Since rice is the main food in Korea, there are no regulations on corn milling yet. Corn is known as one of the world's top three food crops along with wheat and rice, and it is known that 3.5 billion people worldwide use corn for food. In addition, corn mills are not developed or sold in Korea, but the use of corn mills is increasing significantly in many countries in Southeast Asia. In the Philippines, as Korea's rice mill import increases, Korea's KAMICO (Korea Agricultural Machinery Industry Cooperative) and domestic company A agreed to develop a corn mill jointly with PHilMech, an organization affiliated with the Philippine Ministry of Agriculture. However, research on corn milling was very insignificant, so the development was carried out based on the technology of Korea's rice mill. Rice milling is performed by peeling off the skin of rice and producing brown or white rice, so it is carried out by removing the skin and cutting the skin. On the other hand, in the corn mill, the skin of the corn is peeled, pulverized and selected to produce main products suitable for edible use. Therefore, in order to develop a corn mill, processes such as peeling, transfer, grinding, sorting, and by-product separation are required, and suitable parts must be developed. In addition, the performance must be gradually improved through experiments in which corn is repeatedly milled. The Philippines produces 7.98 million tons/year of corn, which is about 100 times that of Korea, and is mostly consumed as a staple food. This is about 10% of the total crop production in the Philippines. In addition, the main cultivation complexes of corn are the mountainous regions of Tarlac or Pangasinan, and the produced corn is 72.4% of the so-called yellow corn called Arabel and Sarangani, and the remaining 27.6% are known as white corn. In this study, it was intended to produce grains of 2.5 mm or less suitable for food for yellow corn and to develop a corn mill for 200 kg per hour. Detailed conditions for development are stipulated as more than 55% of the main product recovery rate, more than 31% of the by-product recovery rate, less than 5% of the raw material loss rate, and more than 80% of the embryo dislocation rate. In this study, to achieve this, the overall process of the corn mill was developed, and the optimal conditions for the corn mill were obtained through the development of parts and empirical tests to improve performance. In addition, it was intended to achieve the development goal by evaluating and analyzing the performance of each part so that it did not conflict.

In electric vehicles, the core is a secondary cell battery. Raw material is pulverized by the grinding disc in the Classifier Separator Mill (CSM) and rises through the Classifier Wheel. Both require characteristics to withstand high-speed rotation, including abrasion, corrosion, and shock. Our study analyzes the impact of RPM and heat source on temperature, convergence, and durability. In conclusion, high heat increases flow, while high RPM reduces the maximum temperature but may harm durability. Proper RPM settings enhance durability.

Milling facilities, which belong to the front end of the nuclear fuel cycle, are essential steps for utilizing uranium in nuclear power generation. These milling facilities currently provide the International Atomic Energy Agency (IAEA) with the location and annual production capacity of the facility through the Additional Protocol (AP, INFCIRC/540) and grant IAEA inspectors on-site sampling authority to apply safeguards to the facility. However, since milling facilities process a large amount of nuclear material and the product uranium ore concentrate (UOC) is bulk material, the absence of accounting for the facility could pose a potential risk of nuclear proliferation. Therefore, this study proposes technical approach that can be utilized for safeguards in milling facilities. Since the half-life of uranium isotopes is much longer than that of its daughter, they reach the secular equilibrium condition. However, after milling process, the fresh tailing showed the break of that secular equilibrium. As time goes on, they newly reach another secular equilibrium condition. Based on this observation, this study discussed the feasibility of the ratio method in safeguards purpose. The scenario applied in this study was 1% of uranium mill tailing. It was observed that the U-238/Th-234 and U- 238/Pa-234m ratios in fresh milling tails varied as a function of time after discharging, particularly during the first one year. This change can be worked as a significant signature in terms of safeguards. In conclusion, the ratio method in mill tails could be applicable for safeguards of nuclear milling facility.

자유주의 페미니즘의 선구적 사상가로 불리는 존 스튜어트 밀은 여성 의 종속 현상은 여성에 대한 사회적 억압과 잘못된 교육 때문이라고 보 았다. 여성과 남성은 자라나는 환경이 다르기 때문에 능력에도 차이가 나타나므로 여성에게도 많은 선택의 자유와 남성과 동등한 기회가 주어 진다면 여성도 자신의 잠재적인 능력을 발휘할 수 있다고 보았다. 밀은 말과 행동 사이에 아무런 갈등을 보이지 않는 사상가로서 여성의 지위 향상을 위한 노력을 자신의 저서와 실제 정치를 통해서 전개 시켜 나간 최초의 정치가이기도 하다. 이러한 밀의 주장은 여성만을 위한 것이 아 니라 인류 전체의 발전을 위해서도 필요한 것이다. 그러나 밀의 주장은 선택된 소수의 여성들에게 선거권을 주고 소수의 여성들에 대한 교육의 확대에 관심을 두었기 때문에 중산층 여성을 중심으로 한 엘리트주의라 는 비판을 받기도 한다. 하지만 19세기 서구의 시대적 상황을 고려할 때 밀의 주장은 매우 혁신적인 주장이었고 여성문제에 대한 가장 근본적인 문제를 다루었다는 측면에서 현재의 양성평등 실현에도 지대한 영향을 미쳤다고 평가할 수 있다.

최근 새로운 엽채류로 관심받고 있는 루꼴라의 주요 해충에 대한 발생과 피해정보는 물론 주요 해충인 파밤나방을 효율적으로 방제할 수 있 는 살충제를 선발하였다. 2019년부터 2021년까지 경기도 화성과 고양의 루꼴라 포장에서 발생한 해충은 모두 4목 7과 9종이었다. 이중 피해가 높았던 파밤나방에 대해 시판 살충제의 방제 효과를 포장에서 검정한 결과, Spinetoram SC, fluxametamide EC, chlorantraniliprole WG, cyantraniliprole DC, emamectin benzoate EC는 루꼴라 재배 포장 2개소에서 95% 이상의 높은 살충효과를 보였고 2배량에서도 약해가 없어 루꼴라 재배지에서 파밤나방 방제 전용 살충제로 등록되어 이용이 가능할 것으로 판단된다.

Lithium-ion battery (LiB) is one of the special issues on nowadays and diverse researches to develop LiB with better performances have been carried out so far, especially, regarding improved properties of each component such as cathode, anode, separator and electrolyte. However, there are limited information on ‘processing’ to prepare each component, and especially fabrication of cathode is strongly dependent on thinky mixer to realize homogeneous dispersion of active materials and conductors in binders. Herein, we report on preparation of LiNi0.8Co0.1Mn0.1O2 (NCM811) based cathode materials with different carbon conductors (CNT and carbon black) using homogenizer and three-roll milling method. These processes are turned out perfect alternative to prepare cathode electrode. LiB cells were assembled using the dispersed electrode slurry and the performance of a cell was electrochemically stable, even in the case of a CNT conductor, which is normally difficult to make perfect dispersion because of its strong Van der Waals attraction between the tubes and π–π interactions.

This study attempts to find optimal conditions of the friction coefficient using a discrete element method (DEM) simulation with various friction coefficient conditions and three different grinding media with various ball sizes in a traditional ball mill (TBM). Using ball motion of the DEM simulation are obtained using the optimal friction coefficient compared with actual motion; photographs are taken by the digital camera and the snapshot images are analyzed. In the simulation, the rotation speed of the mill, the materials and velocity of the grinding media, and the friction coefficient between the balls and the wall of the pot are fixed as the actual experimental conditions. We observe the velocity according to the friction coefficient from the DEM simulation. The friction coefficient is found to increase with the velocity. Milling experiments using a traditional ball mill with the same experimental conditions as those of the DEM simulation are conducted to verify the simulated results. In addition, particle morphology change of copper powder is investigated and analyzed using scanning electron microscopy (SEM) for the milling experiment.

The purpose of this study is to prepare WO3 nanopowders by high-energy milling in mixture gas (7 % H2+Ar) with various milling times (10, 30, and 60 min). The phase transformation, particle size and light absorption properties of WO3 nanopowders during reduction via high-energy milling are studied. It is found that the particle size of the WO3 decreases from about 30 μm to 20 nm, and the grain size of WO3 decreases rapidly with increasing milling time. Furthermore, the surface of the particles due to the pulverization process is observed to change to an amorphous structure. UV/Vis spectrophotometry shows that WO3 powder with increasing milling times (10, 30, 60 min) effectively extends the light absorption properties to the visible region. WO3 powder changes from yellow to gray and can be seen as a phenomenon in which the progress of the color changes to blue. The characterization of WO3 is performed by high resolution X-ray diffractometry, Field emission scanning electron microscopy, Transmission electron microscopy, UV/Vis spectrophotometry and Particle size analysis.

본 연구는 원통형 종이포트를 활용한 토마토 육묘시, 염스트레스를 활용하여 고온기 도장 억제가능성을 검토하기 위하여 수행되었다. 시험구는 K2SO4, KCl과 KH2PO4을 각 5, 10 dS·m-1로 처리하였고, 또한, 토마토 모종에 고염도의 칼륨을 처리하여 수분 및 저온스트레스 환경에서의 적응성 및 생존성을 조사하였다. 조사결과, 처리 농도가 높아질수록 지상·지하부 건물중, 옆면적, 순동화율 (NAR)이 감소하고, 경경과 충실도는 증가하였다. 수분 스트레스 처리 이후, 대조구는 심한 위조현상을 보였지만, KCl처리구는 양호하였다. 상대수분함량은 대조구에서 23%, KCl처리구에서 8% 감소 하였다. 또한, 대조구에 비하여 KCl 처리구는 저장시(9, 12 및 15°C) 모종의 손상 비율이 낮았다. 이와 같은 결과로 보아, KCl과 같은 고농도의 칼륨 처리가 원통형 종이포트 토마토 육묘의 도장 억제에 효과적이며 환경 스트레스 내성을 향상시키는 것으로 판단된다.