논문 상세보기

STD11의 선삭 시 절삭력 예측 및 요인별 상관계수 도출 KCI 등재

Correlation Coefficients by Factors and Prediction of Cutting Forces When Turning to STD11

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/238178
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국기계기술학회지 (Journal of the Korean Society of Mechanical Technology)
한국기계기술학회 (Korean Society of Mechanical Technology)
초록

In this study, we were turning STD11 and was carried out to presume for mutual relation of turning condition to get optimum cutting force(principal, radial, feed force) and experimental equation by variance, correlation coefficient and multi regression analysis with whisker reinforced ceramic tool. To predict cutting force, analyze principal, radial, feed force with multi-regression analysis. Results are follows: From the analysis of variance, affected factor to cutting force feed rate, depth of cut, cutting speed in order and cutting speed was very small affect to cutting force. From multi-regression analysis, we extracted regression equation and the coefficient of determination(R2) was 0.84, 0.88, 0.7 at principal, radial and tangential force. It means regression equation is significant. From the experimental verification, it was confirmed that princial, radial and tangential force was predictable by regression equation. Through the analysis of the correlation coefficient between each component forces and surface roughness, the principal force was found to have the greatest impact

목차
Abstract
 1. 서론
 2. 실험장치 및 방법
  2.1 실험장치
  2.2 실험방법
 3. 실험 결과 및 고찰
  3.1 주분력(Principal force)
  3.2 배분력(Radial force)
  3.3 이송분력(Feed force)
  3.4 변수 간 상관계수 비교를 통한 주 효과 분석
  3.5 회귀방정식의 검증
 4. 결론
 참고문헌
저자
  • 이이선(BM WORKS 기술연구소) | Rhie, Yi-Seon
  • 배명일(충남대학교 기계금속교육과) | Myung-Il Bae