Observation of Densification Behavior during the Sintering of Ni-added Powder Compacts
The activated sintering behavior of powder compacts with addition of 0.5 and 1.0 wt.%Ni during the sintering under As atmosphere was studied. The shrinkage was measured and the microstructures were observed by SEM (scanning electron microscopy) and BEI (backscattered electron image) along with the phase analysis by EDS during heating up to 155 and holding for various time at 155. The most of shrinkage occurred upon heating and 92% of theoretical density was attained after sintering for 1 hr at 155. However, little shrinkage ensued even for prolonged sintering over 1 hr at 155. A liquid film formed at about 135 along necks and grain boundaries. The polyhedral grain structure composed of and across the grain boundary developed at 155. It was concluded that the activated sintering of powder by Ni led to the diffusion of Si into Ni decreasing the liquidus temperature and the enhanced diffusion of Mo and Si through such a liquid phase and/or interboundary of .