논문 상세보기

항공기 과주방지 포장시스템에 적합한 저강도 펄라이트 콘크리트의 개발 및 적합성 연구 KCI 등재

A Suitability Study and Development of Low Strength Perlite Concrete as Aircraft Rapid Arresting System

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/249814
구독 기관 인증 시 무료 이용이 가능합니다. 4,300원
한국도로학회논문집 (International journal of highway engineering)
한국도로학회 (Korean Society of Road Engineers)
초록

최근 몇 년간 국내 외에서는 연평균 10건 이상의 항공기 과주사고가 발생하고 있으며, 이러한 사고를 방지하고자 활주로 종단안전구역 기준을 설정하였다. 그러나 대부분의 공항은 종단안전구역 기준을 설정하기 전에 시공되어 기존 활주로의 경우 대부분이 활주로 종단안전구역 기준을 만족하지 못하고 있는 실정이며 자연장애물, 환경, 지역개발 등으로 활주로 종단안전구역의 기준에 부합하도록 활주로 종단을 확장하기 곤란한 경우가 많다. 이러한 이유로 미연방항공청은 활주로 종단에 항공기 과주방지 포장시스템을 설치하도록 권고하고 있으며, 현재 많은 미국 공항에서 설치완료 하였거나 설치 중에 있다. 이에 따라 본 논문에서는 국내 기술을 이용하여 항공기 과주방지 포장시스템에 적합한 재료를 개발하기 위하여 저강도 펄라이트 콘크리트의 기초적인 연구를 수행하였다. 저강도 펄라이트 콘크리트의 단위중량은 배합조건에 따라 4.5~6.4kN/m3의 범위를 나타내었으며, 일축압축강도는 400~1,470kN/m2의 강도 범위를 가지고 있었다. CBR 시험기를 이용하여 관입압축강도시험을 수행한 결과 전체 높이에서 관입량이 약 60% 이후부터 강도가 증가하기 시작하였으며, 덤프트럭을 이용하여 관입시험을 수행한 결과 약 40%의 관입량이 측정되었다.

More than 10 different cases of airline overrun accidents happened annually home and abroad in recent years. So the government put the guidelines to protect that kinds of accidents, which is named 'Runway End Safety Area'. However, the great part of airports are far from the standards, because most of the airports have been built before the guidelines. Moreover, in many cases natural obstacles, ambiance, and local area developments obstruct the extension of the runway to meet the criteria. For these reasons, the Federal Aviation Administration (FAA) recommends that the aviation fields construct 'Aircraft Rapid Arresting System(ARAS)' at the end of the runway. Many airdromes have been constructing the system and some airports have already completed the construction. In this research, our team performed a basic study about low strength perlite concrete to provide the proper material with 'ARAS'. As a result, the unit weight of the low strength perlite concrete was 4.5~6.4kN/m3 and uniaxial compressive strength was measured in the range of 400~1,470kN/m2. In addition, we tested penetration compressive strength by using CBR tester, and we observed that the strength was increased after around 60% of penetration rate. Also, 40% of penetration rate was measured through the penetration test with dump trucks.

저자
  • 김춘선 | Kim, Choon-Seon
  • 이영수 | Lee, Young-Soo
  • 하욱재 | Ha, Wook-Jai
  • 한재현 | Han, Jae-Hyun