목적 : 최근 전자기기의 발달로 인해 근거리 작업이 증가하고 있으며, 이로 인해 안 건강에 대한 우려가 증가함 에 따라 청광 차단에 대한 관심이 증가하고 있다. 방법 : 유해 광선 차단이 가능한 기능성 콘택트렌즈 소재 개발을 위해 reactive yellow 86을 안료 중합체에, 그리고 propyl gallate를 실리콘 하이드로겔 소재에 첨가제로 각각 사용하여 안 의료용 소프트 콘택트렌즈 제조에 적용하였다. 결과 : propyl gallate의 첨가량에 따라 접촉각이 68.25~42.50˚로 측정되었으며, 습윤성이 향상되는 것으로 나타났다. 또한, 제조된 컬러 소프트 콘택트렌즈는 산소투과성 및 습윤성이 우수함과 동시에 자외선 및 청광 차단 효과를 나타내었다. 결론 : reactive yellow 86 및 propyl gallate가 적용된 컬러 콘택트렌즈의 재료의 경우, 기본적인 안 의료용 하이드로젤 렌즈의 물성을 만족시킴과 동시에 우수한 자외선 및 청광차단 효과를 가지는 것으로 판단된다.

The charge transfer (CT) excitation energy calculations of H2N-(CH=CH)3-X and the H2N-H.....H-X structures with the various electron acceptors (-X) were performed with comparing the accuracy of various calculation methods, such as B3LYP, long-range corrected (LC)-BLYP, and EOM-CCSD. Both intra-molecular and inter-molecular systems showed a tendency for CT excitation energy to decrease as the electronic accepting property increases, and LC-BLYP showed the best accuracy in both inter- and intra-molecular CT excitation energy. In this study, it was confirmed that unexpectedly larger range separation parameter(μ) values of LC-BLYP showed better results of CT excitation energy.

To prepare activated carbon with a high specific surface area, oxygen functional groups (OFGs) that can serve as useful electron donors during KOH activation were treated with nitric acid and incorporated into activated carbon. OFGs are incorporated differently according to the surface characteristics of starting materials. Up to 22.46% OFGs are incorporated into wood-based activated carbons (WACs), the C=O, COOH contents was 1.90, 17.05%, respectively. Whereas up to 12.82% OFGs are incorporated into coconut shell-based activated carbons, the C=O, COOH contents was 4.12, 6.15%, respectively. The OFGs used for increasing the specific surface area are the carbonyl group, and as the content of the functional group increases, the carbonyl group spreads to the carboxyl group. The specific surface area of activated carbons increased by 10–68% with an increase in the carbonyl group up to 6% (maximum point of carbonyl group). On the other hand, the specific surface area for WACs increased when the carboxyl group was 10% or below, but decreased by 6–15% when it increased to 10% or excess.

Chitin deacetylases (CDAs) are extracellular-modifying enzymes that deacetylate chitin to produce chitosan. In insects, this modification may contribute to the affinity and/or cross-linking of chitin/chitosan-like polysaccharides for a variety of structural proteins, which may lead to diverse mechanical properties of the cuticle. We previously reported the functional importance of Group I CDAs, TcCDA1 and TcCDA2, as well as the two alternative spliced isoforms of the latter, TcCDA2a and TcCDA2b from the red flour beetle, Tribolium castaneum in molting, morphology of cuticle and movement of legs. In this study, we further analyzed protein localization, ultrastructural defects of the cuticles and leg joints after RNAi of those genes. Both proteins are mainly present in the innermost procuticle region called the “assembly zone”. Loss of function of either TcCDA1 or TcCDA2 caused disorganized chitinous horizontal laminae and vertical pore canals in both the rigid and soft cuticles. RNAi of TcCDA2b affects cuticle integrity similar to that seen in RNAi of the two alternatively spliced forms of TcCDA2. In contrast, TcCDA2a-deficient adult, like that seen in the hypomorphic phenotype produced by RNAi of TcCDA1, exhibited ruptured tendons between femur and tibia, resulting in loss of locomotion ability. These results suggest that Group I CDAs play critical roles in molting, morphology, ultrastructure and mobility in T. castaneum. This work was supported by NRFs (NRF-2015R1A6A3A04060323 and NRF-2018R1A2B6005106).

The present study was conducted from August to December 2016 in a cylindrical water tank with a diameter of 1 m, a height of 4 m and a capacity of 3,000 L. The field water and sediment from the Nakdong River were also sampled for the experimental culture (field water+sediment) and control culture (field water), respectively. In this study, we aimed to investigate phytoplankton succession pattern using the phytoplankton functional group in the enclosed culture system. A total of 50 species in 27 genera including Chlorophyceae (30 species), Bacillariophyceae (11 species), Cyanophyceae (7 species), and Cryptophyceae (2 species) were identified in the experimental and control culture systems. A total of 19 phytoplankton functional groups (PFGs) were identified, and these groups include B, C, D, F, G, H1, J, K, Lo, M, MP, N, P, S1, TB, W0, X1, X2 and Y. In particular, W0, J and M groups exhibited the marked succession in the experimental culture system with higher biovolumes compared to those of the control culture system, which may be related to the internal cycling of nutrients by sediment in the experimental culture system. The principal component analyses demonstrated that succession patterns in PFG were associated with the main environmental factors such as nutrients (N, P), water temperature and light intensity in two culture systems. In conclusion, the present study showed the potential applicability of the functional group for understanding the adaptation strategies and ecological traits of the phytoplankton succession in the water bodies of Korea.

최근, 전세계적으로 물 부족 현상과 지역개발 및 산업 고도화, 인구증가와 함께 물 수요는 증가하고 있다. 이를 해결하기 위한 방법으로 해수담수화 방법이 있다. 해수 담수화의 많은 방법 중 이온 교환막을 이용한 실험을 진행하였다. 본 연구에서는 Anion exchange resin을 대체할 수 있는 물질로 Polystyrene Latex입자를 제조 하였다. 제조된 입자에 chloromethylation과 amination을 통해 –NH3+, -NR3+, -PR3+, -SR2+등의 관능기를 도입하였으며, 제조된 입자와 고분자를 합하여 하이브리드 막 제조를 하였다. 특성평가로는 SEM, TGA, DSC, FT-IR, IEC Value를 통한 측정을 진행하였다.

Chitin deacetylases (CDAs) are extracellular-modifying enzymes that deacetylate chitin to produce chitosan. Insect CDAs have been divided into five groups based on phylogenetic analysis. We previously reported the functional importance of group I CDAs, TcCDA1 and TcCDA2, from Tribolium castaneum in molting, morphology of cuticle as well as in movement of legs. However, ultrastructure in the cuticle after RNAi for these genes have not been investigated. In this study, we further analyzed precise localization of these proteins and ultrastructural changes/defects of the cuticles in TcCDA1- and TcCDA2-deficient insects. Loss of function of TcCDA1 and TcCDA2 causes disorganized horizontal laminae and vertical pore canals in both rigid (e.g. elytron and ventral body wall) and soft (e.g. hindwing and dorsal body wall) adult cuticles. These results indicate that TcCDA1 and TcCDA2 are critical for development and formation of the beetle cuticles

Activated carbon fiber (ACF) surfaces are modified using an electron beam under different aqueous solutions to improve the NO gas sensitivity of a gas sensor based on ACFs. The oxygen functional group on the ACF surface is changed, resulting in an increase of the number of non-carbonyl (-C-O-C-) groups from 32.5% for pristine ACFs to 39.53% and 41.75% for ACFs treated with hydrogen peroxide and potassium hydroxide solutions, respectively. We discover that the NO gas sensitivity of the gas sensor fabricated using the modified ACFs as an electrode material is increased, although the specific surface area of the ACFs is decreased because of the recovery of their crystal structure. This is attributed to the static electric interaction between NO gas and the non-carbonyl groups introduced onto the ACF surfaces.

In the present study, we analyzed ecological functional groups of diverse hymenopteran families from five different vegetation stands in the Gwangneung forest. Hymenopterans were collected using three different traps from March to October 2015. Pollinators were a dominant group from March to May and declined significantly after that period. Parasitic group made major peaks from April to May and made another small peak in August. Predatory group reached to a peak in April and July respectively but appeared to be active even in October when all the other groups mostly disappeared. The vegetative communities were ordinated with the hymenopteran family assemblages using the Nonmetric multidimensional scaling (NMDS). The result of NMDS analysis showed that the community structure of the hymenopteran functional groups from the Quercus rubra stand is different from those of the other stands.

고분자 분리막 시스템은 우수한 가공성, 재료의 다양성 등의 장점으로 인해 연구가 활발히 진행되고 있다. 고분자 분리막 시스템이 타 공정과의 경쟁력을 가지기 위해서는 높은 투과성과 선택성, 화학적 내구성 등의 특징이 요구된다. 그러나 일반적으로 고분자 분리막은 특정기체에 대한 선택성이 향상되면 투과 성이 저하되는 trade-off관계를 가지고 있다. 투과도는 분리막 제조 시 다양한 공정조건과 제조 기술의 발전으로 한계를 나타내고 있다. 최근 들어 고분자 소 재에 관능기를 도입하여 기체의 용해성을 증가 시키거나 free volume을 증가시 켜 확산도를 증가시키는 연구가 진행되고 있다. 본 연구에서는 브롬, N3가 치환 된 폴리술폰을 제조하였으며, 이를 이용하여 고분자 분리막을 제조하였다 제조 된 분리막은 DSC, TGA 등을 이용하여 열적 특성을 파악할 수 있었다. Time-lag 장비를 이용하여 기체분리 특성을 확인 하였다.

Chitin deacetylases (CDAs) are chitin-modifying enzymes that deacetylate chitin to form chitosan. In insects, this modification may contribute to the affinity and/or cross-linking of chitin/chitosan-like polysaccharides for a variety of structural proteins that may lead to diverse mechanical properties of the cuticle. DmCDA1 (serpentine) and DmCDA2 (vermiform) from Drosophila melanogaster play roles in development and morphology of embryonic tracheal tubes. We previously reported the functional importance of TcCDA1 and TcCDA2 orthologs to DmCDA1 and DmCDA2 from Tribolium castaneum, in molting, morphology of cuticle, and movement of legs. In this study, we further analyze ultrastructural defects of the cuticles and leg joints in TcCDA1- and TcCDA2-deficient insects. Loss of function of TcCDA1 and TcCDA2 causes disorganized chitinous horizontal laminae and vertical pore canals of rigid adult cuticle (e.g. elytron). Both proteins are also required for laminal organization in soft cuticle (e.g. hindwing). Morphological analysis of TcCDA1- and TcCDA2A-deficient adult revealed that ruptured tendons between femur and tibia cause the defects in movement of the leg joint. This work was supported by NRF (NRF-2015R1A2A2A01006614).

건강기능식품 등 중 수용성 비타민 B군 (비타민 B1, 비타민 B2, 나이아신, 비타민 B6)의 동시분석 방법을 확립하기 위하여 본 연구를 실시하였다. HPLC에 의한 수용성 비타민 B군의 분석 방법은 기기분석조건을 확립하고, 국내외 시험법 및 논문을 참고하여 시험 데이터를 분석하였다. 수용성 비타민 B군의 HPLC 분석은 270 nm에서 Capcell Pak C18 UG 120 컬럼을 사용하여 진행되었다. 분석법 검증은 수용성 비타민 B군의 직선성, 정확성, 정량한계, 정밀성에 대해 수행되었다. 직선성은 비타민 B1, 비타민 B2,나이아신(nicotinic acid, nicotinamide), 비타민 B6 모두0.1~2 μm/mL의 농도범위에서 R2= 0.999 이상의 우수한 직선성을 확인할 수 있었다. 회수율을 검토한 결과, 비타민 B1 100~103%, 비타민 B2 104~112%, nicotinic acid 82~85%, nicotinamide 121~124%, 비타민 B6 95~104%의 양호한 회수율을 확인할 수 있었다. LOQ는 비타민 B1 0.04μm/mL, 비타민 B2 0.05 μm/mL, nicotinic acid 0.15 μm/ mL, nicotinamide 0.08 μm/mL, 비타민 B6 0.63 μm/mL 이었다. 정밀성을 검토한 결과, B1 0.4%, 비타민 B2 0.4%, nicotinic acid 0.5%, nicotinamide 0.7%, 비타민 B6 0.4% 로 1% 이내로 양호한 재현성을 확인할 수 있었다. 또한 동시 분석법의 정확성을 검증하기 위하여 어린이 기호식품 및 건강기능식품의 표시함량 모니터링을 수행한 결과, 모두 표시기준에 적합함을 확인할 수 있었다.

In this study, we investigated the C-V diagrams and metal surface related to the electrochemistry characterization of metal(nickel, SUS-304). We determined electrochemical measurement by using cyclic voltammetry with a three-electrode system. A measuring range was reduced from initial potential to -1350mV, continuously oxidized to 1650 mV and measured to the initial point. The scan rate were 50, 100, 150, 200 and 250 mV/s. As a result, the C-V characterization of metal using N,N-dimethylacetamide and N,N-dimethylformamide inhibitors appeared irreversible process caused by the oxidation current from the cyclic voltammogram. After adding organic corrosion inhibitors, adsorption film constituted, and the passive phenomena happened. According to the results by cyclic voltammetry method, it was revealed that the addition of inhibitors containing amide functional group enhances the corrosion resistance properties.

In the current study, MIL-101(Cr)-SO3H[HCl] as metal-organic frameworks (MOFs) was fabricated via a hydrothermal method. The physicochemical properties of the synthesized material were characterized using XRD, FT-IR, FE-SEM, TEM, and BET surface area analysis. The XRD diffraction pattern of the prepared MIL-101(Cr)-SO3H[HCl] was similar to previously reported patterns of MIL-101(Cr) type materials, indicating successful synthesis of MIL-101(Cr)-SO3H[HCl]. The FT-IR spectrum revealed the molecular structure and functional groups of the synthesized MIL-101(Cr)-SO3H[HCl]. FE-SEM and TEM images indicated the formation of rectangular parallelopiped structures in the prepared MIL-101(Cr)-SO3H[HCl]. Furthermore, the EDS spectrum showed that the synthesized material consisted of the elements of Cr, O, S, and C. The fabricated MIL-101(Cr)-SO3H[HCl] was then employed as an adsorbent for the removal of Sr2+ and Cs+ from aqueous solutions. The adsorption kinetics and adsorption isotherm models were studied in detail. The maximum adsorption capacities of MIL-101(Cr)-SO3H[HCl] for Sr2+ and Cs+ according to pH (3, 5.3∼5.8, 10) were 35.05, 43.35, and 79.72 mg/g and 78.58, 74.58, and 169.74 mg/g, respectively. These results demonstrate the potential of the synthesized MOFs, which can be effectively applied as an adsorbent for the removal of Sr2+ and Cs+ ions from aqueous solutions and other diverse applications.

This research investigated the feasibility of rice husk (RH) as a biosorbent for the removal of anions from aqueoussolution. RH-g-GMA-Am biosorbent, which possesses anionic exchangeable function, was prepared through graftpolymerization of glycidyl methacrylate (GMA) in the presence of N,N'-methylene-bis-acrylamide as a cross-linker usingpotassium peroxydisulphate as a redox initiator and subsequent amination reaction using ethylenediamine (EDA),diethylenetriamine (DETA), dimethylamine (DMA) and trimethylamine (TMA) as a amine source. Fourier transforminfrared (FTIR) and scanning electron microscopy (SEM) analysis as well as the sorption capacity for anions verifiedthe presence of grafted GMA polymers and amine groups on the RH surface. The zero point of surface potential ofaminated RH-g-GMA-Am sorbent was 6.4, which facilitated the sorption of anions on the positively charged sorbent atpH<6.4. The sorption capacity of RH-g-GMA-Am depending on the amination chemicals increased in the order:DETA≥EDA>DMA>TMA, i.e., primary amine>secondary amine>tertiary amine. The sorption selectivity of RH-g-GMA-Am sorbent aminated with DETA and EDA in the presence of equimolar anions and at pH 4.7 increased in theorder: SO4>PO4>NO3>F. Furthermore, their sorption capacities for PO4 were much higher than those of commercialanion-exchange resins. The results obtained suggest that the RH-g-GMA-Am biosorbent prepared by the GMA graftcopolymerization and subsequent amination can be used as an effective anion-exchanger comparable to commercial anion-exchange resins.

쇄설성 퇴적층 위주의 퇴적상을 갖는 것으로 알려진 영일 지역 장기층군의 함탄층 내에 실제로는 상당한 규모의 화산쇄설성 퇴적암류가 혼재된다. 전체적으로 이 함탄층은 화성쇄설성 암상과 단순 쇄설성 암상이 교호되는 양상을 보인다. 부석편을 함유하는 응회암과 응회질 사암이 함탄층의 특징적인 화산쇄설성 암상을 이룬다. 상 하부 함탄층의 화산쇄설성 암석에서 속성기원으로 산출되는 변질광물로는 몬모릴로나이트와 클리놉틸로라이트가 주된 광물상을 이루고 여기에 단백석과 석영이 수반된다. 광물조성과 양이온 치환능력 면에서 일부 층준에서는 응회질 암석들이 저품 위 제올라이트나 벤토나이트 광층을 이룬다. 또한 대부분 1 m 미만의 박층을 이루기 때문에 전형적인 제올라이트나 벤토나이트 자원으로서의 유용성과 잠재성은 낮은 것으로 판단된다. 그렇지만 인접하는 이들 광층들이 함께 개발될 수 있다면, 광물조성과 CEC 수치 면에서 산성백토와 같은 흡착기능성 광물자원으로서의 활용 가능성은 충분한 것으로 평가된다.