The heat treatment machine based on immersion was developed to reduce temperature difference during netting process and appraised it performance compared current heat treatment machine using high pressure. It was also reviewed the optimum heat treatment procedures for PBSAT monofilament net in accordance with the immersion time and temperature. The procedure was based on physical measurement such as breaking load, elongation and angle of the mesh for PBSAT monofilament. The water temperature gap of the treatment machine based on immersion was less than 1°C. and the energy consumption was also increased in high temperature condition. It was identified that the optimum temperature was 75°C and its optimum processing time was between 15 minutes and 20 minutes to get qualified physical properties.

Swelling of the heat-treated netting for gillnet was estimated through the netting height in square acrylic tank. Experimental Nylon netting and PBSAT netting were heat-treated by using the high-degree vacuum method in hot water after net making. Heat-treatment temperatures were conducted with Nylon netting 105°C and PBSAT netting 62°C, 65°C, 66°C, 67°C. The swelling measurement method of a netting using the square tank was capable of the reduction measurement errors comparing with measurement methods of a mesh inner angle and the shortening rate of a mesh size. In addition, this method was available to comparison evaluation for each netting more easily. Wet type heat-treatment apparatus with high-degree vacuum was shown higher 7∼8°C inner side temperature than a setting temperature. The tensile strength and elongation of Nylon netting and PBSAT netting were shown higher wet condition than dry condition. The tensile strengths of PBSAT monofilaments in dry and wet condition were sharply decreased at heat-treatment temp. 75°C than heat-treatment temp. 74°C

이 연구는 글리시딜 숙시네이트 양이온 제미니 계면활성제의 합성에 관한 것이다. 제미니 계면활성제는 2-메틸 디소디움 숙시네이트와 에피클로로히드린, N, N-디메틸 도데실 아민을 사용하여 합성하였다. FT-IR과 1H-NMR을 통해 물성을 확인하였다. 표면장력과 cmc 측정, 유화력 및 기포력을 각각 주어진 조건을 이용하여 측정하였다. 제미니 계면활성제의 표면장력은 33~34 dyne/cm이며 cmc 값은 10-4~10-3mol/L 였다. 제미니 계면활성제의 유화력은 유기용매에서 더 우수하였고 기포력이 안정한 것을 확인하였다.

유화제만을 사용하는 것 보다 더 좋은 유화특성을 갖는 유화보조제에 관한 연구이다. 그 화합물들은 숙신산과 프로필렌글리콜과의 에스테르화 반응에 의하여 합성되었다. 그 구조는 FT-IR과 1H-NMR 분석으로 확인하였다. 표면장력, 임계미셀농도(cmc), 유화력 등 계면특성을 각각 주어진 조건하에서 시험하였다. 그 수용액의 표면장력은 33-35 dyne/cm 이었고, cmc는 표면장력법에 의하여 산정하였다. 그리고, 유화력은 호호바오일의 경우 우수하였다. 결과적으로 합성한 디프로필렌글리콜 숙시네이트는 O/W 유화에서의 유화보조제로서 응용이 기대된다.

The monofilament with 0.304mm of diameter was produced using a polybutylene succinate (PBS) resin, and a gill net was made by it. We investigated the impact of heat setting temperature on the mechanical properties, knot state and height of gill net. Heat treatment was carried out using the high pressure steam machine for 20 minutes at temperature of 55℃, 60℃, 70℃ and 75℃. Before heat treatment, the strength and elongation of PBS monofilament were estimated to be 48.1kg/mm2, 23.8% at unknot, 37.6kg/mm2, 18.8% at single knot, 26.6kg/mm2, 22.9% at double knot in dry condition, respectively. The strength and elongation of PBS monofilament with double knot were decreased as heat setting temperature increased, and the decreasing rate of strength was showed to be higher than that of elongation. It was not found any differences in strength and elongation of PBS monofilament yarn with double knot at the 65℃ and 70℃ of heat setting temperature by 5% significance of T-test, but there was a significant difference at the 70℃ and 75℃ of heat setting temperature. The net's height and length from leg to leg appeared no differences at the 70℃ and 75℃ of heat setting temperature. In results, it was investigated that the PBS monofilament gill net with the maximized physical properties could be manufactured at 70℃ of heat setting temperature using a high pressure steam machine for 20 minutes.

자연 토양 및 Burkholderia cepacia를 접종한 멸균 토양에 PBSA film을 매립하여 PBSA의 생분해 특성을 조사하였다. 상온에서 80일간 매립 시험을 실시한 결과, 자연 토양에서는 PBSA film의 34.0%, B. cepacia를 접종한 멸균 토양에서는 59.2%의 질량 감소가 일어났으며 PBSA film의 표면 형태 변화도 B. cepacia를 접종한 멸균 토양에 매립한 경우가 자연 토양에 매립한 경우에 비하여 PBSA film

In order to improve the breaking strength and elongation of Polybutylene succinate (PBS) monofilament, the monofilament was produced by blending PBS and Polybutlyne adipate-co-terephthalate (PBAT). The PBS/PBAT blend monofilament was prepared by the melt spinning system, and the weight ratios of the compositions of PBS/PBAT was 100/0, 95/5, 90/10 and 85/15, respectively. The breaking strength, elongation, softness and crystallization of PBS/PBAT blend monofilament were analyzed by using a tensionmeter, softness measurement, X-ray diffractometer in the both dry and wet conditions. The PBS/PBAT blend monofilaments were spun in the take-up velocity of 1.19m/sec under the drawing ratio of 6.8:1 condition. The production volumes of PBS/PBAT blend monofilaments showed 20% less than that of Nylon. The breaking strength of PBS/PBAT blend monofilaments were decreased as PBAT contents increased, while elongation and softness were increased. In case of PBAT content were over 5%, the breaking strength, elongation and softness of PBS/PBAT blend monofilaments were not shown to increase in spite of increasing in PBAT contents. Based on these results, it was possible to make the monofilaments with the maximized physical properties when the PBAT contents at 5%.

A reaction device raising a generation yield by efficiently removing water generated in an esterified reaction between diethylene glycol monoethyl ether and succinic acid with mixture of an azeotropic point was newly developed as a new product in development of more stabilized emulsifier with a semi-solid phase(cream) in an emulsified phase of interfacial activity. The bis-(diethylene glycol monoethyl ether succinate(hereinafter, called as BDGS) with a high yield of more than 95% was obtained. As this has a property containing amphoteric emulsified functions such as W/O type or O/W type, etc., and has a merit that can be used regardless of any emulsified phase, there is no need using other emulsified surfactant. therefore, as this has excellent skin wetability in the cosmetics industry, a product having a wider range in quality compatibility or cost saving, etc. as a humectant has been developed.

우리나라 서울시와 경기도 일대의 토양으로부터 poly(butylene succinate-co-butylene adipate: PBSA)를 분해하는 중온성세균 3주를 분리하였다. 0.01%의 PBSA film이 유일 탄소원으로 첨가된 변형 Sturm test에서 40일간 PBSA의 생분해도는 각 분리균주가 30%, 55% 및 43%를 나타내었으며, 이 중 Bacillus licheniformis PBSA-5의 경우는 PBSA뿐만 아니라 PVA에도 분해 활

Biodegradable polybutylene succinate(PBS) is an environment friendly plastics for fisheries, because it can mitigate the ghost fishing problem caused by gill-net and trap fisheries. To evaluate photodegradability of PBS monofilament in comparison with polyamide(PA) and polyethylene(PE) monofilament, these 3 types of monofilaments were spun and exposed to ultraviolet light(UV) of weather-ometer for 900 hours, and then their modification, crystal structure, strength, and extensibility were analysed. PBS monofilament did not show any crack and maintained its crystal structure after 900 hour exposure to UV whereas PE monofilament began showing cracks and structure modification after 600 hour exposure. Under UV exposure, the strength and extensibility decreased more rapidly in PBS than in PA and PE. We estimate that gill nets made of PBS monofilament can endure for about 1 year. The breaking strength and elongation decreased linearly with the exposure time for the 3 types of monofilaments. The derived regression equations of the residual tenacity(RT, kg/mm2) and the residual extensibility(RE, %) with the exposure time in year(Y) for each monofilament were; PBS : RT=48.598 - 8.6437Y(R2=0.93), RE=28.165 - 7.3233Y(R2=0.98), P A : RT=59.771 - 8.6437Y(R2=0.98), RE=32.198 - 5.2772Y(R2=0.92), P E : RT=60.898 - 5.6528Y(R2=0.98), RE=11.887 - 0.7188Y(R2=0.98).

This study was aimed not only to develop the gill net and trap made of biodegradable monofilaments in order to prevent a ghost fishing and to protect marine ecosystem, but also to analyze their spinning process and physical properties. Results showed that the spinning speed of biodegradable polybutylene succinate(PBS) monofilament was estimated to be approximately 100m/min when spinning temperature and cooling water temperature were adjusted at 180℃ and 3℃, respectively. The breaking loads of PBS monofilaments were estimated to be 35.3kg/mm2 at Φ0.2mm, 46.5kg/mm2 at Φ0.3mm, and 49.7kg/mm2 at Φ0.4mm in the dry condition, respectively. However, its breaking loads in the wet condition were reduced by 2.4-5.5%, compared to those in the dry condition. The knotted strength of PBS monofilament at Φ0.2mm was estimated to be 98.6% of PE in the dry condition. The breaking load of PBS monofilament at Φ0.3mm was evaluated to be 81.8% of PA, and its softness showed 3 times less than that of PA in the wet condition. The breaking load of PBS monofilament at Φ0.4mm was 95.3% of PA, and its softness showed 1.6 times less than that of PA in the wet state. However, the load elastic elongations of two kinds of monofilaments were estimated to be 1% higher than that of PA.

우리나라 20개 지역의 경작토, 쓰레기 매립토, 부엽토 및 활성오니토에서 채취한 40개 토양 시료로부터 Poly(butylene succinate-co-butylene adipate) (PBSA)를 분해하는 미생물을 37℃에서 강화배양과 투명환시험법을 이용하여 PBSA를 분해하는 균주를 선발하였다. 선발한 세균은 16S rDNA 염기서열분석으로 동정한 결과 Streptomyces sp. PBSA-1로 밝혀졌으며 진균은 형태적, 배양적

New anionic oligomeric surfactants, sodium bis(alkyl decaoxyethylene) sulfonated succinates, had been synthesized through the addition reaction of sodium hydrogen sulfite to bis(alkyl decaoxyethylene) maleates. Bis(alkyl decaoxyethylene) maleates were obtained by esterification with maleic anhydride and long chain alkyl decaoxyethylene ethers which were also obtained by addition ethylene oxide 10 mole to straight long chain alcohol with alkyl group having from 10 to 18 carbon atoms, their structure of the synthetic compounds have been characterized with IR. 1H NMR and elemental analysis respectively.