In this study, Sparassis crispa(cauliflower mushroom), which is rich in beta-glucan, was pulverized using ultrafine grinding technology for its potential utilization as a diverse food ingredient. The physical and antioxidant properties of cauliflower mushroom powder were evaluated at various grinding times. The results showed that as the grinding time of cauliflower mushroom increased, the average particle size significantly decreased (p<0.05). Additionally, the water-holding capacity, swelling capacity, and water solubility index of cauliflower mushroom increased significantly(p<0.05). Based on the analysis mentioned above, cauliflower mushroom prepared as a superfine powder for 5 minutes exhibited superior physical and chemical properties as well as antioxidant characteristics and is expected to be widely used in various foods.

This study compared the physicochemical properties of soybean curd residue and black soybean curd residue produced by hot air-drying and freeze-drying. Regardless of drying method, the crude protein, crude ash, crude fiber contents, pH, L, a, b color values and water soluble index were higher in soybean curd residue, whereas total polyphenol contents and antioxidant activity were higher in black soybean curd residue. Significant differences in water absorption index, oil absorption capacity and emulsion activity were observed between soybean curd residue and black soybean curd residue in freeze-drying. On the other hand, the emulsion stability was not significant difference in both hot-air drying and freezedrying. The crude protein and crude fiber contents of soybean curd residue were not significant difference between hot-air drying and freeze-drying. Freeze-drying resulted in higher crude ash contents, pH, water absorption index, water soluble index, oil absorption capacity, emulsion activity and emulsion stability than hot-air drying. Hot-air drying have caused significantly higher water contents, water activity, total polyphenol contents and antioxidant activity in soybean curd residue than freeze-drying. In conclusion, soybean type and drying methods affect the physicochemical and quality characteristics of soybean curd residue, which could be important factors in the manufacture of processed foods.

Physicochemical properties and storage stability of plant-based alternative meat prepared with low-fat soybean powder (LPAM) treated by supercritical-CO2 and those of full-fat soybean powder (FPAM) were compared. Ash and crude protein contents were higher in LPAM than in FRAM. Water absorption capacity and oil absorption capacity were significantly higher in LPAM than in FPAM. Water binding capacity was higher in LPAM than in FPAM during a 20 days storage period at 5℃ and pH was significantly lower in LPAM than in FPAM after a 5~10 days storage period. Hardness, gumminess and chewiness significantly increased with the increase in the storage period, and the three were significantly higher in LPAM than in FPAM after 10 days and 20 days of storage. The acid value showed no remarkable difference according to the storage period in LPAM; however, it was significantly higher in FPAM than in LPAM after 20 days of storage. The peroxide value and TBA value were significantly increased according to the storage period, and were significantly lower iin LPAM than in FPAM during all the storage periods. Therefore, the use of low-fat soybean powder may be effective in improving oxidative stability during storage in the production of plant-based alternative meat.

A study was conducted on the vitrification of the rare earth oxide waste generated from the PyroGreen process. The target rare earth waste consisted of eight elements: Nd, Ce, La, Pr, Sm, Y, Gd, and Eu. The waste loading of the rare earth waste in the developed borosilicate glass system was 20wt%. The fabricated glass, processed at 1,200℃, exhibited uniform and homogeneous surface without any crystallization and precipitation. The viscosity and electrical conductivity of the melted glass at 1,200℃ were 7.2 poise and 1.1 S·cm−1, respectively, that were suitable for the operation of the vitrification facility. The calculated leaching index of Cs, Co, and Sr were 10.4, 10.6, and 9.8, respectively. The evaluated Product Consistency Test (PCT) normalized release of the glass indicated that the glass satisfied the requirements for the disposal acceptance criteria. Furthermore, the pristine, 90 days water immersed, 30 thermal cycled, and 10 MGy gamma ray irradiated glasses exhibited good compressive strength. The results indicated that the fabricated glass containing rare earth waste from the PyroGreen process was acceptable for the disposal in the repository, in terms of chemical durability and mechanical strength.

FT-IR, GC/MS, and ATR-FT-IR analyses were performed to confirm the physicochemical characteristics of saw palmetto fruit (SPF) extract. FT-IR analysis of the standard product showed that the band corresponding to the carbonyl bond of free fatty acid was stronger than the band of acyl-glyceride. Sample E was identified as having the same trend as the standard sample. Fatty acid composition analysis revealed that the main fatty acids in the standard sample were lauric acid and oleic acid. The content of lauric acid ranged from approximately 30% to 38% in samples B, C, D, and E, while the content of oleic acid ranged from approximately 29% to 34%. The GC/MS analysis confirmed that the standard SPF extract consisted of fatty acids and fatty acid ethyl esters. Sample E demonstrated a similar pattern to the standard samples in terms of oleic acid, lauric acid, and fatty acid esters. ATR-FT-IR analysis indicated that only sample E was predicted to contain 100% saw palmetto extract. Therefore, these study findings can be considered fundamental data for analyzing the physicochemical characteristics of the composition of SPF extract.

A beverage was developed using the Abeliophyllum distichum leaf (AL). The beverage was prepared by adding it to apple juice by concentration, and physicochemical quality, antioxidant activities, and sensory evaluation were measured. Soluble solid and reducing sugar content of the control were 12.57 °Brix and 11.40%, respectively, and there was no difference from the group with addition of the AL extract. However, pH was slightly increased upon addition of AL extract. Lightness and yellowness increased when AL extract was added. Verbascoside content was not detected in the control, but it increased as the concentration of AL extract increased. The contents of ascorbic acid and flavonoids were 5.38 and 20.42 mg%, respectively, and there was no significant difference between the groups. However, the content of polyphenols increased as the concentration of the AL extract increased. DPPH radical and metal ion scavenging activity were increased by addition of the AL extract, but there was no difference in the ABTS radical scavenging activity. As a result of the sensory evaluation, there was no difference from the control even wihen the AL extract was added; thus, it was considered that there was no problem with the degree of acceptability when added within about 300 ppm.

The purpose of this study was to analyze the physicochemical properties by mixing ratio of soybean and peanut protein to secure basic data for developing alternative protein foods. As a result of analyzing the protein molecular weight pattern, it was confirmed that the specific molecular weight was affected by the soybean and peanut protein mixture. The content of glutamic acid, aspartic acid, arginine, glycine, serine, alanine, and tyrosine among nonessential amino acids was higher as the mixing ratio of peanut protein to soy protein was higher. However, the higher the peanut protein mixing ratio, the lower the water absorption capacity. Based on the results of this study, further studies, such as selecting soybean and peanut cultivars for determining the optimal mixing ratio of soybean and peanut protein and processing methods to improve physical properties, are necessary

To enhance the efficacy of Abeliophyllum distichum leaves, extracts were prepared using different solvents for hydrolytic enzyme-treated Abeliophyllum distichum leaves. Physicochemical quality and antioxidant activity were measured. Soluble solids, reducing sugar, ascorbic acid, flavonoids, and polyphenols contents showed the lowest values in the control without enzyme treatment. However, they showed high contents in ethanol extract. In the case of enzyme treatment, their values were higher than those of the control. In particular, verbascoside content increased about 220 times more than that of the control group when treated with enzymes and extracted with 50% ethanol. pH was lowered upon enzymatic treatment. Regarding DPPH radical scavenging activity, for enzyme-free, 25% ethanol extract showed the highest activity among extracts with different solvents. For cellulase and pectinase-treated leaves, water extract showed the highest DPPH radical scavenging activity among extracts with different solvents. For leaves treated with enzyme combination, 50% ethanol extract showed the highest DPPH radical scavenging activity among extracts with different solvents. Regarding ABTS radical scavenging activity, it was generally higher in the 50% ethanol extract than in the water extract and 25% ethanol extract. In particular, verbascoside content was increased when the extract was prepared by co-treatment with enzymes and 50% ethanol.

Makgeolli’s fermentation characteristics and antioxidant and antimicrobial activities were investigated to examine the effect of Prunus mume extract addition. Makgeolli, with the addition of various levels (0, 1, 3, and 5%) of Prunus mume extract (PME), was brewed with fermenting agents, Ipguk and Nuruk. The alcohol content of all samples remarkably increased during the initial 3 days and then gradually increased up to over 18% by the end of fermentation (7 days for Nuruk and 15 days for Ipguk). Although the alcohol content was slightly reduced and acidity was increased with the concentration of PME, there was no other negative effect of PME on the fermentation of Makgeolli. The contents of total phenols and flavonoids for Ipguk samples were higher than those for Nuruk samples, and these values significantly increased at over 3% PME addition. As the PME content increased, the antioxidant activity increased for both Nuruk and Ipguk samples. Only Makgeolli with Ipguk had vigorous antimicrobial activity against E. coli and S. aureus at over 3% addition of PME. These results indicate that PME can be an effective natural additive for enhancing Makgeolli’s antioxidant and antimicrobial activities.

To increase antioxidant activity and physicochemical quality characteristics, four kinds of berries (blueberry (BEB), blackberry (BKB), cranberry (CNB), raspberry (RSB)) with antioxidant activities were used to replace beet (B) in existing ABC juice. In the experimental group, the pH was decreased while the content of soluble solids was increased significantly. Total polyphenol content was significantly increased in all experimental groups compared to that in the control group. The control group had the lowest polyphenol content at 14.723 μg GAE/g, whereas the blackberry replacement group had the highest polyphenol content at 67.12 μg GAE/g. The total flavonoid content was the lowest in the control group at 8.98 μg QE/g but the highest in the blackberry group at 50.47 μg QE/g. All experimental groups showed significantly higher antioxidant activities than the control group. DPPH & ABTS radical scavenging activities were the lowest in the control group at 15.69% and 19.55%, respectively, but the highest in the blackberry group at 48.24% and 59.43%, respectively. SOD-like activity was also the lowest in the control group at 14.12%, but the highest in the blackberry group at 48.18%. When comparing experimental groups, antioxidant activities (DPPH, ABTS, SOD) and antioxidant components (total polyphenols and total flavonoids) were in the order of BKB > CNB > RSB > BEB > Control. In conclusion, the new ABC juice containing four types of berries is enriched in antioxidants with significantly improved antioxidant activities and physicochemical quality characteristics.

This study aimed to investigate the physicochemical characteristics and antioxidant activity of cereal bars containing various concentrations (0, 10, 20, or 30%) of apple pomace (AP). Highest vitamin B1 and C contents were observed in 30% AP-containing bars, but vitamin B2 and B3 contents were highest in the control (0.347 and 3.566 mg/100 g, respectively). Cutting strength decreased significantly in an AP concentration-dependent manner. Total polyphenol and flavonoid contents in 10% AP bars were 2.949±0.157 mg of GAE/g and 1.001±0.009 mg of CE/g, respectively. Antioxidant activities were assessed by measuring free radical scavenging activities, and 10% AP bars had the highest activities, as determined by ABTS (2,2'azino-bis-(3-ethylbenzothiazoline-6-sulfonic acid) and DPPH (α-α-diphenyl-β-picrylhydrazyl) assays (0.412±0.008 and 0.492±0.021 mg GAE/g, respectively). These results suggested that apple pomace should be regarded a potential nutritional and antioxidant source.

고분자 전해질 막 연료전지(polymer electrolyte membrane fuel cell, PEMFC)의 핵심 구성요소 중 하나인 고분자 전해질 막(polymer electrolyte membrane, PEM)은 수소이온을 애노드(anode)에서 캐소드(cathode)로 이동시키는 전해질의 역 할 및 연료의 투과를 막는 분리막으로서의 역할을 수행하며 PEMFC의 성능 및 효율을 결정짓는 핵심 소재이다. 현재 나피온 (Nafion®)으로 대표되는 과불소화계 전해질 막이 높은 수소이온 전도도 및 화학적 안정성으로 인해 상용화 되었지만, 높은 생 산비용과 구동 시 환경오염 물질이 배출된다는 문제점을 갖고 있다. 이를 대체할 PEM 소재로써 고분자의 구조 조절 및 개질 과정이 용이한 다양한 종류의 탄화수소계 고분자가 제시되고 있지만, 실제 PEMFC에 적용되기 위해서는 성능 및 내구 특성 을 개선해야 하는 과제가 남아있다. 이에 본 총설은 탄화수소계 PEM의 성능 및 내구 특성을 향상시키기 위해 1) 가교 구조 를 도입한 가교 막 개발, 2) 무기 첨가제 도입을 통한 유⋅무기 복합 막 개발 및 3) 다공성 지지체를 활용한 강화 복합 막을 개발하는 연구에 대해 살펴보고자 한다.