현재 국내외적으로 다양한 강재 댐퍼의 형상에 대한 연구가 이뤄지고 있다. 강재 댐퍼는 제진장치 중 하나로 항복을 통해 지진에너지를 흡수 및 소산하여 본 구조물을 보호한다. 최근 적용되고 있는 면내 전단 변형에 의해 작동하는 댐퍼는 응력이 특정 부위에 집중되어 재료의 대부분이 본래의 역량을 발휘하지 못하는 한계가 있었다. 따라서, 본 연구에서는 이 한계를 극 복하고자 전역 최적화 기법 중 하나인 뻐꾸기 탐색을 적용해 최적 형상을 설계하였다. 탐색된 최적 형상을 토대로 수치해석과 실제 실험을 통한 성능검증을 수행했다. 최적 형상으로 설계된 댐퍼는 안정적인 이력거동을 보이고, 높은 에너지 소산능력을 확 보하는 것으로 나타났다. 본 연구에서는 전역 최적화 기법을 적용한 최적 설계 방법을 제시하고 그 결과를 검증함으로써, 다양한 형태의 공학적 문제 해결에 대한 적용 가능성을 제시하였다.

According to 「Hwangnyongsa Temple Central Column Record」among the remaining documents, under reconstruction the pagoda of Hwangnyongsa&s 9th floor was completed in July 872 on the lunar calendar. At that time, King Kyeongmun worried about sarira under its central column, saying the central column does not move, and then He ordered to lift the central column. So his servants lifted it on November 6th 872 and checked the sarira and put it back on November 25th on the lunar calendar. 「Hwangnyongsa Temple Central Column Record」did not document how to lift the central column which is tens of meters. therefore, this study inferred the way the central column of the pagoda of Hwangnyongsa was lifted in 872, left as a mystery. For that, this study set various hypotheses and it researched and analyzed hoisting technique that is a way to lift the pagoda of Hwangnyongsa and a column. In conclusion, this study inferred the most suitable hoisting technique for the pagoda of Hwangnyongsa at that time, based on the research and analysis of each chapter.

원형질체 융합 기술은 종·속간 유전적 한계를 넘어 육종과 그 소재로 활용하고데 목적이 있다. 본 연구에서는 ‘흑타리’(P. ostreatus)와 ‘호산’(P. pulmonarius)의 단핵균사를 이용하여 원형질체를 나출하고 나출된 원형질체를 융합하여 종간 교배 계통을 육성하였다. 육성계통의 균사생장속도는 ‘호산’, ‘흑타리’, PF160313, PF160306 계통 순으로 빠른 편이었다. 균사 밀도는 PF160306 계통이 가장 높았고, 나머지는 중간 수준의 밀도를 나타내었다. 원형질체 융합계통인 PF160306과 PF160313 계통은 ‘흑타리’ 품종 보다 배양 기간이 10일, ‘호산’ 품종보다 2일 단축되었다. 자실체 생장 기간은 ‘흑타리’와 ‘호산에 비하여 각각 3일, 1일 단축되었다. PF160306 계통의 생산량은 135.9 g/병으로 ‘호산’에 비하여 높았으나 통계적으로 유의차가 없었다. 자실체 발생기간은 15˚C에서 9일, 25˚C에서 4.5일로 온도가 높아짐에 빨라졌다. 자실체의 갓색은 21 o C 노란색이 가장 선명하게 발현되었다. URP primer 7을 사용하여 PCR 밴드 패턴을 비교하였을 때, 전체적으로 ‘호산’ 품종과 유사하였다. DPPH radical 소거능과 폴리페놀 함량에 있어 ‘순정’은 각각 62.5%, 43.5 mg/mL였으며, PF160313 계통은 각각 65.7%, 49.9 mg/mL를 나타내어 계통간 유의차가 있었다. ACE 활성은 ‘순정’ 74%, PF160313 계통 75%로 유사한 수준이었다.

The purpose of this study was to analyze the operators' perception of the allowable price range and the optimal price of kindergarten meals by using the PSM (price sensitivity measurement) technique and provide basic data on calculating kindergarten meal costs reflecting realistic meals. From April to May 2021, 779 kindergartens in Seoul were surveyed, based on 246 (31.6%) of the respondents. According to the survey, kindergarteners spent 3,506 won for meals on average, followed by 3,822 won for kindergarten attached to elementary school, 3,316 won for public kindergartens, and 2,896 won for private kindergartens (p<0.001). The allowed price range for the kindergarten meal service workers was estimated at 3,447~3854 won, 3,447 won for PMC (Point of Marginal Cheapness), and 3,854 won for PME (Point of Marginal Expensiveness). The appropriate cost of the kindergarten meal service provider was 3,950 won for kindergartens attached to elementary school, 3,425 won for public kindergartens, and 3,546 won for private kindergartens.

In this study, a chlorination technique for recycling Li2ZrO3, a reaction product of ZrO2-assisted rinsing process, was investigated to minimize the generation of secondary radioactive pyroprocessing waste. It was found that the reaction temperature was a key parameter that determined the reaction rate and maximum conversion ratio. In the temperature range of 400−600℃, an increase in the reaction temperature resulted in a profound increase in the reaction rate. Hence, according to the experimental results, a reaction temperature of at least 450℃ was proposed to ensure a Li2ZrO3 conversion ratio that exceeded 80% within 8 h of the reaction time. The activation energy was found to be 102 ± 2 kJ·mol−1·K−1 between 450 and 500℃. The formation of LiCl and ZrO2 as reaction products was confirmed by X-ray diffraction analysis. The experimental results obtained at various total flow rates revealed that the overall reaction rate depends on the Cl2 mass transfer rate in the experimental condition. The results of this study prove that the chlorination technique provides a solution to minimize the amount of radioactive waste generated during the ZrO2-assisted rinsing process.

The purpose of this study was to investigate the perception of the quality of school meals by parents of kindergarten children in Seoul, analyze the acceptance price and the optimal school meal cost using PSM (price sensitivity measurement) techniques, and provide basic data for improving the quality of kindergarten meals. The survey was conducted using descriptive statistics and PSM analysis of the responses of 1,272 parents of 779 kindergarten children belonging to the Seoul Metropolitan Office of Education from April to May 2021 and prior research analysis related to kindergarten meals. 74.1% of the parents surveyed were women, with 61% of children attending kindergartens attached to elementary schools, followed by private kindergartens (28.9%) and public kindergartens (10.1%). According to a study of the quality of meals, private kindergarten parents are highly satisfied with all the quality attributes of meals, such as “sanitation of dining environment” and “nutritionally balanced food” (p<0.001, p<0.01). The analysis of the acceptance price range and the optimal price for school meals showed that there was no significant variation based on the type of kindergarten establishment, with parents' acceptance price range ranging from 3,596 won to 4,454 won with an optimal price of 3,948 won.

PURPOSES : This study proposes a method to automatically analyze the shape of asphalt concrete aggregate using computer image analysis technology. METHODS : To develop automatic aggregate shape analysis technology, we developed an aggregate shape boundary analysis algorithm that combines Watershed algorithm and morphology technology. After the algorithm was developed, it was mounted on a separate prototype and compared with the manual aggregate shape analysis method. RESULTS : As a result of the algorithm comparison, the accuracy of the aggregate shape analysis was about 90%, and there was a problem that some noise occurred. This problem was derived from external roughness, the shape of the overlapped aggregate, and sand as the main causes. Therefore, we devised a method to analyze the shape of the aggregate by adjusting the external illuminance constant or using an artificial intelligence model. CONCLUSIONS : The results of this study can be used as basic research data to help improve quality control techniques in the production of asphalt concrete in the future.