The sol-gel technique has been studied to fabricate a homogeneous Fe-Mo/MgO catalyst. Ambient effects (air, Ar, and H2) on thermal decomposition of the citrate precursor have been systematically investigated to fabricate an Fe-Mo/MgO catalyst. Severe agglomeration of metal catalyst was observed under thermal decomposition of citrate precursor in air atmosphere. Ar/H2 atmosphere effectively restricted agglomeration of bimetallic catalyst and formation of highly-dispersed Fe-Mo/MgO catalyst with high specific surface-area due to the formation of Fe-Mo nanoclusters within MgO support. High-quality thin-multiwalled carbon nanotubes (t-MWCNTs) with uniform diameters were achieved on a large scale by catalytic decomposition of methane over Fe-Mo/MgO catalyst prepared under Ar-atmosphere. The produced t-MWCNTs had outer diameters in the range of 4-8 nm (average diameter ~6.6 nm) and wall numbers in the range of 4-7 graphenes. The as-synthesized t-MWCNTs showed product yields over 450% relative to the utilized Fe-Mo/MgO catalyst, and indicated a purity of about 85%.

Fe doped TiO2 nanoparticles were prepared under high temperature and pressure conditions by mixture of metal nitrate solution and TiO2 sol. Fe doped TiO2 particles were reacted in the temperature range of 170 to 200˚C for 6 h. The microstructure and phase of the synthesized Fe doped TiO2 nanoparticles were studied by SEM (FE-SEM), TEM, and XRD. Thermal properties of the synthesized Fe doped TiO2 nanoparticles were studied by TG-DTA analysis. TEM and X-ray diffraction pattern shows that the synthesized Fe doped TiO2 nanoparticles were crystalline. The average size and distribution of the synthesized Fe doped TiO2 nanoparticles were about 10 nm and narrow, respectively. The average size of the synthesized Fe doped TiO2 nanoparticles increased as the reaction temperature increased. The overall reduction in weight of Fe doped TiO2 nanoparticles was about 16% up to ~700˚C; water of crystallization was dehydrated at 271˚C. The transition of Fe doped TiO2 nanoparticle phase from anatase to rutile occurred at almost 561˚C. The amount of rutile phase of the synthesized Fe doped TiO2 nanoparticles increased with decreasing Fe concentration. The effects of synthesis parameters, such as the concentration of the starting solution and the reaction temperature, are discussed.

The preparation of Y2O3-doped ZrO2 nanoparticles in Igepal CO-520/cyclohexane reverse micelle solutions is studied here. In this work, we synthesized nanosized Y2O3-doped ZrO2 powders in a reverse micelle process using aqueous ammonia as the precipitant. In this way, a hydroxide precursor was obtained from nitrate solutions dispersed in the nanosized aqueous domains of a microemulsion consisting of cyclohexane as the oil phase, with poly (oxyethylene) nonylphenylether (Igepal CO-520) as the non-ionic surfactant. The synthesized and calcined powders were characterized by thermogravimetrydifferential thermal analysis (TGA-DTA), X-ray diffraction analysis (XRD) and transmission electron microscopy (TEM). The crystallite size was found to nearly identical with an increase in the water-to-surfactant (R) molar ratio. A FTIR analysis was carried to monitor the elimination of residual oil and surfactant phases from the microemulsion-derived precursor and the calcined powder. The average particle size and distribution of the synthesized Y2O3-doped ZrO2 were below 5 nm and narrow, respectively. The TG-DTA analysis showed that the phase of the Y2O3-doped ZrO2 nanoparticles changes from the monoclinic phase to the tetragonal phase at temperatures close to 530˚C. The phase of the synthesized Y2O3-doped ZrO2 when heated to 600˚C was tetragonal ZrO2.

본 연구에서는 메조기공 티타니아/알루미나 막을 솔-젤법을 이용하여 제조하였다. 티타니아/알루미나 막의 기공구조 및 결정상은 하소 온도에 따라 조절될 수 있었다. 티타니아에 알루미나를 첨가하는 것은 티타니아 결정상이 아나타제상에서 루타일상으로 상변화 되는 것을 지연시켜 기공구조의 열적 안정화를 가져왔다. 5번 딥코팅하여 제조된 막의 두께는 10.3mum였으며, 평균 기공크기는 5 nm이었다. 기체 투과 실험 결과는 수소와 질소의 permeance는 각각 17.1×10 -7mol/㎡·s·Pa 및 4.7×10 -7mol/㎡·s·Pa이었다. 이 결과는 Knudsen 확산에 의해 설명될 수 있었다.

Carbon nanotube(CNT) plays an essential role in various fields of nano based science and technology. Recently, silica coated CNT composites are interested because they are useful for the optical, magnetical, and catalytic applications. In this report, carboxyl groups were introduced on the MWCNT using nitric acid. In order to maximize the silica encapsulation efficiency, carboxyl groups of MWCNT reacted with a silane coupling agent were used to prepare silica coated MWCNT. Due to their strong interaction between modified MWCNT and TEOS. Silica layer with a controllable thickness was achieved. Silica coated MWCNT were further utilized as the template for the synthesis of hollow silica nanotubes after 800℃ calcination.

Titanium dioxide (), which is one of the most basic materials in our daily life, plays a key role for environment purification. We synthesized nanoparticles by the hydrolysis reactions of titanium tetraisopropoxide using as a peptizing agent or as a chelating agent in the sol-gel method. The powder consisted of a rod shape or a spherical shape according to the concentration and kind of acid. The physical properties of nanoparticles were investigated with X-ray diffraction, SEM, BET analysis, and UV-Vis spectrophotometer.

Al2O3 has received wide attention with established use as a catalyst and growing application in structural or functional ceramic materials. On the other hand, the boehmite (AlO(OH)) obtained by sol-gel process has exhibited a decrease in surface area during phase transformation due to a decline in surface active site at high temperature. In this work, Al2O3-CuO/ZnO (ACZ) and Al2O3-CuO/CeO (ACC) composite materials were synthesized with aluminum isopropoxide, copper (II) nitrate hemi (pentahydrate), and cerium (III) nitrate hexahydrate or zinc (II) nitrate hexahydrate. Moreover, the Span 80 as the template block copolymer was added to the ACZ/ACC composition to make nano size particles and to keep increasing the surface area. The ACZ/ACC synthesized powders were characterized by Thermogravimetry-Differential Thermal analysis (TG/DTA), X-ray Diffractometer (XRD), Field-Emmision Scanning Electron Microscope (FE-SEM), Bruner-Emmett-Teller (BET) surface analysis and thermal electrical conductivity (ZEM-2:M8/L). An enhancement of surface area with the addition to Span 80 surfactant was observed in the ACZ powders from 105 m2/g to 142 m2/g, and the ACC powders from 103 m2/g to 140 m2/g, respectively.

Transparent conducting aluminum-doped ZnO thin films were deposited using a sol-gel process. In this study, the important deposition parameters were investigated thoroughly to determine the appropriate procedures to grow large area thin films with low resistivity and high transparency at low cost for device applications. The doping concentration of aluminum was adjusted in a range from 1 to 4 mol% by controlling the precursor concentration. The annealing temperatures for the pre-heat treatment and post-heat treatment was 250˚C and 400-600˚C, respectively. The SEM images show that Al doped and undoped ZnO films were quite uniform and compact. The XRD pattern shows that the Al doped ZnO film has poorer crystallinity than the undoped films. The crystal quality of Al doped ZnO films was improved with an increase of the annealing temperature to 600˚C. Although the structure of the aluminum doped ZnO films did not have a preferred orientation along the (002) plane, these films had high transmittance (> 87%) in the visible region. The absorption edge was observed at approximately 370 nm, and the absorption wavelength showed a blue-shift with increasing doping concentration. The ZnO films annealed at 500˚C showed the lowest resistivity at 1 mol% Al doping.

In this study, the silica-based hybrid material with high barrier property was prepared by incorporating ethylene-vinyl alcohol (EVOH) copolymer, which has been utilized as packaging materials due to its superior gas permeation resistance, during sol-gel process. In preparation of this EVOH/SiO2 hybrid coating materials, the (3-glycidoxy-propyl)-trimethoxysilane (GPTMS) as a silane coupling agent was employed to promote interfacial adhesion between organic and inorganic phases. As confirmed from FT-IR analysis, the physical interaction between two phases was improved due to the increased hydrogen bonding, resulting in homogeneous microstructure with dispersion of nano-sized silica particles. However, depending on the range of content of added silane coupling agent (GPTMS), micro-phase separated microstructure in the hybrid could be observed due to insufficient interfacial attraction or possibility of polymerization reaction of epoxide ring in GPTMS. The oxygen barrier property of the mono-layer coated BOPP (biaxially oriented polypropylene) film was examined for the hybrids containing various GPTMS contents. Consequently, it is revealed that GPTMS should be used in an optimum level of content to produce the high barrier EVOH/SiO2 hybrid material with an improved optical transparency and homogeneous phase morphology.

In this study, we investigated the unit process parameters in spherical kernel preparation. Nearly perfect spherical microspheres were obtained from the 0.6M of U-concentration in the broth solution, and the microstructure of the kernel appeared the good results in the calcining, reducing, and sintering processes. For good sphericity, high density, suitable microstructure, and no-crack final microspheres, the temperature control range in calcination process was , and the microstructure, the pore structure, and the density of kernel could be controlled in this temperature range. Also, the concentration changes of the ageing solution in aging step were not effective factor in the gelation of the liquid droplets, but the temperature change of the ageing solution was very sensitive for the final ADU gel particles

2-dimensional silica-silica Continuous Fiber-reinforced Ceramic.matrix Composites (CFCCs) were fabricated by a sol-gel infilitration method that has a changing processing condition, such as the repetitions of infilitration. In order to investigate the relationship between the processing condition and the mechanical properties of composites, the mechanical properties of specimens were measured by means of a 4-point flexural strength test while the evidence of strength degradation were microstructurally characterized. There seemed to be a minimum density value that existed at which the delamination between the fabrics would not occur. In the case that the density of silica CFCCs exceeded 1.55 g/cm3, the flexural strength also exceeded approximately 18 MPa at least. By applying the Minimum Solid Area (MSA) analysis of the porous structure, the correlation between the relative density and the mechanical properties of composites will be discussed.

Multi-elements doped TiO2 was prepared as a new photocatalyst in order to decrease the band gap of TiO2 by sol-gel process which can provide the large active sites of TiO2. Multi-elements were doped by using a single precursor, tetraethylammonium tetrafluoroborate (TEATFB). By the benefit of large specific surface area of TiO2 prepared by sol-gel process, catalysts showed initial fast removal of dye. The photoactivity showed that the doped catalysts significantly promote the light reactivity than undoped TiO2. The commendable photoactivity of prepared catalysts is predominantly attributable to the doping of anions which may reduce the band gap.

In this report, the structural and optical properties of sol-gel derived MgxZn1-xO thin films upon changes in the composition and annealing temperature were investigated. The Mg2+ content and the annealing temperature were varied in the range of 0≤x≤0.35 and 400˚C≤T≤600˚C, respectively. The films exhibited a hexagonal wurtzite structure of a polycrystalline nature. The optical transmittance exceeded 85% and the optical band gap of the film was tuned as high as 3.84 eV at a value of x = 0.35 (annealed at 400˚C), which was evidently the maximum Mg2+ content for the single-phase polycrystalline MgxZn1-xO thin films prepared in this experiment. The optical band gap and photoluminescence emission were tailored to the higher energy side while maintaining crystallinity without a significant change of the lattice constant.

본 연구에서 졸-겔 방법에 의하여 나노 기공을 가지는 세라믹막을 제조하여 단일 조성의 헬륨과 질소를 가지고 기체투과 실험을 수행하였다. 기공 크기 0.1 μm, 기공율 32%의 평막형 α-Al2O3 지지체를 제조하였으며, 지지체를 담지하여 코팅하는 방법으로 4nm의 기공 크기를 가지는 γ-Al2O3 중간층을 제조하였다. 실리카 졸은 TEOS의 산 촉매 가수분해와 축중합반응을 통하여 합성하였다. 막은 딥코팅과 소결과정을 거쳐 제조되었다. 졸-겔 법에 의해 합성된 세라믹 막을 통한 헬륨, 질소 투과 실험은 기체의 투과 특성을 파악하기 위하여 시행하였다. 질소에 대한 헬륨의 선택도는 100∼160 정도였으며 헬륨의 투과도는 303∼363 K의 온도 범위에서 10 -7 mol/m 2 ⋅s⋅Pa 정도였다.

xTiO2-ySiO2 system photocatalysts were developed by sol-gel method based on the change of production parameters, and their structure of crystallization and the specific surface area were measured. Considering the efficiency of the ethanol and phenol degradation using the catalyst, the conclusions were obtained as follows: By means of X-ray analysis of xTiO2-ySiO2 powder that is obtained from Titanium and Silicon alkoxide by sol-gel process, it is shown that crystal structure of anatase type is a dominating structure and, on the other hand, the structure of rutile also partly exists. The increase of SiO2 contents causes the decrease of the degree of crystallization of the gel, whereas the specific surface area preferentially increases. It is shown that more than 90% of ethanol and phenol are degraded when reaction time is about three and an hours, and the maximum degradation rate of ethanol and phenol is shown in 60TiO2-40SiO2 catalyst.

BaTiO3 powders were prepared by sol-gel method from different concentration of KOH aqueous solution and Ba/Ti molar ratio. Particle shape, size and crystal structure of prepared BaTiO3 powders were analyzed by SEM, XRD, and FT-IR. As the result of KOH concentration changing, spherical particles were obtained by condition more than 3 M and particle size decreased as concentration increasing. Different appearance showed between dried and sintered powders against changing of Ba/Ti molar ratio. In case of dried powders, the crystallinity decreased as molar ratio increasing. On the other hand, increased as molar ratio increasing in case of sintered powders.

상변환과 졸-겔 반응을 동시에 행하는 새로운 제막법으로 나노크기의 ZrO2 입자가 함유된 비대칭형 PES-ZrO2 복합 막을 제조하였다. PES-ZrO2 복합 막 제조의 최적 제막 조건을 복합 막에의 인 흡착실험을 수행하여 인 흡착량이 최대가 되는 조건으로서 결정하였는바, 최적 제막 조건은 캐스팅 용액에 1 mL의 PES 당 0.15 mL의 Zr(PrO)4 첨가 및 비용매 1 L에 1 mL Zr(PrO)4 당 30 mL의 HNO3 촉매를 첨가했을 때 이었다. 복합 막의 단면 구조, 막성능 및 ZrO2 입자 함유량 변화를 SEM, 순수투과량, TGA, ICP, XRD 및 접촉각 측정을 통해 결정하였는바, 캐스팅 용액에의 Zr(PrO)4 첨가량이 증가할수록 순수 투과량이 증가하며, ZrO2 입자 함유량은 1 mL의 PES 당 0.15 mL의 Zr(PrO)4 첨가했을 때 최대가 되었다. 복합 막의 표면 특성을 친수성으로 개선하기 위하여 인산처리를 하였으며, 인산처리 전후(前後)의 두 종류 PES-ZrO2 복합 막을 대상으로 한 BSA 용액의 dead-end 한외여과 실험을 수행하여 막오염 형성의 억제 정도를 평가한 결과 인산처리 시킨 복합 막의 경우 투과량과 BSA 배제도 모두 약 40% 정도 증가하였는데 이는 복합 막을 인산처리 시킴으로서 막특성이 친수화 되었기 때문이다.

Silicon carbide whiskers (SiCw) having the diameter in the range of 20-80 nm were synthesised from coconut fibres through sol-gel process. The coconut fibres were impregnated with tetraethoxysilane and methyltriethoxysilane derived sol and pyrolyzed at 1400℃ in argon. X-ray of the pyrolyzed samples showed the formation of β-SiC.