검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 34

        1.
        2023.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : This study is aimed to economic analysis of the ferronickel slag pavement method carried out to suggest the necessity of developing ferronickel slag pavement technology. METHODS : A life cycle cost analysis of the application of the Ferronickel Slag pavement method and the cutting + overlay pavement method was performed to compare the economic indicators and greenhouse gas emissions for each pavement method. RESULTS : As a result of the analysis, regardless of the Ferronickel Slag mixing rate, if the common performance of the Ferronickel Slag pavement method is the same or superior to the existing pavement method, it is more economical than the existing pavement method. Furthermore, the lower the maintenance cost of the Ferronickel Slag pavement method, the higher the economic feasibility due to the high Ferronickel Slag mixing rate. Greenhouse gas emissions can be reduced from at least 9% to up to 53% through the application of the Ferronickel Slag pavement method, except for some scenario analysis results. CONCLUSIONS : This study provided that the Ferronickel Slag pavement method was superior to the existing pavement method in terms of economic and environmental aspects. Therefore, it was found that the objective justification of developing road pavement technology using Ferronickel Slag was secured.
        4,000원
        2.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : A mechanistic-empirical (ME) predictive design logic that can compute the reflective cracking life of hot-mix asphalt (HMA) overlaid on top of a composite pavement is proposed herein. METHODS : The overlay thickness design and analysis logic of the HMA were formulated based on the ME concept of reflection crack propagation. Climate data, traffic load data, the pavement material properties, and the thickness of each layer of the pavement are the main inputs for the ME-Reflective Cracking Rate (RCR) prediction algorithm. An Microsoft Excel Virtual Basic for Application (VBA) program was created to aid designers in assessing the expected performance of an HMA overlay design. Calibration was done using data from the Long-Term Pavement Performance (LTPP) sections. Sensitivity analysis was conducted to compare the results yielded by the program and data from a report by the Texas Transportation Institute. RESULTS : The predictive model performance effectively generates the dynamic and relaxation modulus curves. The correlation value of the calibration factors, R2, is 0.79. The calibration factors used for the Asphalt Overlay Thickness Design (AOTD) program and the sensitivity analysis, i.e., k1, k2,, and k3,, are set to 5, 5, and 150, respectively. The sensitivity of the AOTD program affords reasonable results. Additionally, the program yields results similar to the trends presented in a report by the Federal Highway Administration. CONCLUSIONS : The proposed ME design logic is successfully translated into an Excel VBA program, AOTD, which can perform routine assessments of laboratory tests for HMA overlays. The program can effectively perform numerous iterations and computations to predict an HMA overlay. The predictive model can generate reasonable dynamic modulus and relaxation modulus curves for the characterization of HMA overlays. Under the same asphalt binder grade and HMA type, doubling the HMA overlay thickness yields three times the expected reflective cracking service life.
        4,000원
        3.
        2022.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : In this study, emissions from asphalt mixture production and construction processes are calculated and used to estimate the emission from each asphalt pavement layer. The calculated emissions for the processes are used as fundamental data to estimate the total emission from the entire life cycle of pavement engineering in South Korea. METHODS : A design proposal and the Korean standard, which provide quantitative information for activities, were used to estimate the amount of construction materials and energy consumption. Subsequently, the LCI DB from NAPA and the LCIA DB from EPA were utilized in conjunction with the estimated quantity to assess the effect of the emissions to determine their environmental impact categories. RESULTS : Calculation results show that 5.84 million ton of CO2eq is discharged from production and construction processes, whereas 3.24 million ton of CO2eq is discharged from operation processes in the pavement engineering sector. The total GHG emission, i.e., 9.08 million ton of CO2eq, is approximately 1.25% of the national GHG emission in 2018. The asphalt mixture production process results in the highest GHG emission in the life cycle of asphalt pavements. CONCLUSIONS : An LCI DB that accounts for the industrial characteristics of South Korea must be established to provide more reliable emission data to be used for national GHG reduction plans, including those for the pavement engineering sector.
        4,000원
        6.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : In this study, the results of an intensive field survey of a composite pavement applied to an expressway in Korea are analyzed. The results are intended to be used as basic data for evaluating the composite pavement and for preparing quality control measures through a review and analysis of the change in the state of the tensile bonding strength of the composite pavement. METHODS : To evaluate, repeated field coring and indoor tensile bonding strength evaluations are conducted for five years, and the commonality evaluation of pavement using pavement condition investigation equipment is conducted annually. RESULTS : The results of this study show that the degree of reflective crack generation varies depending on the type of concrete pavement and type of asphalt mixture applied to the intermediate layer, and that the CRCP composite pavement exhibits better initial commonality than the JCP composite pavement. In addition, it is confirmed that the composite cross-section pavement section with MASTIC applied as an intermediate layer shows excellent adhesion performance between the lower concrete layers from the beginning of construction in all sections, as well as satisfied the quality control standards for good pavement and tensile adhesion even after approximately five years of public use. CONCLUSIONS : Based on a follow-up survey of the composite pavement testing sections, it is confirmed that the section constructed with the MASTIC intermediate layer and CRCP satisfies the quality control standards for good pavement conditions and tensile adhesion even after approximately five years of public use.
        4,000원
        7.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The actual service life of repair methods applied to cement concrete pavement is analyzed based on de-icing agent usage. METHODS : Highway PMS data pertaining to de-icing agent usage are classified into three grades: low (1~5 ton/lane/year), medium (5~8 ton/lane/year), and high (greater than 8 ton/lane/year). The repair methods considered include diamond grinding, patching, joint repair, partial depth repair, and asphalt overlay on five major highways. The service life of each repair method is analyzed based on the usage level of the de-icing agent. RESULTS : The service lives of the applied repair methods are much shorter than expected. It is confirmed that the service life afforded by diamond grinding, patching, and joint repair methods are not significantly affected by the use of de-icing agents, whereas that afforded by asphalt overlay and partial depth repair methods is affected significantly. The service life afforded by the asphalt overlay and partial depth repair methods decreases at high usage levels of the de-icing agent (greater than 8 ton/lane/year). CONCLUSIONS : Among the repair methods considered, the service life afforded by partial depth repair and asphalt overlay is affected significantly by the amount of de-icing agent used. Additionally, the differences between the expected and actual analyzed service lives should be considered in the next-generation maintenance strategy for cement concrete pavements.
        4,000원
        8.
        2018.04 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : The study aims to predict the service life of national highway asphalt pavements through deep learning methods by using maintenance history data of the National Highway Pavement Management System. METHODS: For the configuration of a deep learning network, this study used Tensorflow 1.5, an open source program which has excellent usability among deep learning frameworks. For the analysis, nine variables of cumulative annual average daily traffic, cumulative equivalent single axle loads, maintenance layer, surface, base, subbase, anti-frost layer, structural number of pavement, and region were selected as input data, while service life was chosen to construct the input layer and output layers as output data. Additionally, for scenario analysis, in this study, a model was formed with four different numbers of 1, 2, 4, and 8 hidden layers and a simulation analysis was performed according to the applicability of the over fitting resolution algorithm. RESULTS: The results of the analysis have shown that regardless of the number of hidden layers, when an over fitting resolution algorithm, such as dropout, is applied, the prediction capability is improved as the coefficient of determination (R2) of the test data increases. Furthermore, the result of the sensitivity analysis of the applicability of region variables demonstrates that estimating service life requires sufficient consideration of regional characteristics as R2 had a maximum of between 0.73 and 0.84, when regional variables where taken into consideration. CONCLUSIONS : As a result, this study proposes that it is possible to precisely predict the service life of national highway pavement sections with the consideration of traffic, pavement thickness, and regional factors and concludes that the use of the prediction of service life is fundamental data in decision making within pavement management systems.
        4,000원
        9.
        2017.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES : So far, aged cement concrete pavement on express highways has been rehabilitated mainly with asphalt concrete inlay. However, potholes were the major problem, and they shortened the life of the inlay mainly owing to the poor drainage of water once it infiltrated the interface of the concrete and asphalt. The purpose of this study is to compare the performance and economic efficiency of asphalt overlay and inlayMETHODS: Overlay and inlay were compared through accelerated pavement testing, and a life-cycle cost analysis was conducted in this study using the CA4PRS program.RESULTS and CONCLUSIONS : It was found from accelerated pavement testing that the overlay exhibited reflective crack resistance that was more than twice as effective as that of inlay. The total cost (construction cost + user cost) within the analysis period (20 years) of the overlay was 37% lower than that of the inlay.
        4,000원
        10.
        2016.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        OBJECTIVES : The objective of this research is to determine the integrity of pavement structures for areas where voids exist. Furthermore, we conducted the study of voided-area analysis and remaining life prediction for pavement structures using finite element method. METHODS : To determine the remaining life of the existing voided areas under asphalt concrete pavements, field and falling weight deflectometer (FWD) tests were conducted. Comparison methods were used to have better accuracy in the finite element method (FEM) analysis compared to the measured surface displacements due to the loaded trucks. In addition, the modeled FEM used in this study was compared with well-known software programs. RESULTS : The results show that a good agreement on the analyzed and measured displacements can be obtained through comparisons of the surface displacement due to loaded trucks. Furthermore, the modeled FEM program was compared with the available pavement-structure software programs, resulting in the same values of tensile strains in terms of the thickness of asphalt concrete layers. CONCLUSIONS: The study, which is related to voided-area analysis and remaining life prediction using FEM for pavement structures, was successfully conducted based on the comparison between our methods and the sinkhole grade used in Japan.
        4,000원
        11.
        2015.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: The purpose of this study is to analyze the service life of expressway pavement based on both traffic volumes and use of deicing chemicals. METHODS: A database was built using expressway rehabilitation history information from over the last decade. In order to estimate the service life of expressway pavement, various analysis methods were considered, and a decision was made to perform analysis using a method based on an accumulated rehabilitation ratio. The service life of expressway pavement was then analyzed by classifying the scale of traffic volume and extent of de-icing chemicals used. RESULTS: The service life of PMA and SMA ranged from 7.8 to 10.6 years and from 9.9 to 12.0 years, respectively. The service life of JCP ranged from 16.0 to 22.2 years, and the service life of CRCP was 33.5 years on average. Results of assessing service life according to traffic volumes and de-icing chemicals showed that the lower the traffic volumes were, the greater the service life of PMA and JCP, and the less that de-icing chemicals were applied, the greater the service life of JCP. CONCLUSIONS : The dependence of expressway pavement service life on traffic volumes and de-icing chemicals makes it possible to apply LCCA for regional maintenance plans and cost-effective selection of expressway pavement type.
        4,000원
        13.
        2012.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        PURPOSES: The new methodology is proposed for estimation of long-term performance and pavement life based on the national highway database in Daejeon area. Furthermore, this study tried to verify the applicability of performance estimation using NHPCI (National Highway Pavement Condition Index) on tendency of pavement deterioration as time goes by under Korean road environments. METHODS: Reliability theories are applied to estimate the mean life and to determine the appropriate distribution using 3 levels of traffic loads (high, medium, low) based on maintenance and rehabilitation history data for 15 years. RESULTS: As a result, Lognormal distribution is suitable for explanation of pavement lifetime in Daejeon area regardless of traffic loads. In addition, we found that the results of mean life and maintenance timing based on NHPCI for the pavement sections of 3 levels of traffic loads are available. CONCLUSIONS: Based on this study, it was found that mean life of high, medium and low levels of traffic loads are about 8.1 years, 12.2 years and 12.7 years, respectively. Higher level of traffic loads shorten the pavement mean life.
        4,000원
        17.
        2011.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        국내 고속도로의 60% 이상이 시멘트 콘크리트 포장으로 건설되었으며, 그 중 공용년수가 20년이 넘어선 구간이 절반 이상에 달하고 있다. 노후화된 시멘트 콘크리트 포장의 보수 보강은 국내의 도로 교통여건상 우회도로가 준비되기 어렵기 때문에 조기 교통개방이 요구되며 현재까지는 주로 아스팔트 덧씌우기가 사용되고 있다. 반면에 아스팔트 포장은 조기파손과 잦은 보수 때문에 보수 보강에 대한 비용이 크다. 현 시점에서 아스팔트 덧씌우기가 국내에서 가장 많이 사용되고 있는 현실을 감안할 때, 아스팔트 덧씌우기의 수명에 미치는 영향인자가 무엇인지 검토할 필요가 있다. 따라서 아스팔트 덧씌우기 공법의 성능에 영향을 미치는 인자에 대해 조사할 필요가 있으나, 국내의 경우 아스팔트 덧씌우기의 공용 중 파손상태에 대한 자료가 체계적으로 구축되어있지 않다. 본 연구에서는 아스팔트 덧씌우기 수명과 영향인자간의 상관성을 비교하기 위해 다양한 파손자료를 구축하고 있는 미국의 LTPP data를 이용하여 노후화 된 시멘트 콘크리트 포장의 아스팔트 덧씌우기에 대해 조기파손을 방지하고, 효율적인 보수 보강을 위해서 아스팔트 덧씌우기 구간의 수명에 미치는 영향인자에 대해서 통계분석을 수행하였다.
        4,800원
        18.
        2010.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 신뢰성 개념을 도입하여 최근 10년간의 수원과 의정부 지역의 일반국도 아스팔트 포장구간의 수명 데이터를 기반으로 적합한 모수적 수명분포 선정과 헤저드 함수 및 생존확률을 추정하였다. 최적 수명분포형을 찾기 위해 확률지 개념을 이용하여 모수를 추정하였으며 적정 확률분포형태의 결정은 Anderson-Darling 통계값을 이용하였다. 그 결과 분석 대상 지역 포장의 수명 데이터를 가장 잘 설명하는 수명분포는 대수정규(Lognormal)분포인 것으로 분석되었다. 또한 본 연구에서 제안한 대수정규분포에 의해 추정된 생존확률함수는 실제 관측값과 차이가 거의 없음을 확인하였다. 본 연구에서 제안한 신뢰성 개념을 이용한 분석 방법은 포장관리 및 유지보수 데이터가 축적되어감에 따라 비교적 용이하게 계속 update가 가능하며 따라서 보다 정확한 포장수명에 대한 신뢰도 값에 접근해 갈 수 있는 이점이 있다.
        4,000원
        19.
        2009.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 아스팔트 콘크리트 포장의 표층 프로파일과 차량특성인 차량속도와 현가장치를 다르게 하여 트럭 시뮬레이션 프로그램을 통한 동적하중을 분석하였다. 다양한 포장 상태의 프로파일을 입력하여 동적하중을 분석하였으며 프로파일, 차량의 현가장치, 차량속도에 따른 동적하중 변화를 분석하였다. 포장 거칠기가 증가할수록 동적하중이 증가하였으며, 속도가 증가할 수 록 동일한 포장 거칠기 하에서 동적하중이 증가하였다. Walking beam 현가장치가 Air spring 현가장치에 비해 더 큰 동적하중을 보였다. 동적하중 공분산을 이용하여 포장파손 지수를 결정하였으며, 동적하중 공분산과 신뢰도, 아스팔트 혼합물의 파괴매개변수가 증가할 수록 포장파손지수도 증가하였다. 본 연구의 결과를 이용하여 차량속도와 표층 아스팔트 혼합물 파괴특성에 근거한 포장 평탄성 규정에 이용할 수 있으며, 아스팔트 콘크리트 포장 시공 후 포장 평탄성에 근거한 지불규정에 효과적으로 사용할 수 있다고 판단된다.
        4,000원
        20.
        2009.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        이 논문에서는 아스팔트 도로 설계에 필요한 기층골재 재료의 비선형 이방성을 고려한 연결함수를 개발하였다. 기층이 비선형 이방성 거동으로 해석되어졌을 경우, 선형 등방성 거동으로 해석되어질 때 나타나는 기층 하부내의 인장력을 감소시켜 보다 현실적인 응력분포를 보이게 된다. 그러나 현재까지 개발된 연결함수들은 대부분 기층이 선형 등방성 거동으로 해석하여 개발된 것이므로, 비선형 이방성 거동을 근간으로 하는 연결함수의 개발이 현실적인 도로 설계를 위해 필요하다. 이 논문에서 개발된 연결함수를 이용하여 도로를 설계한 결과 AASHTO의 연결함수를 이용하여 설계했을 경우보다, 기층 두께가 25mm 감소되는 결과를 보였으며, 이는 AASHTO 도로 설계가 보수적인 설계라는 것을 입증하였다.
        4,000원
        1 2