한반도의 Gutenberg-Richter b값에 관한 기존 국내 연구결과로부터 최적값을 전문가 패널을 통해 도출하였다. 전문가 패널에 의한 평가 결과, Gutenberg-Richter b값은 지진원 구역에 상관없이 한반도 전체에 걸쳐 비교적 일정하며 그의 평균값은 0.96으로 추천되었다. 지진지체구조는 4가지로 의견이 수렴되었다. 패널평가 결과를 신울진 1.2호기 원전부지에 적용하여 지진재해도에 미치는 영향을 분석하였다. 연구대상 부지의 평균재해도 수준은 전문가 패널평가결과 적용 이전에 비해 0.2g에서 최소 약 70-80% (0.6-0.7 order) 감소하였고, 지진재해도의 불확실성 폭은 0.2g (15%-85% 신뢰구간)에서 현저하게 감소하였다. 향후, 지진재해도분석 시 b값을 지진원 전체에 균일하게 보수적으로 0.95를 적용할 것을 제안하였다.

Steel and iron manufacture works exist that many latency risk as melting liquid of high temperature, work of high place, and so on. Once in a while, the accident case make use of basic data for latency risk analysis in a place of business. In this paper, we investigated the cause of the accident in steel an iron works. The result, we came across that many latency risk in steel and iron manufacture works. The main type of risk are fall, narrow, come flying, etc. Most of the latency risk type are repetition and conventional accident. Accordingly, steel and manufacture works must prevent to repetition and conventional accident.

The consumption of “ready-to-eat” agricultural products is recently increasing and the safety of these agricultural products is forefront of public concerns. The 120 samples of paprikas, strawberries and tomatoes, which are the representative exported agricultural products, were purchased at the department stores and discount stores in Daejeon. And we determined the microbiological and parasitological contamination level of these agricultural products using culture media, multiplex PCR, commercial bacterial detection kit and microscopy, and also evaluated the decontamination method. Mean counts of total aerobic bacteria from these agricultural products ranged from 1.3×104 CFU/g to 1.8×105 CFU/g, and mean counts of coliforms ranged from 1.4×103 CFU/g to 9.6×103 CFU/g. There was no significant difference in the level of bacterial contamination between the agricultural products from department stores and the ones from discount stores. Strawberry showed the highest contamination level for the bacteria and we also found the unidentified parasite eggs. Enterobacter cloacae was the most frequently isolated bacteria strain, but no food poisoning pathogenic bacteria except Staphylococcus aureus was isolated from the products by multiplex PCR. Compared to unwashed products, tab water-washed ones showed 80% decrease of the counts of total aerobic bacteria on the agricultural products, and the rates decreased more by incorporating detergent or ultrasonic wave treatment. We concluded that the biological contamination levels among paprikas, strawberries and tomatoes were the highest in strawberries, but there were not significant difference according to distribution systems.

Earthquake is one of the hazard so hard to provide because it is difficult predicted occurred time, scale and characters. Neighbors which have damaged by earthquake look out for statement of damage, It is bigger than nation which has not prepared seismic code at ordinary time seismic damage which belong to loss of life. The earthquake in Kobe, Japan showed that the damages were concentrated on the buildings which were not considered to be protected from the earthquakes. Seismic code applied structures was small damaged but non applied structures was much damaged such as collapse and loss of life. In this study, apartment structures in Korea analyze about earthquake hazard and evaluate seismic performance. Through the this study we have notice of earthquake hazard for apartment structures which live a lot of population of Korea and suppose necessary for seismic retrofit.

Since the school buildings are generally used as public shelters when the natural disasters such as flood and earthquake occur, it must be designed to show enough structural performance when subject to earthquake. Major failure mode of the school buildings observed in past earthquakes were shear failure of column of which length is shortened by infilled masonry blocks. ln this study, the seismic risk of the reinforced concrete school building structure was evaluated by using the seismic performance evaluation methods of low-story RC structures developed in Japan and the required seismic performance index which is obtained according to the KBC2008 seismic hazard map and soil types. ln this paper, the seismic performance of the school building is evaluated by considering this short-column effects, building shape and deterioration.

The power of semiconductor, Korea is continuously constructing semiconductor production line for keeping a front-runner status. however, studies and data about potential risks in semiconductor factory are still short. If fire does not initially suppressed, the fire causes a great damage. To decrease fire risk factors, in addition to fire fighting safety equipment, more important thing is how to design and construct fire protection system. The current fire protection codes about semiconductor factory come under functional law, and this law is short of consideration about particularity of factory. The existing prescriptive fire codes depending on experience compose without evident engineering verifications, thus equipments which is created by the current prescriptive fire code may bring about a variety of problems. For example, the design under the current regulation can not cope with the excessive investments, low efficiencies, and the diversifying construction designs and be applied to the quick changes of new technologies. Ergo, an optimal design for fire protection is to equip fire protection arrangements with condition and environment of production field. Manufacturing factory of semiconductors is a windowless airtight space. And for cleanliness, there exists strong flow of cooperation. Therefore, there is a need for fire safety design that meets the characteristic of a clean room. Accordingly, we are to derive smoke flow according to cooperation process within a clean room and construction plan of an optimal sensor system. In this study, in order to confirm the performance of proposed smoke-exhaust equipment and suggest efficient smoke exhaust device when there is a fire of 1MW of methane in the clean room of company H, we have implemented fire simulation using fluid dynamics computation.

산림유역 조건에 따른 붕괴 토사량을 측정하여 사면 붕괴가능성을 평가하고 붕괴위험 지역에 대한 예지기술(豫知技術)을 개발함으로서 산지사면에서 발생하는 각종 재해에 대한 피해를 최소화 할 수 있는 산림유역 관리에 대한 기술적 기초 자료를 제공하고자 연구하였다. 붕괴 위험지역을 평가한 결과 I급지(매우 위험지역)는 화성암지 역으로 침엽수림이며 임령은 20년생 이하, 토심은 30cm 이하, 토성은 사질식양토(SCL), 석력함량은 31~40%, 사면방위는 남~동(S~E)사면, 주하천길이는 2,501~3,500m, 총하천수는26~30개, 총하천길이는5,501~10,000m, 하천차수는 3차수, 일차하천수는 11~15개 또는 16개 이상, 사면경사는 31˚이상의 지역으로 평가되었고, II급지(위험지역)는 변성암지역으로 활엽수림이며 임령은 21~24년생, 토심은31~40cm, 토성은 미사질식양토(SiCL) 또는 사질식양토(SCL), 석력함량은 11~20%, 사면방위는 남~서(S~W)사면, 주하천길이는 1,501~2,500m, 총하천수는 6~10개, 총하천길이는 3,501~5,500m, 하천차수는 2차수, 일차하천수는 6~10개, 사면경사는 31˚이상의 지역으로 평가되었으며, III급지(비 위험지역)는 퇴적암지역으로 임상은 혼효림, 임령은 25년생 이상, 토심은 41~50cm, 토성은 미사질식양토(SiCL), 석 력함량은 10% 이하, 사면방위는북~서(N~W)사면, 주하천길이는 500m 이하, 총하천수는 5개 이하, 총하천길이는 1,000m 이하, 하천차수는 1차수, 일차하천수는 2개 이하, 사면경사는 25˚이하의 지역으로 평가되었다. 붕괴위험 예측치를 이용하여 붕괴위험지역을 예지한 결과 점수의 합계가 I급지는 4.8052점 이상이며 II급지는 4.8051점에서 2.5602점 사이에 해당하며 III급지는 2.5601점 이하의 지역으로 분석되었다.

In this report, we provide the focus on suggesting a method of estimating and measurement of CBM(Customer Behavior Model). Through the use of internet, a new trend of business for e-CRM on B2C Web Site known as EC has emerged. The purpose of this study is to identify the relationship between the customers of a shopping mall and CBM characteristics. It can be used to gain a better understanding of customers. From this we can determine trends, and so refine business toward customer's needs and target new products to particular customer groups. Result shows that there is a significant relationship between the customers pattern of shopping mall and CBM, CVM(Customer Visit Model).

This research analyzes clean room major fire prevention standard of clean Room(FM, IRI, and NFPA Code), the structure of Performance-Based Fire Safety Design(PBD) applied the korean fire industry situation. Performance-Based Fire Safety can operate effectively the performance of fire protection equipment & building design, so the fitness of fire safety system can be embodied by operating this. moreover, cost to be consume fire safety of real building can reduce and Performance-Based Fire Safety is considered to important technique in fire protection field. A fire in a clean room may cause a serious loss by spreading smoke particles. We will be investigated by using a computational fluid dynamics, for loss prevention by smoke spreading from one fire area to another for clean room and compared the Performance-Based Fire Safety Design with the prescriptive code design. The methodology of fire safety performance-based fire safety design and guarantee of many kinds design skill of fire system and developing design procedure will be very serious one in order to improve efficiency of domestic system. Therefore, This research will be contributing to secure safety of clean room and to set up the performance-based fire safety design in Korea by regulation for the performance-based fire safety design effectively.

This study was attempted to analyze risk factors and suggest accident prevention in live line works for power transmission lines to be developed and applied in Korea. Safety problem cannot but occur at development of live line works and application to the field. With respect to this, problems likely to occur in the field among works adopting methods of works including live line works for power transmission lines were investigated and analyzed through documentary survey and risk assessment method. The results are summarized as follows. A risk assessment method model was suggested. This method enables scientific and systematic development of safety control. That is, the owner may autonomously induce safety control and build risk assessment database by work process to use them as best training data for workers. Also, in the field, it may induce all workers to participate in safety program and secure safety by making workers seek for safety working method under smooth flow from looking at risk factors to accident prevention activities. It is deemed that this humble study will prevent both accident and injury likely to occur in live line works for power transmission lines.

This paper is intended to compare the hazard rate estimations from Bayesian approach and maximum likelihood estimate(MLE) method. Hazard rate frequently involves unknown parameters and it is common that those parameters are estimated from observed data by

Fuzzy information representation of multi-source spatial data is applied to landslide hazard mapping. Information representation based on frequency ratio and non-parametric density estimation is used to construct fuzzy membership functions. Of particular interest is the representation of continuous data for preventing loss of information. The non-parametric density estimation method applied here is a Parzen window estimation that can directly use continuous data without any categorization procedure. The effect of the new continuous data representation method on the final integrated result is evaluated by a validation procedure. To illustrate the proposed scheme, a case study from Jangheung, Korea for landslide hazard mapping is presented. Analysis of the results indicates that the proposed methodology considerably improves prediction capabilities, as compared with the case in traditional continuous data representation.

원전 구조물 및 기기의 내진설계를 위한 설계지진의 설정에는 결정론적 방법이나 확률론적 방법이 사용되어 왔다. 최근에는 확률론적 지진재해도 분석이 일반화 되면서 확률론적으로 설계지진 및 평가용 지진의 설정 방법이 합리적인 방법으로서 인식되어 많이 사용되고 있다. 우리나라의 경우 원전부지에 대한 확률론적 지진재해도 분석이 확률론적 지진위험도 평가의 일환으로 대부분 완료되어 있다. 본 연구에서는 확률론적 지진재해도의 재분해를 통하여 확률론적 시나리오 지진을 산정할 수 있는 기법을 확립하고 국내 원전 부지에 대한 확률론적 지진재해도 분석 결과를 이용하여 계산 예를 수행하였다. 이 기법을 사용하면 내진설계 및 내진안전성 평가에 활용할 수 있는 확률론적 시나리오 지진을 설정할 수 있어 매우 유용한 것으로 판단되며 합리적인 시나리오 지진의 산정을 위해서는 합리적인 지진구역도 및 감쇄식의 개발이 필요하다.

The objectives of this study is to achieved by the use of the conceptual approach and accident data bases to develop statistical accident analysis, effectiveness values, comparison analysis of statistical models to determine which variables are significantly related to accidents, human factor, and hazard factor analysis, all of which were used in the railroad crossing. The result from this approach applicable to the railroad crossing where systematic safety management criteria have been considered.

여러 지질재해 중에서 산사태로부터 피해를 최소화하기 위해서는 미래의 산사태에 대해 취약한 지역의 추정이 필요하다. 산사태 위험성의 정량적 분석을 목적으로, 본 논문에서는 확률론적 공간통합 방법인 베이지안 기법의 적용가능성에 대해서 논의하고자 한다. 우선 산사태 발생과 관련이 있는 여러 공간자료의 확률론적 표현을 위해 우도비 함수를 사용하였으며, 베이지안 결합 규칙을 이용하여 최종적으로 통합된 검증을 수행하였다. 이러한 방법의 적용가능성을 검토하기 위하여 1998년 여름 산사태 공간 분포의 분할을 통한 검증을 수행하였다. 이러한 방법의 적용가능성을 검토하기 위하여 1998년 여름 산사태로 피해를 입은 경기도 장흥지역을 대상으로 사례연구를 수행하였다. 사례연구 수행 결과, 우도비에 기반한 베이지안 공간 통합 기법은 효율적으로 다양한 공간 자료를 통합할 수 있었으며, 검증결과는 해석과 의사결정 보조자료로 이용될 수 있을 것으로 기대된다.