A conventional lumped-mass stick model is based on the tributary area method to determine the masses lumped at each node and used in earthquake engineering due to its simplicity in the modeling of structures. However the natural frequencies of the conventional model are normally not identical to those of the actual structure. To solve this problem, recently an updated lumped-mass stick model is developed to provide the natural frequencies identical to actual structure. The present study is to investigate the seismic response accuracy of the updated lumped-mass stick model, comparing with the response results of the shaking table test. For the test, a small size four-story steel frame structure is prepared and tested on shaking table applying five earthquake ground motions. From the comparison with shaking table test results, the updated model shows an average error of 3.65% in the peak displacement response and 9.68% in the peak acceleration response. On the other hand, the conventional model shows an average error of 5.15% and 27.41% for each response.

구조물의 내진설계 또는 내진성능평가를 위해서는 구조물의 축소모형을 이용한 실험적 분석이나 유한요소모델을 기반으로 한 수치적 방법이 고려된다. 수치적 방법을 위해서는 정교한 모델링이 요구될 경우 3차원 유한요소해석을 실시하나 민감도 분석이나지진 취약도 분석과 같은 방대한 지진데이터를 이용한 평가에서는 집중질량모델이 선호된다. 하지만 기존의 집중질량모델은 일반적으로구조물의 기하학적 형상을 고려하여 집중질량을 산출하는 방식인데, 이 경우 제공되는 고유치는 실구조물의 고유치와 일치하지 않는다.본 연구에서는 이러한 문제점을 개선하고 실구조물과 유사한 동적 거동을 발현하는 새로운 형식의 주파수 순응형 집중질량모델을 제안하였다. 제안된 모델은 실구조물의 고유치와 고유 벡터, 모드 형상 등을 고려하여 생성하며, 모델의 성능을 검증하기 위해 비균일 단면을갖는 기둥에 대해 동적해석을 수행하였다. 또한 감쇠비에 따른 동적성능을 분석하기 위해 1%에서 5%까지의 Rayleigh Damping 적용하여 그 결과를 유한요소모델 결과와 비교하였다.

An advanced lumped-mass stick (LMS) model introduced in this paper is to overcome the disadvantages of the conventional lumped mass stick model, such as frequency error and low accuracy of dynamic responses. In order to show the performance of the advanced lumped-mass stick model, the experimental test using shaking table is conducted, considering a scaled four-story frame structure. The material of the frame model is stainless and the total mass of the model is about 39kg. The displacement and acceleration responses resulted from the advanced LMS model are compared with those of experimental results, including the response results of the conventional LMS model of the frame model.

Frequency-adaptive Lumped Mass Stick (LMS) method has been proposed recently to present the dynamic responses of a structure by a stick model which has identical frequencies to the original structure. The masses of the LMS model are obtained by an iterative method following a sequence of equations, where the masses always converge to certain values. Those values are solutions of a nonlinear equations system as will be shown in this study. This paper also investigates the significance of masses locations on the dynamic responses of the LMS models.