Inorganic semiconductor compounds, e.g., CIGS and CZTS, are promising materials for thin film solar cells because of their high light absorption coefficient and stability. Research on thin film solar cells using this compound has made remarkable progress in the last two decades. Vacuum-based processes, e.g., co-evaporation and sputtering, are well established to obtain high-efficiency CIGS and/or CZTS thin film solar cells with over 20% of power conversion. However, because the vacuum-based processes need high cost equipment, they pose technological barriers to producing low-cost and large area photovoltaic cells. Recently, non-vacuum based processes, for example the solution/nanoparticle precursor process, the electrodeposition method, or the polymer-capped precursors process, have been intensively studied to reduce capital expenditure. Lately, over 17% of energy conversion efficiency has been reported by solution precursors methods in CIGS solar cells. This article reviews the status of non-vacuum techniques that are used to fabricate CIGS and CZTS thin films solar cells.

고분자 전해질 막의 성능을 개선하고자 사용된 대표적인 무기물인 solid acid가 첨가된 복합막의 경우 고온에서 높은 열안정성을 나타내며 친수성이 강해지는 장점을 나타내지만 물에 녹는 단점을 가지고 있다. 그러므로 본 연구에서는 phosphotungstic acid(PWA)의 이온전도성을 증가시키며 물에 용해되는 성질을 제거하기 위하여 실리카 입자를 sol-gel법을 이용하여 술폰산기와 아민그룹을 도입시킨 입자를 제조한 후 sulfonated poly(arylene ether sulfone)(SPAES)고분자에 첨가하여 복합막을 제조하였으며 특성평가가 이루어졌다.

Curing behavior and structural property of an inorganic compound added urea-formaldehyde(UF) and urea-melamine-formaldehyde(UMF) were studied. In addition, tensile strength and formaldehyde emission of plywoods made of those resin binders were studied. Curing temperature and structure were not changed, but tensile strengths of plywoods manufactured both with a UF resin and a UMF resin were decreased slightly as increased amount of inorganic compound. Formaldehyde emissions from plywoods were reduced as increased amount of inorganic compound. Wheat flour as an extender was helped to reduce of formaldehyde emission. From the result of this study it might be estimated that using appropriate amount of inorganic compound and proper resin system can be strengthened bond strength and reduced formaldehyde emission.

Yield of potato is largely influenced by drought stress. This study was conducted in Gangneung and Cheongju during the spring cropping of potato. Potatoes in the Gangneung area were affected by drought but there was no damage due to drought in Cheongju. During the early-growth stage, the contents of inorganic components like available phosphate and growth characteristics of the potato leaf in Cheongju were significantly higher than those in Gangneung but there was no difference after the flowering stage. It was considered that the potato plants cultivated in Cheongju could vigorously grow than that of Gangneung under drought stress. In addition, the content of calcium (Ca), which is a secondary messenger related to aging, was found to be higher in potato plants grown in Cheongju than in Gangneung and accumulated more quickly in potato plants of Cheongju. Because magnesium (Mg) was also found to be higher in potato plants from Gangneung by a wide margin, this phenomenon was thought be related with drought stress. The amounts of all inorganic components absorbed from soil were higher in Cheongju than in Gangneung, showing a relatively higher plant biomass in Cheongju. Correlations of development indexes related to leaf showed less or no relation in Gangneung. According to yield characteristics of the harvest stage, although yield was greatly reduced under drought stress condition, the rate of commercial yield was not significantly affected under the drought stress condition. Consequently, it was considered that these responses to drought stress could be utilized to stabilize potato production under the stressful conditions associated with abnormal climate.