본 연구에서는 어선의 운동성능을 향상하기 위해 부착되는 부가물의 조합과 파라미터 변경에 따른 어선의 자유 횡 동요 감쇠 와 저항 성능을 평가하였다. 성능 평가를 위해 전산유체역학(Computational Fluid Dynamics)을 이용한 수치해석을 수행하였으며, 주요 부가 물인 빌지킬과 선저킬의 조합과 치수 변경에 따른 횡 동요 주기와 감쇠 계수의 변화를 확인하였다. 선저킬의 경우 길이가 변화함에 따른 횡 동요 감쇠 계수의 변화가 상대적으로 크지 않음을 확인하였다. 반면 빌지킬의 경우 길이와 각도의 증가에 따라서 횡 동요 감쇠 계수가 증가함을 확인하였다. 4가지 부가물 조합 조건과 나선의 저항 성능을 비교하였으며, 부가물에 의한 어선의 자세와 압력분포의 변화로 인 해 저항이 증가함을 확인하였다. 본 연구 결과를 통해 부가물 크기와 배치가 어선의 운동 및 저항 성능에 미치는 영향을 확인할 수 있었 으며, 어선 적용 시에 도움이 될 수 있을 것으로 기대한다.

본 연구는 과체중과 정상체중의 비글견 사이에서 미네랄 소화율의 차이를 평가하기 위해 수행되었다. 중성화 된 건강한 비글견 11마리(47.7개월령 ±0.14)의 Body condition score (BCS)를 기준으로 Normal BCS 그룹(BCS≤5, n=5)과 High BCS 그룹(BCS ≥6, n=6)의 두 그룹에 배치하였다. 시험사료는 반려견의 영양소 요구량을 충족하도록 제조하여 개체 별 에너지요구량에 맞춰 일일 2회에 나누어 14일 동안 급여하였다. 미네랄의 외관상 전장 소화율은 0.5% 산화크롬(Cr2O3)을 이용한 지시제법을 이용하여 평가되었다. 사료와 분변 내 Macro 미네랄(K, Mg, P, Na, Ca)과 Micro 미네랄(Se, Fe, Zn, Cu, Mn)의 함량은 유도결합플라즈마 분광광도계를 이용하여 분석하였다. 체중과 BCS는 Normal BCS 그룹 보다 High BCS 그룹이 유의하게 높았으며(p<0.01), 시험기간 동안 두 그룹 내 각각의 체중과 BCS는 통계적으로 유의한 변화는 관찰되지 않았다(p>0.05). 미네랄 소화율을 평가한 결과, Macro 미네랄 중에서는 마그네슘, 인, 칼슘의 소화율이 High BCS 그룹에서 높은 경향으로 관찰되었으며(p<0.1), Micro 미네랄 중에서는 High BCS 그룹에서 망간의 소화율이 유의하게 높았고(p<0.05), 셀레늄과 아연의 소화율은 높은 경향(p<0.1)을 나타내었다. 또한, 통계적인 유의성과 관계없이 분석한 모든 미네랄 지표에서 High BCS 그룹이 Normal BCS 그룹보다 높은 소화율의 결과를 보여 주었다. 본 연구의 결과는 비글견에서 과체중 또는 비만이 미네랄 소화율의 변화를 유도할 잠재적 가능성을 보여주었다.

PURPOSES : In this study, surface distress (SD), rutting depth (RD), and international roughness index (IRI) prediction models are developed based on the zones of Incheon and road classes using regression analysis. Regression analysis is conducted based on a correlation analysis between the pavement performance and influencing factors. METHODS : First, Incheon was categorized by zone such as industrial, port, and residential areas, and the roads were categorized into major and sub-major roads. A weather station triangle network for Incheon was developed using the Delaunay triangulation based on the position of the weather station to match the road sections in Incheon and environmental factors. The influencing factors of the road sections were matched Based on the developed triangular network. Meanwhile, based on the matched influencing factors, a model of the current performance of the road pavement in Incheon was developed by performing multiple regression analysis. Sensitivity analysis was conducted using the developed model to determine the influencing factor that affected each performance factor the most significantly. RESULTS : For the SD model, frost days, daily temperature range, rainy days, tropical nights, and minimum temperatures are used as independent variables. Meanwhile, the truck ratio, freeze–thaw days, precipitation days, annual temperature range, and average temperatures are used for the RD model. For the IRI model, the maximum temperature, freeze–thaw days, average temperature, annual precipitation, and wet days are used. Results from the sensitivity analysis show that frost days for the SD model, precipitation days and freeze–thaw days for the RD model, and wet days for the IRI model impose the most significant effects. CONCLUSIONS : We developed a road pavement performance prediction model using multiple regression analysis based on zones in Incheon and road classes. The developed model allows the influencing factors and circumstances to be predicted, thus facilitating road management.

In order to determine fragility curves, the limit state of piers for each damage level is suggested in this paper based on the previous test results in Korea, including our test results. In previous studies, the quantitative measures for damage levels of piers have been represented by curvature ductility, lateral drift ratio, or displacement ductility. These measures are transformed to lateral drift ratios of piers for consistency, and the transformed values are compared and verified with our push-over test results for flexural RC piers with a circular cross-section. The test specimens are categorized concerning the number of lap-splices in the plastic hinge region and whether seismic design codes are satisfied or not. Based on the collected test results in Korea, including ours, the lateral drift ratio for each pier damage level is suggested.

The color image of the brand comes first and is an important visual element that leads consumers to the consumption of the product. To express more effectively what the brand wants to convey through design, the printing market is striving to print accurate colors that match the intention. In ‘offset printing’ mainly used in printing, colors are often printed in CMYK (Cyan, Magenta, Yellow, Key) colors. However, it is possible to print more accurate colors by making ink of the desired color instead of dotting CMYK colors. The resulting ink is called ‘spot color’ ink. Spot color ink is manufactured by repeating the process of mixing the existing inks. In this repetition of trial and error, the manufacturing cost of ink increases, resulting in economic loss, and environmental pollution is caused by wasted inks. In this study, a deep learning algorithm to predict printed spot colors was designed to solve this problem. The algorithm uses a single DNN (Deep Neural Network) model to predict printed spot colors based on the information of the paper and the proportions of inks to mix. More than 8,000 spot color ink data were used for learning, and all color was quantified by dividing the visible light wavelength range into 31 sections and the reflectance for each section. The proposed algorithm predicted more than 80% of spot color inks as very similar colors. The average value of the calculated difference between the actual color and the predicted color through ‘Delta E’ provided by CIE is 5.29. It is known that when Delta E is less than 10, it is difficult to distinguish the difference in printed color with the naked eye. The algorithm of this study has a more accurate prediction ability than previous studies, and it can be added flexibly even when new inks are added. This can be usefully used in real industrial sites, and it will reduce the attempts of the operator by checking the color of ink in a virtual environment. This will reduce the manufacturing cost of spot color inks and lead to improved working conditions for workers. In addition, it is expected to contribute to solving the environmental pollution problem by reducing unnecessarily wasted ink.

본 연구의 목적은 정적 플랭크 운동의 동작 차이에 따른 코어근육의 근활성도를 비교하는 것이 었다. 본 연구의 대상자는 “J”대학교 20대 남성 10명을 대상으로 진행하였고(연령, 23.20±0.65 세; 신장, 174.54±1.51 cm; 체중, 70.00±2.24 kg; 신체질량지수, 22.94±0.51 kg/m2), 4가지의 풀, 엘보우, 사이드 및 리버스 정적 플랭크 동작을 수행하였으며, 근전도 분석을 위한 표면전극 부착 부위는 신체 근육의 우측 복직근, 외복사근, 광배근 및 척추기립근으로 설정하였다. 본 실험 결과, 광배근과 척추기립근의 근활성도 는 리버스 플랭크 동작 시 가장 높게 나타났고(p<.001), 복직근과 외복사근의 근활성도는 엘보우 플랭크 동작 시 가장 높게 나타났다(p<.001). 따라서 본 연구의 결과는 추후 정적 플랭크 동작 시 효과적인 운동 프로그램의 자료가 될 것으로 기대된다.

In this study, the structural analyses were conducted for each model by applying the loads into the design of a large commercial truck seat. Model C with three vertical frames has the smallest total deformation among all models, indicating the strongest stiffness. The maximum total deformation of model C was shown to be 0.68 times smaller than that of model A and 0.79 times smaller than that of model B. The equivalent stress of model C was also shown to be the lowest, indicating the greatest stiffness. The maximum equivalent stress of model C was shown to be 0.8 times smaller than that of model A and 0.91 times smaller than that of model B. At the upper part of the seat or the part where the force was applied, all three models were shown to have the largest total deformations and equivalent stresses. If the result of this study is applied to the design of automotive seat frame, it is thought that the durable and rigid sheets can be manufactured efficiently. By utilizing this study result, the equivalent stress and total deformation are investigated without the real experiment by shape at the seat of large commercial truck, and the durability and rigidity can be seen.

We evaluated the protective effects of cricket methanol extract (CME) on ultra-violet B (UVB)-induced photoaging in human skin fibroblasts. The fibroblast cells were treated with 10, 50, and 100 μg/mL of CME for 24 h, and then exposed to UVB (30 mJ/cm2). CME showed a dose-dependent cytoprotective effect without any observable cytotoxicity. CME reduced UVB-induced production of reactive oxygen species (ROS) by 34.4, 34.9, 40.6% at concentrations of 10, 50, 100 μg/mL respectively. CME inhibited the release of matrix metalloproteinase (MMP) 1 and 3. Furthermore, CME also reduced UVB-induced collagen degradation in the fibroblast cells. Taken together, our data suggests that CME has a significant protective effect on UVB-induced photoaging of the skin. This benefit occurs through multiple mechanisms. The results also suggest a potential role for CME as an ingredient in anti-photoaging cosmetic products in the future.

2016년에 쌍별귀뚜라미는 식품의약품안전처 식품공전에 등록된 식품원료로 가장 큰 장점은 월동 없이 연중 대량 사육이 가능하다는 것과 60% 이상의 단백질 함량이다. 본 연구에서는 사육공간, 인건비 등의 문제로 인하여 귀뚜라미 사육이 불가능할 때를 대비하여 저장조건을 설정하 였으며, 산란율이 높은 산란처 선발과 알의 동종포식률을 조사하였다. 산란은 상토 산란처에서 가장 선호도가 높았으며(p < 0.05), 알의 동종포식 률을 보았을 때 10 L 당 종령 약충 62마리 이하, 1일 동안 산란을 받는 것이 가장 적합한 것으로 판단되었다(p < 0.05). 알의 저온 저장을 하였을 때는 28℃에서 10일간 보관 후 16℃에서 10일간 저온 저장했을 때 부화율이 가장 높았고, 저장을 하지 않았을 때와 비교하였을 때 12~14일 부 화를 연장할 수 있었다(p < 0.05). 쌍별귀뚜라미의 산란처, 산란 방법 및 알 저장조건을 설정함으로써 효율적인 생산방법을 제시하였다.

PartI of this paper identified the location and size of the noise sources from the axial flow fans, and partII based on that, identified the magnitude of sound pressure from the case and the blade according to frequency in the range of 2200 Hz to 5000 Hz. The equation of Lighthill was used for calculation. Generally, when measuring noise, the analytical area was extended more than 1m from the outlet of the fan. To eliminate the effects of backflow coming from the rear of the fan, the analytical area was extended a little longer than 1m. From the results of the analysis, high noise occurs in the low frequency area, and the lower noise becomes in the high frequency area. The maximum sound pressure generated in the range of 2000Hz~5000Hz is 65dB at a distance of 1m and 82dB at the outlet of the fan. Noise of the fan mainly occurred around the blade and guide, and the noise decreased as the frequency increased between 2200Hz and 3400Hz, but the noise increased as the frequency increased between 3800Hz and 5000Hz.

The purpose of this paper is to analyze factors affecting the net income of regional and industrial fisheries cooperatives in South Korea using panel data. This paper utilizes linear or GLS regression models such as pooled OLS model, fixed effects model, and random effects model to estimate affecting factors of the net income of regional and industrial fisheries cooperatives. After reviewing various tests, we eventually select random effects model. The results, based on panel data between 2013 and 2018 year and 64 fisheries cooperatives, indicate that capital and area dummy variables have positive effects and employment has negative effect on the net income of regional and industrial fisheries cooperatives as predicted. However, debt are opposite with our predictions. Specifically, it turns out that debt has positive effect on the net income of regional and industrial fisheries cooperatives although it has been increased. Additionally, this paper shows that the member of confreres does not show any significant effect on the net income of regional and industrial fisheries cooperatives in South Korea. This study is significant in that it analyzes the major factors influencing changes in the net income that have not been conducted recently for the fisheries cooperatives by region and industry.

The pattern of the “bie(别)+V+le(了)” structure is divided into three types: ① “object+bie(别)+V+le(了)” ② “bie(别)+V+object+le(了)” ③ “bie(别)+V+le(了)+object”. These are based on the position of the objects. First, in terms of the negation focus, in pattern ①, the negative focus is the “verb”. In pattern ②, the negative focus is the “object” and in pattern ③, the negative focus is the “whole event”. Second, in terms of the intensity of the negation, pattern ① where the object is at the beginning of the sentence represents very strong negation. However, pattern ② is more to express a kind of dissuasion or proposal and pattern ③ functions as a reminder or acts as a modal marker. In addition, in the “bie(别)+V+le(了)” structure, the object is the definite object that the speaker and the listener know well, so they accept the modification of restrictive elements. Third, in pattern ③, only verbs with a meaning of [+removal] can be used in this pattern and the object should be an object that already exists because “le(了)” corresponds to “diao(掉)”.

Due to global climate change, Korea is experiencing flooding and drought severely. It is hard to manage water resources because intensive precipitation during short periods and drought are commonly occurred in Korea, recently. Severe drought occurred in 2015 and 2017 in the islands, and coastal and inland areas in Korea, and the citizens experienced decreased water supply and emergency water service by using bottled water. Therefore, the Korean government provided additional governmental funds such as the grant of drought disaster. In this study, we tried to calculate the cost of water for drought response based on the cost of tap water for the regional local governments in Korea and the grant of drought disaster by the Ministry of the Interior and Safety in Korea, etc. The estimated costs of water for drought responses in coastal and inland areas which have a chance to apply alternative water sources such as brackish or seawater desalination and water reuse in Korea were higher than in other areas in Korea. Additionally, as the novel approach of drought response, the 300 m3/day-scale desalination vessel was suggested to provide desalinated water for the islands in Korea. The estimated expenses of water supply for the target island areas (Sinan-gun and Jindo-gun) by the desalination vessel was lower than those by emergency water service by using bottled water.

This study examined the changes in the protein and mineral composition of Gryllus bimaculatus fermented with Bacillus substilis and the mycelia of Basidiomycetes. Normal Gryllus bimaculatus (S) and experimental group data obtained after an inoculation of Bacillus substilis (SC) (KACC 19623), Pleurotus eryngii (SP) and Cordyceps millitaris (SC) were compared. The crude protein content of the Gryllus bimaculatus (control) was 75.48%, but it decreased to 64.55, 54.32, and 63.53% after fermentation with SB, SP and SC, respectively (p<0.05). An analysis of the organic elements showed that the contents of the carbon and nitrogen sources were also reduced after fermentation, and the most significant decrease was observed after fermentation with SP. In SDS-PAGE, a 120 kDa and a 48 kDa protein of Gryllus bimaculatus were found. On the other hand, protein bands faded after fermentation with SP and SC, respectively. Moreover, no visible band was observed after fermentation with SB. According to amino acid analysis, the total free amino acid content increased 3.84 and 1.74 times after fermentation with SB and SP, respectively, compared to the corresponding baseline data. In contrast, it decreased by 0.52 times after fermentation with SC. Among the essential amino acids found in crickets fermented with SB, the valine and isoleucine content was 3.57 and 2.64 times higher, respectively, than the recommended daily amount of essential amino acids.

본 연구는 한반도에서 Proto3 모형을 수행하기 위하여 필요한 3가지 기후인자 지도, 1. 식물 내한성 구역, 2. 쾨펜- 가이거 기후구, 3. 연누적강수량 영역에 대한 한반도 지도를 1 km 해상도로 제작하였다. Worldclim V2와 한반도 30 년 평균 기상대 데이터를 이용하여 한반도 최저극값온도 격자를 제작하였으며, 이를 활용하여 한반도 식물 내한성 구역 격자지도를 제작하여 Proto3에 이용하였다. 쾨펜-가 이거 기후구 지도는 Beck et al. (2018)의 쾨펜-가이거 기후구 지도를 Proto3에 적합하게 변형하였으며, 연누적강수량 영역은 Worldclim V2를 활용하여 제작하였다. 제작된 Proto3 기후 인자 지도를 활용하여 외래잡초 별나팔꽃의 정착 확산 가능 지역을 예측한 결과, 남한 대부분의 지역과 북한의 황해도를 포함한 남쪽 지방까지 전체 한반도 격자의 50.7%가 정착, 확산 가능지역으로 예측되었다. 본 결과는 별나팔꽃의 위해성 평가 및 관리 체계 수립 등에 활용가능할 것으로 판단된다.

Outdoor air pollution with particulate matter has become more severe in Korea. Ambient particle concentration affects the indoor environment through various routes through building envelopes. In this study, we investigated particle exposure in residential buildings. Indoor and outdoor particle sources determined the indoor concentrations and particle exposure. This paper measured indoor particles and CO2 concentrations in two different apartment buildings and conducted the survey for 24 hours. The I/O ratio of the occupant awake period was higher than the asleep period. The I/O ratio in the awake period is 0.93-3.65, while the I/O ratio in the asleep period is 0.31- 0.76.Indoor peak events such as cooking or cleaning temporarily increase the I/O ratio and emit the indoor particle sources. Decay rate constant is 0.49-6.84 (1/h) in the indoor peak events during the operation of the exhaust hood and natural ventilation. The size range of 0.3-0.5 μm size is over half for the proportions of emitted particles (55.6%). Daily exposure is divided into indoor sources (45.2%) and outdoor sources (54.8%). We found the differences for the proportion of particle exposure. The ratio of daily exposure in particles for 0.3-0.5 μm size is 43.1 (indoor)/ 56.9 (outdoor) %. However, indoor sources are higher than outdoor sources for the ratio of daily exposure in particles for the 0.5-10.0 μm size.