최근, 프리캐스트를 통한 모듈화에 대한 관심으로 인해 교량 및 빌딩 뿐만 아니라, 원전구조물, LNG 가스탱크, 중소형 강합성 구조물 등 특수구조물에도 프리캐스트 모듈화에 대한 연구가 활발하게 이뤄지고 있다. 본 연구에서는 프리캐스트 제작의 시공 및 작업성, 원활한 자재의 조달할 수 있는 방법으로 페로시멘트 (ferrocement)를 바탕으로 한 스틸메쉬로 보강된 모르타르 프리캐스트 패널을 제작하였다. 모르타르는 고강도 및 고유동성을 지니도록 실리카퓸과 고로슬래그의 배합율에 대한 변수연구를 통해 최적의 배합을 선정하였으며, 1,200×600×150mm의 패널을 제작하여 스틸메쉬로 보강한 모르타르 시편과 일반 철근콘크리트 시편을 보강비 2%와 4%로 각각 제작하였다. 제작된 스틸메쉬로 보강한 모르타르의 프리캐스트 모듈화의 적용 가능성을 판단하기 위하여 기본적인 재료물성실험과 자유건조수축실험을 수행하였으며, 선하중으로 하중을 재하하여 3점 휨 시험으로 스틸메쉬로 보강한 모르타르의 구조성능을 검토하였다. 실험결과를 통해, 스틸메쉬로 보강된 모르타르 프리캐스트 패널은 높은 휨성능 및 연성효과가 있으나, 4%로 보강된 스틸메쉬 모르타르 프리캐스트 패널은 전단보강에 대한 고려가 필요하다고 판단되며, 이에 대한 조치가 이루어진다면 프리캐스트 모듈화 부재로 적용이 가능하다고 판단된다.
Recently, researches related to precast modular construction have been actively conducted for nuclear power plant, LNG gas tank, and small-medium PCCV as well as bridges and buildings. In this study, the precast panel cast with steel mesh reinforced mortar (SRM) which is similar reinforced ferrocement was developed for efficient precast construction, construction time reduction, and easy transportation. Mortar mixture with high strength and flowability was obtained from various case studies using silica fume and GGBS. Also, 1,200×600×150mm SRM and reinforced concrete (RC) panels were manufactured with reinforcing ratio of 2% and 4%. To verify structural performance of the SRM specimen, the basic material tests, free shrinkage test, and 3-point flexural test with a line loading were carried out. From the test results, it was determined that SRM specimens showed outstanding flexural capacity and ductility. However, the 4% reinforced SRM specimens must consider shear reinforcing to be used as a precast modular member.