The concrete wall panels are composed of various members such as studs, brackets, bolts and nuts, etc. Embedded studs in the concrete wall resist transferred lateral and horizontal load in the structure. The thickness of the concrete wall influences shear behavior of embedded studs. The finite element analysis was carried out with respect to the thickness of the concrete wall to investigate shear behavior of embedded studs. The numerical analysis results were compared with the experimental results and confirmed that The deformation of the stud anchor is reduced with an increase of the thickness of the concrete wall.

In this paper, a numerical experiment on a tidal turbine was performed based on a water wheel design using the commercial CFD code ANSYS-CFX to contribute to the development of water wheels. The water wheel type tidal turbine was studied with different numbers of rotor blades (including ten, twelve and twenty blades types) and with different blade shapes (Straight, Curved and Zuppinger types) for comparison at several values of tip speed ratio (TSR) ranging from 0.7 to 1.2. The numerical results indicated that the 10-bladed type and the Straight-bladed type turbines absorb the highest power efficiency, up to 43 % at TSR 0.9. In addition, the 20-bladed and the Curved-bladed types showed the lowest performances in all cases of TSRs comparing with the others. Besides that, it was found that this turbine operates much effectively at low range of TSR, especially at TSRs 0.9 and 1 for all cases of blade shapes and all numbers of blades.

This study analyzes gestation stall structures with high strength concrete. The ANSYS program described in this paper is effective not only because it shows good accuracy but also it shows the goodness of parameter studies by using APDL(ANSYS Parametric Design Language). We have performed the various parameter studies by thickness change. The results is presented by using contours and tables. The analysis results showed that it was effective to increase the height thickness(tz) rather than longitudinal thickness(tx).

The purpose of this study is to investigate the behavior characteristics of new hollow reinforced concrete (RC) bridge pier sections with triangular reinforcement details and to provide the details and reference data. Among the numerous parameters, this study concentrates on the shape of the section, the reinforcement details and the spacing of the transverse reinforcement. Additional eight column section specimens were tested under quasi-static monotonic loading. In this study, the computer program, named RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology), was used. A innovative confining effect model was adopted for new hollow bridge pier sections. This study documents the testing of new hollow RC bridge pier sections with triangular reinforcement details and presents conclusions based on the experimental and analytical findings.

The development of a high pressure cleaning system is needed to properly clean cargo hold and improve the working environment of a ship. For this, the study on the parameters related to the suitable capacity of a pressure pump should be preceded.

본 연구에서는 프리스트레스트 콘크리트 보의 처짐 예측을 위해 재료비선형이 고려된 콘크리트 및 철근, 강연선의 거동을 고려할 수 있는 구성모델을 조합하여 적층 쉘 요소를 사용한 유한요소해석 모델에 적용하였다. 이를 기존 연구자들의 실험결과와 비교함으로써 모델의 타당성을 검증하였고, 스팬-깊이비, 편심 그리고 프리스트레싱 크기에 대한 처짐을 해석하고 이를 수계산 결과와 비교하였다. 그 결과, 스팬-깊이비가 커질수록, 편심이 작아질수록, 프리스트레싱 크기가 작아질수록 처짐이 증가하는 것을 확인하였다. 또한, 편심이 매우 작을 경우와 프리스트레싱 크기가 매우 작을 경우에는 수계산이 처짐을 과대평가한다는 것을 확인하였다.

본 연구에서는 프리스트레스트 콘크리트 일방향 슬래브의 사용성 평가를 위한 처짐을 분석하기 위하여 유한요소법에 기반한 해석적 연구를 수행하였다. 유한요소 상용 프로그램을 이용한 해석결과와 실험결과를 비교하여 모델링의 타당성을 검증하였으며, 비교적 유사한 결과를 나타내었다. 또한, 콘크리트 압축강도, 편심 거리, 활하중, 그리고 긴장재의 배치형태에 따른 처짐을 분석하여 수계산 결과와 비교하였고, 회귀분석을 통해 변수들과 처짐 사이의 상관관계를 확인하였다. 그 결과, 콘크리트 압축강도가 클수록, 편심 거리가 클수록, 활하중이 작을수록 처짐이 감소하는 것을 확인하였으며, 직선형태의 처짐이 가장 작고 절곡형태의 처짐이 가장 큰 것을 확인하였다. 또한 회귀분석을 통해 콘크리트 압축강도와 편심 거리가 솟음값에 미치는 영향을 분석하였다.

Compare to straight girders, horizontally curved girder shows complicate behaviors because the bending moments and torsional moments are always acting simultaneously. Because of non-uniform torsion, one edge of compression flange is yielded faster than the other edge due to combined vertical and lateral moments. Hence, the strength of cross section need to be investigated with the effect of initial curvature. The design specifications, however, does not consider the curvature effect. In this study, as a basic research, the parametric studies are performed to understand the flange local buckling behaviors of horizontally curved girders.

The purpose of this study is to investigate the inelastic behavior of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and to provide the details and reference data. Among the numerous parameters, this study concentrates on the shape of the section, the reinforcement details, the diameter of the transverse reinforcement and loading types. Eighteen column section specimens were tested under quasi-static monotonic loading. In this study, the computer program RCAHEST (Reinforced Concrete Analysis in Higher Evaluation System Technology) was used. A modified lateral confining effect model was adopted for the hollow bridge column sections. This study documents the testing of hollow reinforced concrete bridge column sections with reinforcement details for material quantity reduction and presents conclusions based on the experimental and analytical findings.:

The docking analysis of a global ship structure is requested to evaluate its structural safety against the reaction forces at supports during docking works inside a dry dock. That problem becomes more important recently as the size of ships is getting larger and larger. The docking supports are appropriately arranged in a dock to avoid their excessive reaction forces which primarily cause the structural damages in docking a ship and, up to now, the structural safety has been assessed against the support arrangement by the finite element analysis (FEA) of a global ship structure. However, it is complicated to establish the finite element model of the ship in the current structural design environment of a shipyard and it takes over a month to finish the work. This paper investigates a simple and fast approach to carry out a ship docking analysis by a simplified grillage model and to assign the docking supports position on the model. The grillage analysis was considered from the motivation that only the reaction forces at supports are sufficient to assess their arrangement. Since the simplified grillage model of the ship cannot guarantee its accuracy quantitatively, modeling strategies are proposed to improve the accuracy. In this paper, comparisons between the proposed approach and three-dimensional FEA for typical types of ships show that the results from the present grillage model have reasonably good agreement with the FEA model. Finally, an integrated program developed for docking supports planning and its evaluation by the proposed approach is briefly described.

Methanol as a carbon source in chemical vapor deposition (CVD) graphene has an advantage over methane and hydrogen in that we can avoid optimizing an etching reagent condition. Since methanol itself can easily decompose into hydrocarbon and water (an etching reagent) at high temperatures [1], the pressure and the temperature of methanol are the only parameters we have to handle. In this study, synthetic conditions for highly crystalline and large area graphene have been optimized by adjusting pressure and temperature; the effect of each parameter was analyzed systematically by Raman, scanning electron microscope, transmission electron microscope, atomic force microscope, four-point-probe measurement, and UV-Vis. Defect density of graphene, represented by D/G ratio in Raman, decreased with increasing temperature and decreasing pressure; it negatively affected electrical conductivity. From our process and various analyses, methanol CVD growth for graphene has been found to be a safe, cheap, easy, and simple method to produce high quality, large area, and continuous graphene films.

기둥은 건물에서 하중을 지지하는 중요한 구성요소이므로 기둥의 손상 또는 파괴는 건물의 연쇄붕괴의 원인이 된다. 특 히 폭발하중에 의한 기둥의 거동평가는 연쇄붕괴 방지에 있어 중요한 요소이다. 본 논문에서는 축하중을 받고 있는 기둥이 폭발하중을 받을 때의 거동과 폭발 저항성능을 평가하였다. 이를 위해 동일단면적과 비슷한 철근비를 가지는 기둥에서 주 철근의 개수를 달리하여 각 변수에 따른 폭발하중에 대한 폭발 저항성능을 평가하였다. 또한, 동일한 성능을 지니는 기둥 에서 단면비를 달리하여 기둥의 폭발 저항성능을 비교하였다. 해석결과, 폭발 직후 충격량에 대한 수직 변형률은 철근의 개수 및 단면비에 영향을 받지 않는 것으로 나타났다. 그러나 수평변형의 경우 폭발압력을 받는 면의 철근 개수가 증가함 에 따라 기둥의 저항성능이 증가하는 것으로 나타났다. 또한, 기둥 단면의 단면 2차모멘트가 클수록 폭발하중에 대한 저항 성능 및 복원력이 더 큰 것을 확인하였다.

Recently, there is to increase interest in seismic performance of piers. Hollow section is applied to increasing the seismic performance of piers. However, hollow RC pier becomes the biaixial confining state because hollow part is not confined. The pier is developed brittle failure from inner face in hollow part. A tube is inserted in hollow part to become the weakness. This is ICH RC(Internally Confined Hollow RC) pier. This pier is enhanced stiffness, strength, and ductility by core concrete has triaxial confining stress. In this paper is researched about parameters effect the seismic performance. Parameters are hollow ratio, transverse reinforcement, longitudinal reinforcement, and concrete strength.

이 연구는 중공 프리스트레스트 콘크리트 교각의 P-M 상관도에 대한 매개변수 분석을 수행한 결과를 제시하고 있다. 다수의 매개변수 중에 콘크리트 압축강도, PS 강재량, 유효프리스트레스, D_s/D_o, 그리고 D_i/D_o를 선택하여 P-M 상관도에 미치는 영향을 중점적으로 다루었다. 준정적 실험을 통해서 중공 프리스트레스트 콘크리트 교각 실험체의 강도와 연성도를 평가하였다. 실험 및 해석결과와 각 코드를 기준으로 비교한 P-M상관도의 결과는 서로 다른 차이를 나타내었으며 AASHTO-LRFD는 근접한 값을 보여주었다. 무차 원화한 P-M 상관도를 중공 프리스트레스트 콘크리트 교각의 저항능력을 예측하기 위하여 제시하였다.

Carbon nanotubes (CNTs) have been synthesized by ferrocene-catalyzed pyrolysis of toluene. The influences of the experimental conditions on the morphology and microstructure of the product have been analyzed. To find the proper temperature for synthesis of CNTs, the experiment was performed in a temperature range from 800 to 1100℃. From content variation of ferrocene and thiophene as the catalyst, morphological change of carbon nanotubes has been observed. Also, the influence of the gas ratio of hydrogen and argon on the nanotube samples was analyzed by scanning electron microscopy and transmission electron microscopy.

본 연구에서는 불과 함께 에스테르화 반응물 및 생성물 일부가 친수성 막을 투과하는 비완전 분리를 고려한 투과증발-촉진 에스테르화 반응모델을 확립하였으며, 이 모사모델에 막 분리 효율 및 물 제거능력을 설명하는 항들을 포함시킴으로써 막 투과분리가 에스테르화 반응에 어떻게 영향을 끼치는가를 공정모사를 통해서 체계적으로 살펴보았다. 모사결과 막을 통한 비완전 분리 즉, 분리막을 통한 반응물의 투과는 역반응을 유발시켜 전체 반응을 지연시키며 그 결과 반응 전 환율은 투과증발 공정을 사용하지 않은 반응보다는 높으나 물에 대한 완전한 투과선택도를 갖는 투과증발 공정을 사용하는 반응시스템보다는 낮음을 알 수가 있었다. 반응 시스템 내에서 장착된 막을 통한 투과로 인한 반응부피의 변화가 반응 속도에 끼치는 영향을 살펴보았는데 반응 초기에는 반응물 농축효과가 지배적이어서 반응을 촉진시키며, 반응이 진행되어 생성물이 형성됨에 따라 생성물 농축효과가 점점 중요해지고 이 효과가 반응의 속도를 감소시킴을 알 수가 있었다. 에스테르화 반응공정 중에 투과증발공정을 적용하는 시점에 따라 반응속도, 반응 전화율이 달라짐을 공정모사를 통해 관찰하였다. 반응 모델 식으로부터 분리막의 성능과 반응 인자들 간의 상관관계는 확립하고 이 상관관계를 주어진 막 분리능력 하에서 반응 인자 조건 설정, 혹은 주어진 반응조건 하에서 막 분리능력을 설계하는 도구로 사용할 수 있다.

해양구조물에서 많이 사용되는 K-Joint는 그 구조특성으로 인해 응력집중이 발생하며 최적 설계를 위한 가이드라인제시가 요구된다. 형상특성에 따른 응력집중 현상이 다르게 발생함으로 형상을 결정하는 각종 변수인 의 변화에 따른 조인트의 응력변화를 분석하였다. 수치적인 패라메트릭 연구를 통해 응력 변화 특성을 제시하였고 주요 요소에 따른 최대 응력값도 나타내었고 수치해석 결과를 실험값과 비교하였다.

The present study is about a 3-dimensional design method based on prototype model using the parametric technique. Until now, architecture design using the computer has been limited to the 2-dimensional level. Although the outputs of some modeling programs appear 3-dimensional, they are basically the outcomes of 2-dimensional perspective drawings or presentations and, in the true sense, cannot be 3-dimensional methods using all variables related to three dimensions. To overcome the limitations and to apply the computer to design in a more useful way, machinery, automobile, aviation and shipbuilding industries have developed 3-dimensional tools based on concepts such as object-oriented modeling technique and parametric technique. However, few of such attempts have been made in the area of architecture. Thus, viewing that, among several methods tried in other industries, the 3-dimensional design technology based on the parametric technique may be usable in architecture design, the present study purposed to examine how to introduce and apply the concept to architecture design. With this purpose, finding the possibility of applying together the object-oriented modeling and the parametric modeling method, which are 3-dimensional modeling methods, and the design prototype method and the previous case based design method, which are design methods，we examined a 3-dimensional architecture design method under the title 'Prototype-based Design Method Using Parametric Technique’ and assessed its possibility by applying the method to real cases experimentally.

비보존력(non-conservative force)을 받는 외팔기둥의 동적 안정성 거동특성을 조사하기 위하여, 전단변형 및 감쇠효과가 고려된 Hamilton의 원리를 적용하고 무차원화 된 운동방정식 및 유한요소 정식화 과정을 제시한다. 유도된 행렬운동방정식을 이용하여 외팔보(Beck's column)의 고유치해석에 의한 정적좌굴(divergence) 및 동적 좌굴하중(flutter load)을 산정하고 Newmark-{\beta}법에 의해서 시간응답해석을 실시한다. 이러한 해석법을 이용한 매개변수연구를 통하여 전단변형 및 회전관성효과, 비보존력의 방향파라미터에 대한 임계하중의 영향, 그리고 내적 및 외적 감쇠하중의 영향이 비보존력계의 동적 안정성에 미치는 영향을 분석한다.

In this paper, various dynamic model of magnetorheological (MR) damper, is required for describing the hysteresis of MR damper and for their application are investigated to structural control. The dynamic characteristics and control effects of the modeling methods for MR dampers such as Bingham, biviscous, hysteretic biviscous, simple Bouc-Wen, Bouc-Wen with mass element, and phenomenological models are studied. Of these models, hysteretic biviscous model which is simple and describes the hysteretic characteristics, is chosen for numerical studies. The capacity of MR damper is determined as a portion of not the building weight but the lateral restoring force.