Recently the construction of residential building faces many difficulties due to the shortage of building materials and works. Simplifying the stage of processing and assembling reinforcing rods and increasing the efficiency of them in reinforced concrete construction can be used to settle the difficulties. In the respect, structural wire-fabric is utilized. The purpose of this study, instead of deformed steel bars, to examine the utilization of slab joint, which is accompanied with a large deformation in the structure subjected to seismic loads, to suggest reinforcing method which is efficient, easily constructible and structurally safe. The results are as follows ; 1. The ductility capacity of continuous slab joints reinforced by welded wire fabric is less than that with deformed bar. But continuous slab joint is reinforced by deformed bar for the longitudinal reinforcement, it is increase strength and ductility capacity. 2. It is recommended that simple cut jointing of welded wire fabric should be avoided in wall-wall joints.