논문 상세보기

급속소결에 의해 제조된 Al2O3/Fe-Ni 나노복합재료의 미세조직 및 기계적 특성 KCI 등재

Microstructure and Mechanical Properties of Al2O3/Fe-Ni Nanocomposite Prepared by Rapid Sintering

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/2728
구독 기관 인증 시 무료 이용이 가능합니다. 4,000원
한국분말야금학회지 (Journal of Korean Powder Metallurgy Institute)
한국분말재료학회(구 한국분말야금학회) (Korean Powder Metallurgy Institute)
초록

A new High Frequency Induction Heating (HFIH) process has been developed to fabricate dense reinforced with Fe-Ni magnetic metal dispersion particles. The process is based on the reduction of metal oxide particles immediately prior to sintering. The synthesized /Fe-Ni nanocomposite powders were formed directly from the selective reduction of metal oxide powders, such as NiO and . Dense /Fe-Ni nanocomposite was fabricated using the HFIH method with an extremely high heating rate of . Phase identification and microstructure of nanocomposite powders and sintered specimens were determined by X-ray diffraction and SEM and TEM, respectively. Vickers hardness experiment were performed to investigate the mechanical properties of the /Fe-Ni nanocomposite.

저자
  • 이영인 | Lee Young-In
  • 이근재 | Lee Kun-Jae
  • 장대환 | Jang Dae-Hwan
  • 양재교 | Yang Jae-Kyo
  • 좌용호 | Cho Yong-Ho