논문 상세보기
pp.33-39
Recently the construction of residential building faces many difficulties due to the shortage of building materials and works. Simplifying the stage of processing and assembling reinforcing rods and increasing the efficiency of them in reinforced concrete construction can be used to settle the difficulties. In the respect, structural wire-fabric is utilized. The purpose of this study, instead of deformed steel bars, to examine the utilization of slab joint, which is accompanied with a large deformation in the structure subjected to seismic loads, to suggest reinforcing method which is efficient, easily constructible and structurally safe. The results are as follows ; 1. The ductility capacity of slab reinforced by welded wire fabric was less than with deformed bar in discontinuous slab joint. To enhance the ductility capacity, deformed bar should be used with welded wire fabric for the longitudinal reinforcement. 2. It is avoid to use loop welded wire fabric as the longitudinal reinforcement in wall, because the strength and ductility capacity showed lower value than that with deformed bar. 3. Using welded wire fabric in wall structures, it need deformed bar reinforcement with sufficient anchorage length.
