant longline fishery by analyzing its economies of scale using the cost function. To analyze its economics of scale, the deep-sea fishing statistics were used from 2012 to 2016. In detail, the number of panels for estimating the cost function was 68 tuna distant longline vessels from 2012 to 2016, and the total number of observations over the five years were 340. As a final model, the two-way fixed effect model based on the translog cost function was adopted through the F test, the Breusch-Pagan test and the Hausman test. As a result of the analysis, it was found that tuna distant longline fishery between 2012 and 2014 was diseconomies of scale, the fishery between 2015 and 2016 was economies of scale. However, the economic indicators of the scale from 2012 to 2016 were almost close to zero, indicating that the constant returns to scale, the optimal scale, were reached. Therefore, in the situation where the amount of fishery resources in the world continues to decrease, it is necessary to prepare a method to obtain economic benefits through scale maintenance and reduction rather than indiscriminate scale expansion.
        4,800원
        2.
        2019.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        충돌 피항 동작은 선박 간 끊임없이 영향을 주고받는다. 특히 다수의 선박이 조우하는 경우, 상대 선박의 피항 의도를 파악하고 서로에게 얼마나 영향을 미치는 지를 파악하는 것은 어려운 일이다. 이를 위해 분산 확률 탐색 알고리즘이 제안되었다. 분산 확률 탐색 알고리즘은 이웃 선박과 반복적인 메시지 교환을 통해 비용을 가장 크게 낮출 수 있는 코스를 탐색 후 확률과 제한 조건에 따라 기존의 코스를 유지할지 아니면 새로운 코스를 선택할지를 결정한다. 그러나 분산 확률 탐색 알고리즘에 사용된 파라미터가 충돌 피항에 어떠한 영향을 미치는지 증명되지 않았다. 본 논문에서는 분산 확률 탐색 알고리즘의 파라미터와 가중치가 충돌 피항에 어떠한 영향을 미치는지 분석하였다. 또한 타선과의 피항 거리를 조절하기 위한 충격 흡수 영역을 소개한다. 실험 방법은 두 선박이 조우할 수 있는 세 가지 상황, 즉 정면에서 조우하는 상황, 횡단하는 상황, 추월하는 상황에 파라미터와 가중치의 변수들을 조합하여 실험을 진행하였다. 각 상황 당 8,000회, 총 24,000회의 실험이 진행되었다. 실험 결과 모든 실험에서 한 건의 충돌도 발생하지 않았다. 선박이 목적지에 큰 가중치를 줄 경우, 즉 이기적인 행동을 할 경우, 비용은 증가함을 보였다. 타선의 움직임을 더 길게 예측할수록 항행 거리, 메시지 교환 횟수는 작아지는 경향을 보였다.
        4,200원
        3.
        2016.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: This study aimed to evaluate the performance of pavement management works and to develop a function for estimating the level of service (LOS) and cost of service (COS) for the systematic and quantitative management of pavement performance in the public sector. METHODS: The International Roughness Index (IRI) was used as the performance index for pavement management. Long-term pavement performance data for a period of 7 years (2007-2014) collected by the National Highway Pavement Management System and historical maintenance budget data published by the South Korean government were used to develop the LOS-COS function. Based on the function, a model for estimating the appropriate budget as well as the network conditions was suggested. RESULTS : There was high degree of correlation between pavement performance and the investment level (R = - 0.74). The developed LOS-COS function suggested that the unit cost to improve the network IRI to 1 m/km was 32.6 billion KRW. Further, the maintenance costs normalized with respect to the LOS levels were LOS-A = 88.2 billion KRW, LOS-B = 55.6 billion KRW, and LOS-C = 23.0 billion KRW. CONCLUSIONS: This study proposes a simple way of developing a LOS-COS function. It also shows how to develop a network budget demand and condition estimation model using the LOS-COS function. In addition, it is the first attempt to evaluate the road maintenance budget in South Korea. It is expected that these results will help in the negotiations between the road managers and budget makers.
        4,000원
        4.
        2010.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Now days, the marketing environment is rapidly changed. Therefore, a lot of companies try to reduce production cost. Especially, Design is a important activities in new product development. While the concepts of design for manufacturable and concurrent engineering have made significant advances in integrating the design function with other areas in the firm. There are still major gaps in timely and accurate costing information available to designers. Inappropriate design could result in high redesign cost and delay in product relation. The generation of design and improvement is a time-consuming and mentally exhaustion process. It involves combining design features to generate as many potential design as possible. As not all features combinations are feasible, decision-makers have to narrow down the potential solutions and subsequently select appropriate design for further development. This new study is composed of 3 steps aiming at the Low Cost Design of the product. The three steps are consisted that setting up the target Cost, estimating the current functional cost, the design of a unit's reviewing according to the priority of the difference between the target cost and the functional cost.
        4,000원
        5.
        2007.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        일반적으로 도로정책평가 시, 이상적인 도로 교통조건에서 수집한 교통류 자료에 근거하여 BPR식 형태로 개발한 통행비용함수식을 일반화하여 적용한다. 하지만, BPR 형태로 개발된 모형은 장래교통량예측이나 통행행태분석에 있어서 적용이 도로 교통환경을 묘사하는데 적합하지 않은 것으로 보고되고 있다.(Spiess, 1989 ; Singh, 1999) 따라서 본 연구는 이러한 문제점을 해결하기 위해, 분석대상지의 도로 교통조건에 적합하도록 미시적 교통류시뮬레이터기반(Micro traffic Simulator Based : MSB)으로 생성된 자료로 통행비용함수를 개발, 검증하는 분석방법론을 제시하였으며, 주요 연구결과는 다음과 같다. 첫째, 이상적인 도로교통조건 이외의 상황에 대한 도로교통정책 평가에 적용이 용이하도록, 단시간에 다량의 교통류 자료생성이 가능한 미시적 교통류시뮬레이터(VISSIM)를 이용하여 분석대상지에 적합한 통행비용함수를 개발하는 방법론을 제시하였다. 둘째, VISSIM을 이용하여 생성한 분석자료를 기반으로 하여 BPR 함수식과 MSB 함수식을 각각 개발하고, 통계값 및 산포도를 이용한 모형들의 비교분석을 통하여 MSB 함수식의 활용가능성을 검증하였다.
        4,000원
        6.
        2005.05 구독 인증기관 무료, 개인회원 유료
        Translating the "Voice of Customer" into business process is critical for developing products, services, and marketing programs that satisfy customers. Quality Function Deployment(QFD) is a technique which was born in Japan as a strategy for assuring that quality is built into new products. QFD was first used in 1972 by Kobe Shipyard of Mitsubish Heavy Industrials Ltd and was then referred to as the quality tables. After QFD is proposed, it has been applied by both many large and small companies around the world. Many studies related QFD are performed till now but study related "cost-based QFD(QFCD)" hasn't been performed actively. If cost-based QFD is not performed, the produced results will be included possibility that is not significant as well as realistic. Therefore, the purpose of this study is to improve effectiveness and efficiency for product development's result through QFD by introducing QFCD's concept, performance procedure and developed QFCD Software.
        4,000원
        7.
        2002.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        This paper presents an analytic method of quality function deployment(QFD) that is to maximize customer satisfaction subject to technical and economic sides in process design. We have used Wasserman's normalization method and the analytical hierarchy process(AHP) to determine the intensity of the relationship between customer requirements and process design attributes. This paper also shows cost-quality model the tradeoff between quality and cost as a linear programming(LP) with new constraints that have designated special process required allocating firstly. The cost-quality function deployment of piston ring is presented to illustrate the feasibility of such techniques.
        4,000원
        8.
        2002.05 구독 인증기관 무료, 개인회원 유료
        This paper presents an analytic method of quality function deployment(QFD) that is to maximize customer satisfaction subject to technical and economic sides in process design. We have used Wasserman's normalization method and the analytical hierarchy process(AHP) to determine the intensity of the relationship between customer requirements and process design attributes. This paper also shows cost-quality model the tradeoff between quality and cost as a linear programming(LP) with new constraints that have designated special process required allocating firstly The cost-quality function deployment of piston ring is presented to illustrate the feasibility of such techniques.
        3,000원