교량, 터널 등 콘크리트 구조물의 건설 또는 사용 중 사고는 심각한 재산 및 인명 피해를 야기하기 때문에, 콘크리트 구조물의 증가와 동시에 Structural health monitoring(SHM)의 중요성 또한 높아졌 다. 하지만 현재까지 콘크리트 구조물의 안전 관리 및 유지관리는 주로 인력에 의한 육안 점검이 주를 이루고 있으며, 이는 주관적이고 정성적인 관리 수준에 머무르고 있어 안전성 평가 결과에 대한 신뢰 성 및 실시간 상태 파악과 대응 측면에 한계가 존재한다. 이에 본 연구에서는 현재 활발하게 연구되고 있는 탄소나노튜브를 활용하여 기다란 바 형태의 Carbon nanotube reinforced polymer(CNRP) Bar를 개발하였으며, 이를 콘크리트 구조물에 적용하였다. 구조물 변형에 따른 CNRP Bar의 센싱 성능을 파 악하기 위해 3점 굽힘 시험을 진행하였고, 동시에 콘크리트 구조물 내 CNRP Bar의 전기적 변화를 분석하였다. 실험 결과 콘크리트 구조물에 균열 발생 전 굽힘 응력에 의해 CNRP Bar의 저항이 감소 하였고, 균열 발생 후 균열이 커짐에 따라 저항이 증가하는 거동을 보였다. 이를 통해 CNRP Bar는 콘크리트 구조물에 용이하게 적용할 수 있는 매립형 센서로써 사용 가능하고, 이는 콘크리트 구조물의 안전성을 효율적으로 모니터링하는 시스템으로 발전 가능할 것으로 판단된다.

구조물 보수 부위의 손상, 재 박리 등의 2차 피해가 이어지며, 보수 부위의 새로운 거동 평가 기법 에 대한 연구의 필요성이 대두되고 있다. 현재 구조물 보수 부위의 거동을 알기 위해서 주로 인력 중 심의 구조물 외관 검사를 진행하고 있으나, 단편적인 검사 결과를 얻게 되어 지속적이고 세밀한 점검 이 어려운 실정이다. 따라서, 본 연구에서는 탄소나노튜브 기반 폴리머 콘크리트를 활용해 압축과 같 은 외부 응력에 대한 탄소나노튜브 함량별 전기적 변화를 분석하였으며, 균열이 발생한 콘크리트 구조 물을 보수 후 응력을 가해 거동에 따른 전기적 변화를 평가하였다. 압축 시험 결과, 응력에 따른 탄소 나노튜브 기반 폴리머 콘크리트의 전기 저항이 감소하며, 탄소나노튜브 함량이 낮을수록 응력에 대한 저항 감소 폭이 넓게 나타나며 민감도가 증가하였다. 균열 보수 시험 결과, 보수 부위에 응력이 가해 졌을 때 전기 저항이 감소해 앞서 진행된 실험 결과와 동일한 경향을 보였으며, 또한 응력이 가해지지 않을 때 초기 저항으로 회복하는 경향을 보여 구조물 보수 부위 거동에 대한 평가가 가능한 것으로 검 증되었다. 이를 통해, 탄소나노튜브 기반 폴리머 콘크리트는 구조물에 적용이 가능하며, 구조물 보수 후에도 가해지는 응력에 대한 지속적인 감지가 가능해 보수 부위 거동 평가가 가능할 것으로 판단된다.

The purpose of this study is to experimentally analyze the seismic performance of beam-column specimens with vertical irregular, which were reinforced with RHS (Replaceable steel haunch system). a steel haunch system. To evaluate the seismic performance of the RHS, three specimens were manufactured and subjected to cycle loading tests. Retrofitted specimens have different beam-upper column stiffness ratio as a variable. The stiffness ratio of beam-upper column were considered to be 1.2 and 0.84. As a result of the test, the specimen reinforced with RHS showed improved maximum load and effective stiffness, and energy dissipation capacity compared to the non-retrofitted specimen with same beam-upper column stiffness ratio. The specimen with 0.84 beam-upper column stiffness ratio showed improved performance than the specimen with 12.

By developing molds and facilities to horizontally mold the functional part of the dry-cast concrete block, We intend to develop molds and a series of facilities to horizontally mold the functional part of the dry-cast concrete block to increase production per cycle while maintaining existing production methods and major facilities. In order to do so, CAE analysis is first required to develop molds and facilities for horizontally molding the functional part of the drycast concrete block in the horizontal direction. The procedure will be carried out by reviewing the validity of boundary conditions and physical properties, 3D modeling, grid generation, construction of analysis models, model validity, analysis according to frequency changes, and analysis according to physical properties. First, through the comparison of two-point support, three-point support, and two-point and three-point support in the constraint conditions, We would like to compare it with the actual molded product in the horizontal direction. But first of all, it is considered two-point support in the constraint conditions in this paper.

Due to the aging of a building, 38.8% (about 2.82 million buildings) of the total buildings are old for more than 30 years after completion and are located in a blind spot for an inspection, except for buildings subject to regular legal inspection (about 3%). Such existing buildings require users to self-inspect themselves and make efforts to take preemptive risks. The scope of this study was defined as the general public's visual self-inspection of buildings and was limited to structural members that affect the structural stability of old buildings. This study categorized possible damage to reinforced concrete to check the structural safety of buildings and proposed a checklist to prevent the damage. A damage assessment methodology was presented during the inspection, and a self-inspection scenario was tested through a chatbot connection. It is believed that it can increase the accessibility and convenience of non-experts and induce equalized results when performing inspections, according to the chatbot guide.

In this study, the structural performance of the specimen fabricated through 3D printing was evaluated through monotonic loading experiments analysis to apply to 3D printed structures. The compression and flexural experiments were carried out, and the experimental results were compared to the finite element model results. The loading directions of specimens were investigated to consider the capacity of specimens with different curing periods, such as 7 and 28 days. As a result, the strength tended to increase slightly depending on the stacking direction. Also, between the 3D-printed panel composite and the non-reinforced panel, the bending performance depended on the presence or absence of composite reinforcement.

PURPOSES : Advancements in science and technology caused by industrialization have led to an increase in particulate matter emissions and, consequently, severity of air pollution. Nitrogen oxide (NOx), which accounts for 58% of road transport pollutants, adversely affects both human health and the environment. A test-bed was constructed to determine NOx removal efficiency at the roadside. TiO2, a material used to reduce particulate matter, was used to remove NOx. It was applied to a vertical concrete structure using the dynamic pressurized penetration TiO2 fixation method, which can be easily applied to vertical concrete structures. This study was conducted to evaluate the NOx removal efficiency of the dynamic pressurized-penetration TiO2 fixation method in a test-bed under real roadside conditions. METHODS : A test-bed was constructed in order to determine the NOx removal efficiency using the dynamic pressurized penetration TiO2 fixation method on the roadside. The dynamic pressurized-penetration TiO2 fixation method was applied by installing a vertical concrete structure. NOx was injected into the test-bed using an exhaust gas generator. By installing a shading screen, the photocatalytic reaction of TiO2 was suppressed to a maximum concentration of 1000 ppb along the roadside. The removal efficiency was evaluated by measuring NOx concentrations. In addition, illuminance was measured using an illuminance meter. RESULTS : From the results of the analysis of the NOx removal efficiency in the test-bed which the dynamic pressurized type TiO2 fixation method was applied to, an average removal efficiency ranging from 18% to 40% was achieved, depending on the illuminance. Similarly, according to the results of the evaluation of the NO removal efficiency, an average of removal efficiency ranging from 20% to 62% was achieved. Thus, the NOx removal efficiency increased when the illuminance was high. CONCLUSIONS : From the results of the experiment conducted, the efficiency of NOx removal per unit volume was obtained according to the illuminance of TiO2 concrete along an actual road. Field applicability of the dynamic pressurized-penetration-type TiO2 fixation method to vertical concrete structures along roads was confirmed.

A new clamped mechanical splice system was proposed to develop structural performance and constructability for precast concrete connections. The proposed mechanical splice resists external loading immediately after the engagement. The mechanical splices applicable for both large-scale rebars for plants and small-scale rebars for buildings were developed with the same design concept. Quasi-static lateral cyclic loading tests were conducted with reinforced and precast concrete members to verify the seismic performance. Also, shaking table tests with three types of seismic wave excitation, 1) random wave with white noise, 2) the 2016 Gyeongju earthquake, and 3) the 1999 Chi-Chi earthquake, were conducted to confirm the dynamic performance. All tests were performed with real-scale concrete specimens. Sensors measured the lateral load, acceleration, displacement, crack pattern, and secant system stiffness, and energy dissipation was determined by lateral load-displacement relation. As a result, the precast specimen provided the emulative performance with RC. In the shaking table tests, PC frames’ maximum acceleration and displacement response were amplified 1.57 - 2.85 and 2.20 - 2.92 times compared to the ground motions. The precast specimens utilizing clamped mechanical splice showed ductile behavior with energy dissipation capacity against strong motion earthquakes.

본 논문에서는 축하중과 폭발하중을 동시에 받는 철근콘크리트 부재의 구조 거동을 분석하였다. 기본적인 폭발하중을 받는 패널 실험 데이터, 축하중과 폭발하중을 받는 철근콘크리트 기둥 실험데이터를 이용하여 비선형 동적해석 모델링을 검증하였다. 축하중의 적용에 있어서 Autodyn은 동적해석만을 위한 프로그램이기 때문에 축하중과 같은 정적 하중에 대한 초기 응력 상태를 모사하는 해석 절차를 제시하였다. 축하중비 0%~70% 구간과 TNT 등가량에 의존한 환산거리 1.1~2.0에 해당하는 매개변수를 선정하여 총 80개의 비선형 동적 유한요소해석을 진행하였다. 축하중비와 환산거리의 변화를 통해 손상정도와 최대 변위 및 회전각으로 구조 거동을 비 교 분석한 결과로 원거리 폭발하중에서 축하중을 받는 기둥의 강성 증가로 최대 변위가 감소한다. 결과적으로 축하중비 10%~30%, 30%~50%, 50% 이상의 영역 3가지로 구조적 거동 분류가 가능함에 따라 내폭 설계 모델 개발에 활용될 수 있을 것으로 보인다.

The collapse of reinforced concrete (RC) frame buildings is mainly caused by the failure of columns. To prevent brittle failure of RC column, numerous studies have been conducted on the seismic performance of strengthened RC columns. Concrete jacketing method, which is one of the retrofitting method of RC members, can enhance strength and stiffness of original RC column with enlarged section and provide uniformly distributed lateral load capacity throughout the structure. The experimental studies have been conducted by many researchers to analyze seismic performance of seismic strengthened RC column. However, structures which have plan and vertical irregularities shows torsional behavior, and therefore it causes large deformation on RC column when subjected to seismic load. Thus, test results from concentric cyclic loading can be overestimated comparing to eccentric cyclic test results, In this paper, two kinds of eccentric loading pattern was suggested to analyze structural performance of RC columns, which are strengthened by concrete jacketing method with new details in jacketed section. Based on the results, it is concluded that specimens strengthened with new concrete jacketing method increased 830% of maximum load, 150% of maximum displacement and changed the failure modes of non-strengthened RC columns.

철근 콘크리트 하수관거는 경제적 장점과 내구성으로 인해 많이 사용되고 있다. 오랜 공용시간 이후 하수관거는 하 수의 산화물과 공용하중에 의해 열화가 진행된다. 본 논문은 초고강도 콘크리트로 갱생한 열화된 콘크리트 하수관거의 구조적 성능에 대해 연구하였다. 실험변수는 초고강도 콘크리트 관거 상부슬래브와 벽체의 두께의 조합으로 구성하였다. 네가지 종류의 초고강도 콘크리트 관거가 극한하중을 받을 때까지 내하력을 파악하기 위해 실험을 진행하였다. 보통 강도 콘크리트에 비해 상 대적으로 작은 두께의 초고강도 콘크리트 관거는 열화된 내부 부분을 치핑하고 갱생함으로써 단면의 손실을 최소화할 수 있다. 실험결과에 의하면 열화된 콘크리트 관거를 갱생하는데 적용된 새로운 얇은 두께의 초고강도 콘크리트 구조물이 재하하중을 만 족하고 실제 공학적 적용에 용이성을 있음을 나타내고 있다.