이상(以上)과 같은 고제(考祭)을 통(通)하여 다음과 같은 결론(結論)을 얻을수 있었다. 1. 각진동차수별(各振動次數別)로 상부구조물(上部構造物)의 길이 변화(變化)에 대한 고유진동수(固有振動數)의 변화(變化)경향을 알수 있다. 2. 같은 구조물(構造物)이던 홀쭉할수록 고유진동수(固有振動數)가 커지고, 커지는 경향은 고차(高次)일수록 터 커진다. 3. 본고(本槁)에서는 두가지 선형(船型)에만 대하여 전달(傳達) matrix 해석법(解析法)으르 검토 고찰 하였으나 그 계산용량(計算容量)이바른 해석법(解析法)보다 훨씬 적음을 감안할때, 본방법(本方法)에 의하여 여러 선형(船型)에 대한 진동자료(振動資料)를 계통적(系統的)으로 계산(計算)하여 두면 방진(防振)자료에 큰 도움이 될것으로 기대된다.

Ship hull Vibration is caused by troubling measure instruments installed in the ship, fatigue of the hull girder. Vibration has been studied by the View point of anti-Vibration. However, the theoretical calculation values of the Vibration analysis were not obtained accurately. Therfore, in this paper, Vibration analysis were made on the two (cylinder form, ship form) of ship hull girder by the transfer matrix method. The super-structure length was determined to be 0, 20, 40, 60, 80, 100, percentage of the ship's length from the stern. The results of analysis by the transfer matrix method are as follow. 1. Natural frequency may be determined by the order of node numbers and superstructure length. 2. Natural frequency inereased when the ship form is a finess and increasing ratio followed by high order of node numbers.

• 홍봉기