논문 상세보기

고로슬래그와 환원슬래그를 기반으로 한 저에너지양생용 혼합재를 사용한 압출성형패널의 강도특성 KCI 등재

Strength Properties of Extrusion Panel using Low Energy Curing Admixture (LA) based on Ground Granulated Blast-Furnace Slag and Electric Arc Furnace Slag

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/280894
서비스가 종료되어 열람이 제한될 수 있습니다.
한국폐기물자원순환학회지 (Journal of Korea Society of Waste Management)
한국폐기물자원순환학회 (Korea Society Of Waste Management)
초록

Carbon dioxide generated from construction materials and construction material industry among the fields ofconstruction is approximately 67million tons. It is about 30% of the carbon dioxide generated in the fields of construction.In order to reduce carbon dioxide in the fields of construction, it is necessary to control the use of fossil fuel consumedand decrease carbon emission by reducing the secondary and tertiary curing generating carbon dioxide in constructionmaterial industry. Therefore, this study produced an extrusion panel by using cement as the base materials and substitutingbinding materials up to 40% to analyze strength characteristics. According to the results of strength characteristics bythe replacement binder (Low energy curing Admixture) showed an apparent active strength improvement. In particular,specimens substituting binder as 45% indicated the greatest strength improvement. When binding materials was used withsubstitution, it showed strength characteristics similar or higher than specimens made from tertiary autoclave curing assecondary steam curing.

목차
Abstract
 I. 서 론
  1. 연구의 목적
  2. 슬래그(고로슬래그+환원슬래그) 및 압출성형 제품에 관한 연구동향
  3. 양생 배제를 위한 선행연구
 II. 실험 계획 및 방법
  1. 실험 계획
  2. 실험 방법
  3. 양생 방법
  4. 사용 재료
 III. 결과 및 고찰
  1. 함수량 특성
  2. 흡수율 특성
  3. 밀도 특성
  4. 강도 특성
 IV. 결 론
 사 사
 References
저자
  • 김하석(한국건설기술연구원·미래건축연구실) | Ha-Seog Kim Corresponding author
  • 이세현(한국건설기술연구원·미래건축연구실) | Sea-Hyun Lee