논문 상세보기
pp.453-461
Several experiments have done to investigate the removal of hydrogen sulfide(H2S) synthetic gas from biogas streams by means of chemical absorption and chemical reaction with 0.1 M – 1 M Fe/EDTA solution. The hydrogen sulfide of biogas was bubbled through an gas-lift column with Fe/EDTA resulting in the formation of sulfur particles. Wide range of optimal operating conditions were tested for both Fe/EDTA solution and the biogas, and the optimal ratio of Fe/EDTA concentration for efficient removal of hydrogen sulfide was found. The roles of Fe/EDTA were studied to enhance the removal efficiency of hydrogen sulfide because of oxidizing by Fe+3/EDTA. The motivation of this investigation is first to explore the feasibility of enhancing the toxic gas treatment in the biogas facility. The biogas purification strategy affords many advantages. For instance, the process can be performed under mild environmental conditions and at low temperature, and it removes hydrogen sulfide selectively. The end product of separation is elemental sulfur, which is a stable material that can be easily disposed of with minor potential for further pollution. The process to address over 90% removal efficiency of hydrogen sulfide does offer considerable advantages unrealized.
