유류와 위험 유해물질(Hazardous and Noxious Substances, 이하 HNS)을 포함하는 위험물질의 해상운송 중에 발생하는 사고가 증가하고 있어, 이러한 위험물질 해양사고를 방지할 수 있는 예방대책을 마련해야 할 것이다. 이를 위해 국내에서 발생하는 위험물질 해양사고 자료(2002~2014)를 수집하여 인명 및 환경 위험도를 분석하였으며, 사고원인 규명 및 적절한 예방대책이 필요한 우선 안전관 리분야를 파악하고자 하였다. 인명위험도는 선박 수리 및 탱커세정(tank cleaning) 작업과정에서 발생하는 폭발 및 인명사고 중 질식 등 이 높은 것으로 분석되었다. 환경위험도는 충돌, 좌초 등에 의한 유출사고로 인해 발생하였다. 또한 비포장 상태의 위험화물을 선박에 적재 중 취급부주의로 인하여 유출사고가 일어났다. 다수의 사고는 적합한 안전장비 미착용, 취급 부주의 등 인적오류로 인한 사고로 서 관리·감독을 강화하고, 주기적인 교육·훈련을 통하여 사고 저감이 가능하다. 위험물질 해양사고를 예방하기 위해서는 물질 자체 고 유의 특성상 유해성과 위험성을 지닌 위험물질(유류와 HNS)에 대한 안전관리를 더욱 강화해야 한다.

Skin barrier function can be assessed non-invasively, including by transepidermal water loss (TEWL), skin hydration, and sebum level. The aim of this study was to evaluate day-to-day variation in measurements of TEWL, skin hydration, and sebum level at various anatomic sites and the relationship between these parameters in normal dogs. Measurements were repeated five times on two separate days in five clinically normal Beagle dogs at seven anatomic sites, i.e., the left and right pinnae, left and right axillae, left and right groin areas, and ventrum. Coefficient of variation was used to show the variation in measurements. Correlations between each of the measurements were analyzed to determine the contribution of skin hydration and sebum level to TEWL. There was no variation in the measurements obtained according to time or anatomic site (P>.0.05). The coefficient of variation was highest for sebum level (209.0 ± 81.8%) followed in descending order by skin hydration (62.7 ± 34.5%) and TEWL (41.1 ± 6.9%). Of the seven anatomic sites sampled, the left and right pinnae showed the lowest variation in repeated measurements for TEWL (39.2%), skin hydration (29.6%), and sebum level (75.5%). There was no significant relationship between the results for each measurement (P>.0.05). Because of its relatively low variation on repeated measurement, TEWL might be the most useful way of evaluating skin condition in dogs.

This paper asserts that the deepest background of all depression lies in the emptiness and meaninglessness caused by ‘ultimate loss,’ and that the key to overcoming it is to restore the sense of ‘transcendence’ and ‘connection.’ The characters appearing in The Vegetarian by Kang Han are all lonely human beings. They live in their own way, but they are not truly alive. In their lives, they do not properly create what Robert J. Lifton calls a ‘formulation.’ They are not connected with each other and have no symbolic integration with ‘Ultimate Reality.’ They are living in a moribund life trapped by their own trauma or emptiness. At the same time, they all show signs of depression and suicidal impulse. Therefore, by observing the novel, this paper examines human lives in modern times where depressions are prevalent, and suggests ways to solve such problems.

The purpose of this study was to investigate the fad dieting status and needs of nutrition education on healthy dieting in male and female collegians according to the desired loss weight. The subjects were 611 students (287 males, 324 females) from universities in Gyeonggi and Gangwon provinces in Korea. The subjects were divided into the following four groups based on the difference between their current body weight and their desired body weight: no desired weight loss (WL0), desired weight loss less than 5 kg (WL5), desired weight loss 6 to 10 kg (WL10), and desired weight loss more than 11 kg (WL11). The fad dieting status was surveyed using a questionnaire about 11 selected trendy dieting methods. The higher desired weight loss group showed higher current weight and BMI in both males and females. Self weight overestimation was higher in the females than in the males, and in the WL10 group than in the other groups of males. As desired loss weight increased, weight loss trials and experienced trendy dieting types increased in both males and females. In the male subjects, the experience of the half meal diet and the chicken breast diet was significantly associated with the desired loss weight. In females, trials of more trendy diet types including the half meal diet, cereal diet, fasting, and Atkins diet were significantly associated with the higher desired loss weight. The need for nutrition education on healthy dieting was high among all the different desired weight loss groups, showing that a minimum of 60% of subjects in each group answered ‘necessary and strongly necessary’, with the highest in the WL11 group in both males and females. From these results, desired loss weight is associated with higher current weight status, unhealthy weight control practices, and needs for nutrition education in both male and female subjects. Therefore, in the future, nutrition education programs should give greater attention to providing healthy dieting methods for young collegians who desire more weight loss.

Among the information technology and automation that have rapidly developed in the manufacturing industries recently, tens of thousands of quality variables are estimated and categorized in database every day. The former existing statistical methods, or variable selection and interpretation by experts, place limits on proper judgment. Accordingly, various data mining methods, including decision tree analysis, have been developed in recent years. Cart and C5.0 are representative algorithms for decision tree analysis, but these algorithms have limits in defining the tolerance of continuous explanatory variables. Also, target variables are restricted by the information that indicates only the quality of the products like the rate of defective products. Therefore it is essential to develop an algorithm that improves upon Cart and C5.0 and allows access to new quality information such as loss cost. In this study, a new algorithm was developed not only to find the major variables which minimize the target variable, loss cost, but also to overcome the limits of Cart and C5.0. The new algorithm is one that defines tolerance of variables systematically by adopting 3 categories of the continuous explanatory variables. The characteristics of larger-the-better was presumed in the environment of programming R to compare the performance among the new algorithm and existing ones, and 10 simulations were performed with 1,000 data sets for each variable. The performance of the new algorithm was verified through a mean test of loss cost. As a result of the verification show, the new algorithm found that the tolerance of continuous explanatory variables lowered loss cost more than existing ones in the larger is better characteristics. In a conclusion, the new algorithm could be used to find the tolerance of continuous explanatory variables to minimize the loss in the process taking into account the loss cost of the products.1)

Purpose: The purpose of this study was to understand the lived experience of suffering from vision loss in adults with acquired visual impairment in South Korea. Methods: A phenomenological approach was used to inquire about the lived experience of suffering in 10 adults with acquired visual impairment. The data were collected through individual in-depth interviews. All interviews were audio-taped, and verbatim transcripts were made for the analysis. The data were analyzed using Colaizzi’s phenomenological method. Results: Four theme clusters were extracted from the analysis. They were as follows: ‘blindness as nightmare becoming reality,’ ‘locking in the curtain of darkness,’ ‘living with wings lost,’ and finally ‘screaming with a suffering body and mind, in the darkness.’ Conclusion: The findings of this study provide a deep understanding and insights of the lived experience of suffering from vision loss in adults with acquired visual impairment. Based on the results of the study, health professionals can develop better caring programs to support adults with acquired visual impairment, and their family.

This study is intended to look into the effects of employee's working environment on work loss and productivity in overseas construction sites of Korean construction companies. To achieve this, a survey was empirically carried out to overseas construction site experts. The results were as follows. The weight by 5 loss factors of overseas construction projects showed that project management environment was the highest, followed by construction company environment, owner environment, government support environment and entry country environment, which the biggest work loss factor was the project management section. The weight by loss factors of entry country environment showed that local environment was highest, followed by social environment, economical environment, political environment and cultural environment. In other words, awareness and management of weak social bases, which are not well-institutionalized as properties of most preferred loss, are important in that local environment of new entry countries is the most important thing. As for the above-mentioned findings, the most important project management of overseas construction projects will need to take advantage and have know-how for construction companies' ability to cope with a crisis or the most preferred management and loss prevention of owner environment, government support environment and entry country environment.

Machines are physically or chemically degenerated by continuous usage. One of the results of this degeneration is the process mean shift. Under the process mean shift, production cost, failure cost and quality loss function cost are increasing continuously. Therefore a periodic preventive resetting the process is necessary. We suppose that the wear level is observable. In this case, process mean shift problem has similar characteristics to the maintenance policy model. In the previous studies, process mean shift problem has been studied in several fields such as ‘Tool wear limit’, ‘Canning Process’ and ‘Quality Loss Function’ separately or partially integrated form. This paper proposes an integrated cost model which involves production cost by the material, failure cost by the nonconforming items, quality loss function cost by the deviation between the quality characteristics from the target value and resetting the process cost. We expand this process mean shift problem a little more by dealing the process variance as a function, not a constant value. We suggested a multiplier function model to the process variance according to the analysis result with practical data. We adopted two-side specification to our model. The initial process mean is generally set somewhat above the lower specification. The objective function is total integrated costs per unit wear and independent variables are wear limit and initial setting process mean. The optimum is derived from numerical analysis because the integral form of the objective function is not possible. A numerical example is presented.

Process quality control, which prevents problems and risks that may occur in products and processes, has been recognized as an important issue, and SPC techniques have been used for this purpose. Process Capability Index (PCI) is useful Statistical Process Control (SPC) tool that is measure of process diagnostic and assessment tools widely use in industrial field. It has advantage of easy to calculate and easy to use in the field. Cp and Cpk are traditional PCIs. These traditional Cp and Cpk were used only as a measure of process capability, taking into account the quality variance or the bias of the process mean. These are not given information about the characteristic value does not match the target value of the process and this has the disadvantage that it is difficult to assess the economic losses that may arise in the enterprise. Studies of this process capability index by many scholars actively for supplement of its disadvantage. These studies to evaluate the capability of situation of various field has presented a new process capability index. Cpm is considers both the process variation and the process deviation from target value. And Cpm + is considers economic loss for the process deviation from target value. In this paper we developed an improved Expected Loss Capability Index using Reflected Normal Loss Function of Spring. This has the advantage that it is easy to realistically reflect the loss when the specification is asymmetric around the target value. And check the correlation between existing traditional process capability index (Cpk) and new one. Finally, we propose the criteria for classification about developed process capability index.

This study aims to investigate effects of the length of the buoy and sand bag line on the loss of webfoot octopus pot. A numerical modeling and simulation was carried out to analyze the process that the pot gear affected by wave using the mass spring model. Through the simulation, tensions of sand bag line under various condition were investigated by length of buoy and sand bag line. The drag force and coefficient k of an artificial shell used in the webfoot octopus pot was obtained from an experiment in a circular water channel, and the coefficient k was applied to the simulation. To verify the accuracy of the simulation model, a simple test was conducted into measuring a rope tension of a hanging shell under flow. Then, the test result was compared with the simulation. The lengths of the buoy line in the simulation were 1.12, 1.41, 1.80, 2.23, 2.69, and 3.17 times of water depth. The lengths of sand bag line were 10, 20, 30, and 40 meters, and conditions of water depth were 8, 15, 22 meters. 4 meter height and 8 second period of wave were applied to all simulations. As a results, the tension of the sand bag line was decreased as the buoy and sand bag line were increased. The minimum tension of the sand bag line was appeared in conditions that the length of the buoy line is twice of water depth and the sand bag line length is over 40 meters (except in case of depth 8 meters.).

For earthquake loss estimation of building structures in Gangnam-Gu district in Seoul, three scenario earthquakes were selected by comparison of the response spectra of these scenario earthquakes with the design spectrum in Korean Building Code (KBC 2009), and then direct losses of the building structures in the Gangnam-Gu district under each scenario earthquake are estimated. The following conclusions are drawn from the results of damage and loss in the second scenario earthquake, which has a magnitude = 6.5 and epicentral distance =15 km: (1) The ratio of building stocks undergoing the extensive and complete damage level is 40.0% of the total. (2) The amount of direct economic losses appears approximately 19 trillion won, which is 1.2% of the national GDP of Korea. (3) About 25% of high-rise (over 10-story) RC building wall structures, were inflicted with the damage exceeding moderate level, when compared to 60% of low-rise building structures. (4) From the economical view point, the main loss, approximately 50%, was caused by the damage in the high-rise RC wall building structures.

Control Chart is a graph which dots the characteristic values of a process. It is the tool of statistical technique to keep a process in controlled condition. It is also used for investigating the state of a process. Therefore many companies have used Control Chart as the tool of statistical process control (SPC). Products from a production process represent accidental dispersion values around a certain reference value. Fluctuations cause of quality dispersion is classified as a chance cause and a assignable cause. Chance cause refers unmanageable practical cause such as operator proficiency differences, differences in work environment, etc. Assignable cause refers manageable cause which is possible to take actions to remove such as operator inattention, error of production equipment, etc. Traditionally x-R control chart or x-s control chart is used to find and remove the error cause. Traditional control chart is to determine whether the measured data are in control or not, and lets us to take action. On the other hand, RNELCC (Reflected Normal Expected Loss Control Chart) is a control chart which, even in controlled state, indicates the information of economic loss if a product is in inconsistent state with process target value. However, contaminated process can cause control line sensitive and cause problems with the detection capabilities of chart. Many studies on robust estimation using trimmed parameters have been conducted. We suggest robust RNELCC which used the idea of trimmed parameters with RNEL control chart. And we demonstrate effectiveness of new control chart by comparing with ARL value among traditional control chart, RNELCC and robust RNELCC.

This study aims to find an appropriate window for apartment to provide proper sound insulation. To achieve this goal, measured windows with various thicknesses of the sound insulation performance of inner air space and sound absorption materials in the inner air space. As a result of this study the improvement of the sound insulation performance of windows was shown through the analysis and the measuring of window these characteristics. These results may be applied to the manufacture of window frames and provide basic data for the improvement of the sound insulation performance of windows.

Control chart is representative tools of statistical process control (SPC). It is a graph that plotting the characteristic values from the process . It has two steps (or Phase). First step is a procedure for finding a process parameters. It is called PhaseⅠ. This step is to find the process parameters by using data obtained from in-controlled process. It is a step that the standard value was not determined. Another step is monitoring process by already known process parameters from PhaseⅠ. It is called Phase Ⅱ. These control chart is the process quality characteristic value for management, which is plotted dot whether the existence within the control limit or not. But, this is not given information about the economic loss that occurs when a product characteristic value does not match the target value. In order to meet the customer needs, company not only consider stability of the process variation but also produce the product that is meet the target value. Taguchi’s quadratic loss function is include information about economic loss that occurred by the mismatch the target value. However, Taguchi’s quadratic loss function is very simple quadratic curve. It is difficult to realistically reflect the increased amount of loss that due to a deviation from the target value. Also, it can be well explained by only on condition that the normal process. Spiring proposed an alternative loss function that called reflected normal loss function (RNLF). In this paper, we design a new control chart for overcome these disadvantage by using the Spiring’s RNLF. And we demonstrate effectiveness of new control chart by comparing its average run length (ARL) with x-R control chart and expected loss control chart (ELCC).

One of functions of Galla Rhois (GR) is reportedly an anti-inflammatory effect on the several inflammatory diseases. However, an effect of GR related to periodontitis has not been investigated. In the present study, we examined the effect of the hexane extract of Galla Rhois (GR-H) on periodontitis. Cytotoxicity was assessed by MTS analysis using human gingival fibroblast (hGF) cells. Experimental periodontitis was induced by injecting E.coli LPS into the palatal gingiva maxillary molar thrice weekly for 3 weeks (LPS group). GR-H diluted in 1xPBS was orally administrated using a syringe at 30 mg/kg body weight and 100 mg/kg body weight once a day (GR-H group). GR-H effect on the alveolar bone loss (ABL) was digitized with a micro-CT. GR-H treatment at concentrations exceeding 0.5 mg/ml showed cytotoxic effect in hGF cells. The micro-CT among groups were presented for the different distances from cemento-enamel junction (CEJ) to alveolar bone crest (ABC). The results indicated an inhibitory effect on alveolar bone loss for orally administered GR-H in a model of LPS-induced periodontitis.

In the manufacturing industry fields, thousands of quality characteristics are measured in a day because the systems of process have been automated through the development of computer and improvement of techniques. Also, the process has been monitored in database in real time. Particularly, the data in the design step of the process have contributed to the product that customers have required through getting useful information from the data and reflecting them to the design of product. In this study, first, characteristics and variables affecting to them in the data of the design step of the process were analyzed by decision tree to find out the relation between explanatory and target variables. Second, the tolerance of continuous variables influencing on the target variable primarily was shown by the application of algorithm of decision tree, C4.5. Finally, the target variable, loss, was calculated by a loss function of Taguchi and analyzed. In this paper, the general method that the value of continuous explanatory variables has been used intactly not to be transformed to the discrete value and new method that the value of continuous explanatory variables was divided into 3 categories were compared. As a result, first, the tolerance obtained from the new method was more effective in decreasing the target variable, loss, than general method. In addition, the tolerance levels for the continuous explanatory variables to be chosen of the major variables were calculated. In further research, a systematic method using decision tree of data mining needs to be developed in order to categorize continuous variables under various scenarios of loss function.