실감형 콘텐츠 관련 연구가 활발히 진행되고 있다. AR을 중심으로 한 실감형 콘텐츠의 발전은 스마트 폰을 이용하여 실세계에 3D 가상 콘텐츠를 추가하는 것을 넘어, 대형 건축물에 Projection Mapping을 하는 Media Facade 콘텐츠로 발전되었다. 최근 Projection Mapping을 이용한 Media Facade를 활용한 광고 콘텐츠의 수요가 증가하면서 Projection Mapping콘텐츠에 대한 교육과 시스템개발이 요구 되고 있다. Projection Mapping을 처음 배우는 교육생의 경우, 투사할 사물 및 건축물을 만드는 것부터 큰 어려움으로 작용된다. 사물 및 건축물을 구축하기 위해서는 그만한 자원과 재원이 요구되며, 한번 만들고 나면 다시 자원 을 활용하여 바꾸기 쉽지 않다. 본 논문에서는 Projection Mapping 교육을 위한 Unity 3D Engine 기반 Projection Mapping Simulation을 제안한다. 제안된 Projection Mapping Simulation는 Unity 3D Engine을 기반하였기 때문에 무료로 교육생들이 사용이 가능하며, 다양한 3D Object File를 활용하여 사물 및 건축물을 나타내고 조작할 수 있다. 또한, Projection Mapping에 쓰이는 영상을 Video 뿐 아니라, 실시간 3D Rendering으로 사용할 수도 있다. 본 논문에서 제안한 Projection Mapping Simulation는 교육생들에게 공간과 사 물 및 건축물의 이해를 돋기 위한 실험의 장이 될 것이며, Projection Mapping 콘텐츠 연구 자들에게는 여러 Projection Mapping 기법을 실험 및 연구할 수 있는 장이 되길 희망한다.

There is a Buddhist gong that is hanging in Dongnakwon of Guryongsa temple located in Wongju city, Gangwon-do. This Buddhist gong belongs to the second type of late Joseon period due to have two ridgelines on the front and the sides. In addition this Buddhist gong has six sankrit character ‘ (oṃ)’. The oldest Buddhist gong with Sanskrit characters which was made during late Joseon period is the Buddhist gong made in 1666 with inscription ‘the Kangxi 5th Year of Jangcheonsa temple, in which the five Sanskrit characters of “oṃ ma ṇi pad me” were arranged in the form of a pentagon. But coming to the state the Buddhist gong made in 1770 with inscription ’Qianlong 35 year of Neunggasa temple, four Sanskrit characters of oṃ was changed into a rhombus form. In the Buddhist gong made in 1837 with inscription ’Daogwang 17 year, six Sanskrit character of oṃ was changed into a hexagonal form. The oldest Buddhist gong with six Sanskrit characters was made in 1837 with inscription ‘Dogwang 17th Year’, however, this Buddhist gong was lost. The manufacturing time of the Buddhist gong with the six Sanskrit characters can be set as the lower limit based on the Buddhist gong with inscription Daogwang 17th Year. However, the type of the Buddhist gong of Guryongsa temple belongs to the second type Buddhist gong of the late Joseon Dynasty, and the seconf type Buddhist gongs were mainly produced in the 18th century. Referring to the Buddhist gong of Sokcho Sinheungsa temple made in 1788, although that of Guryongsa temple had no inscriptions that could know the manufacturing time, it appears that the Buddhist gong with six Sanskrit characters prior to the Buddhist gong with inscription Daogwang 17th Year made by Kim Jong-deuk in 1837 was produced in the late 18th century.

현재 농촌은 고령화, 여성화로 인해 기계화가 요구되지만 잡곡류 수확기계의 기계화율은 약 20% 수준으로 확인되어진다. 소요노동력의 절감과 기계화율 제고를 위해 소규모의 경지 조건에 따라 소형 콤바인의 개발이 필요하다. 따라서 본 연구에서는 메밀과 율무를 대상으로 소형 콤바인의 시작기를 제작하여 메밀과 율무 각각의 포장과 수확 작업 시험을 진행하며 작업속도에 따른 각각의 데이터 분석을 진행하였다. 1 m/s 이상의 작업속도에서 메밀의 포장, 수확 시험 결과 전체 손실 비율은 약 21.8%였다. 이 때 가장 높은 비중을 차지한 것은 탈립손실비율이 약 64.1%였고, 다음으로 배진 손실비율이 약 20.9%로 측정되었다. 데이터 분석 결과 탈립손실비율과 배진손실비율에 대해서는 작업속도에 따라 손실율이 높아지는 상관관계 분석 결과가 도출되었고 수집손실비율과 미예취손실비율에 대해서는 작업속도에 따른 각각의 손실율이 감소하는 상관관계를 나타냈다. 메밀의 수확 곡물의 완전립의 비율은 83.2~96.7%로 측정되었으며 작업속도와 상관관계가 없는 것으로 나타났다. 율무의 포장, 수확작업 결과 총곡립손실비율은 전체 작업속도에 대해 평균 약 22.8%가 측정되었다. 작업속도와 손실비율간의 상관관계 분석에서 배진 손실비율을 제외한 다른 손실비율은 양의 상관관계를 나타냈다. 율무의 수확 곡물 품질 분석 결과 완전립의 비율은 작업속도 0.24 ~ 1.05 m/s에서 87.1~95.7%로 측정되었으 며, 손상립과 지경부착립의 비율에서만 양의 상관관계가 있는 것으로 나타났다. 따라서 본 연구에서는 소형 작물을 대상으로한 소형 콤바인 시작기를 제작하였고, 제작된 시작기의 메밀과 율무를 대상으로한 포장, 수확 시험 결과와 이전의 연구들과 비교했을 때 시작기의 성능이 우수한 것을 확인하였 으며 작업속도에 따라 손실에 영향을 끼칠 수 있는 항목을 규명하였다.

Scanning probe microscopy (SPM) has become an indispensable tool in efforts to develop the next generation of nanoelectronic devices, given its achievable nanometer spatial resolution and highly versatile ability to measure a variety of properties. Recently a new scanning probe microscope was developed to overcome the tip degradation problem of the classic SPM. The main advantage of this new method, called Reverse tip sample (RTS) SPM, is that a single tip can be replaced by a chip containing hundreds to thousands of tips. Generally for use in RTS SPM, pyramid-shaped diamond tips are made by molding on a silicon substrate. Combining RTS SPM with Scanning spreading resistance microscopy (SSRM) using the diamond tip offers the potential to perform 3D profiling of semiconductor materials. However, damage frequently occurs to the completed tips because of the complex manufacturing process. In this work, we design, fabricate, and evaluate an RTS tip chip prototype to simplify the complex manufacturing process, prevent tip damage, and shorten manufacturing time.

This study aims to examine the cutting traces remaining on the bracket tie beams of Sungnyemun gate, identifying the tools employed during the late Goryeo to early Joseon periods by specific processes, and deliberating on the timber shaping techniques utilized in advanced architectural construction during the late Goryeo to early Joseon eras. Through the research, it was confirmed that in the production of Sungnyemun Gate's bracket tie beams during the 14th to 15th centuries, both the timber splitting and ripsawing methods were used in conjunction. Moreover, the wood finishing process revealed the use of a plane. It can be inferred that the characteristics of the plane used during that time were not significantly different from those observed in the later period of the Joseon dynasty. The ripsawing and plane finishing techniques were evident in various parts of the bracket tie beams of Sungnyemun gate across the reigns of king Taejo and Sejong, indicating that the techniques involving ripsaw and plane were already prevalent in the late Goryeo period. Consequently, it can be inferred that the ripsawing and plane finishing techniques might have been applied in the construction of prominent government buildings in Hanyang(Seoul), including Gyeongbokgung Palace, and in the residences of royalty and nobility after the establishment of the Joseon dynasty.

금(金, 1115~1234)이 적극적으로 시행했던 관영수공업 체제와 정책에 주목해 금대 동 경(銅鏡)의 새로운 경향과 특징을 고찰하였다. 금에서는 요, 송계로 구분할 수 있는 전통적 인 양식뿐 아니라 이를 바탕으로 폭포, 나무, 암석, 누각 등을 이용해 회화적인 화면구도로 재구성한 금계 동경들이 제작되었다. 원근법과 상하 구도를 적용한 화면 구성이 거울의 한정 된 공간 속에 적용되었고, 마치 한 폭의 그림처럼 선경의 세계를 표현하거나 관폭도와 같이 떨어지는 폭포를 바라보는 장면들이 동경에 표현되었다. 이러한 특징은 12세기 초부터 금의 수도가 세워졌던 상경성 내지(지금의 黑龍江省 阿城 부근)의 관영 공방을 중심으로 제작되 었다. 금 초기부터 관영수공업 체제에서 동경의 주원료인 구리의 원활한 수급을 위해 동경을 제작하였고 동원(銅院), 경자국(鏡子局), 주경소(鑄鏡所)와 같은 관서를 별도로 조직해 체 계적으로 동경을 제작 및 관리하는 정책을 시행하였다. 한편 중앙관청 중에도 공예품의 제작 과 장인의 운영을 담당했던 소부감과 관련이 있고, 그중에서도 금속공예품의 도안을 담당했 던 도화서 소속의 장인과도 관련이 있을 것으로 파악되었다. 금 정부는 실력 있는 외부 장인 들을 정책적으로 상경성에 집중시켰다. 여진의 토착문화와 기타 여러 민족의 외래문화가 상 경성 내지를 중심으로 흡수 및 통합되면서 금만의 새로운 동경들이 제작될 수 있었다.

The global pet market is continuously growing as the number of single-person households increases along with the preponderance of the nuclear family, so pet-related industries are steadily growing. In addition, the market related to the health of companion animals is also increasing significantly. Regarding the health of companion animals, it is reported that the incidence of adult diseases, like humans, is growing mainly due to activities in indoor environments and the lack of exercise due to the lack of time for companion animals. This paper studies the antioxidant properties of Jerusalem Artichoke extract, which can be used as a raw material for functional foods related to adult diseases in companion animals by using substances extracted from Jerusalem Artichokes grown by the first author. Samples to be tested were extracted from hot water extraction and ethanol extraction methods according to conditions. To confirm the antioxidant properties, absorbance analysis, thin-layer chromatography (TLC) analysis, polyphenol measurement, flavonoid measurement, and radical scavenging ability measurement by DPPH were performed to determine whether the raw materials applied in this paper could be used. It was confirmed that Jerusalem Artichoke extract is a suitable additive raw material for functional pet food.

Piezoelectric technology, which converts mechanical energy into electrical energy, has recently attracted drawn considerable attention in the industry. Among the many kinds of piezoelectric materials, BaTiO3 nanotube arrays, which have outstanding uniformity and anisotropic orientation compared to nanowire-based arrays, can be fabricated using a simple synthesis process. In this study, we developed a flexible piezoelectric energy harvester (f-PEH) based on a composite film with PVDF-coated BaTiO3 nanotube arrays through sequential anodization and hydrothermal synthesis processes. The f-PEH fabricated using the piezoelectric composite film exhibited excellent piezoelectric performance and high flexibility compared to the previously reported BaTiO3 nanotube array-based energy harvester. These results demonstrate the possibility for widely application with high performance by our advanced f-PEH technique based on BaTiO3 nanotube arrays.

석유기반 플라스틱의 대체제인 폴리하드록시부틸레이트(polyhydroxybutyrate, PHB)의 기존 추출방법은 분자량 감 소 및 물성 변형을 일으킨다. 본 연구에서는 기능화 된 탄소나노튜브(carbon nanotube, CNT)를 부착한 돌기형 탄소나노튜브 분리막의 여과를 통해 물리적 파쇄를 발생시켜 미생물 내 축적된 PHB를 추출하고자 하였다. 돌기형 탄소나노튜브 분리막의 물리적 파쇄를 확인하기 위해 대장균 용액으로 여과 실험을 수행하여 불활성화를 관찰하였다. 또한 PHB를 축적한 미생물 용 액의 여과를 수행하여 PHB가 추출되었는지 확인하였더니 가장 대표적인 추출방법인 chloroform과 비교하여도 여과로 인한 추출이 4% 높은 성능을 가진 것을 관찰하였다. 본 결과를 통해 친환경적 바이오 플라스틱 회수를 위한 돌기형 탄소나노튜브 분리막의 적용 가능성을 확인하였다.

The purpose of this study is to provide basic data for the production of jackets with high fit by comparing and analyzing the adhesive and non-adhesive production methods of men's jackets. An analysis of the manufacturing method showcased differences between the adhesive and non-adhesive manufacturing methods in the cutting and wick attachment method, the shape and attachment method of the chest reinforcing wick, the sleeve attachment method, and the shoulder pad and sleeve reinforcing cloth attachment method. In evaluating the outfit, the overall fit of the shoulder, the fit of the chest, and the fit of the armpit were found to be high in the non-adhesive production method. In evaluating appearance evaluation, the front shoulder, chest, and sleeve overall appearance showed a high non-adhesive production method. Therefore, in order to increase the wearability of the shoulder pad and the the attachment method of the upper sleeve reinforcing cloth, the non-adhesive production method should be used, and in order to increase the overall wearability and armpit wear of the chest, the difference in the attachment method, and the reinforcement method of the armhole should be used. In addition, to increase the appearance of the jacket, non-adhesive production methods such as differences in wick attachment methods, shoulder pads, sleeve reinforcing cloth, and sleeve attachment methods should be used.

As the demand for p-type semiconductors increases, much effort is being put into developing new p-type materials. This demand has led to the development of novel new p-type semiconductors that go beyond existing p-type semiconductors. Copper iodide (CuI) has recently received much attention due to its wide band gap, excellent optical and electrical properties, and low temperature synthesis. However, there are limits to its use as a semiconductor material for thin film transistor devices due to the uncontrolled generation of copper vacancies and excessive hole doping. In this work, p-type CuI semiconductors were fabricated using the chemical vapor deposition (CVD) process for thin-film transistor (TFT) applications. The vacuum process has advantages over conventional solution processes, including conformal coating, large area uniformity, easy thickness control and so on. CuI thin films were fabricated at various deposition temperatures from 150 to 250 °C The surface roughness root mean square (RMS) value, which is related to carrier transport, decreases with increasing deposition temperature. Hall effect measurements showed that all fabricated CuI films had p-type behavior and that the Hall mobility decreased with increasing deposition temperature. The CuI TFTs showed no clear on/off because of the high concentration of carriers. By adopting a Zn capping layer, carrier concentrations decreased, leading to clear on and off behavior. Finally, stability tests of the PBS and NBS showed a threshold voltage shift within ±1 V.