Recently, there are a lot of fires breaking out at special structures. To suppress this fire break down at early stage is very important because it leads to bigger damage in case of special structures. For early suppression, outer wall of building has to be destroyed and need waterproofing for Ignition temperature. So far there is no equipment developed local and all of them are imported from a broad. In this study, In this study, The CAE analysis was the Leading-in of the boom conditions for the development of demolition fire according to the environment of Korea. As a result of this, could be confirmed that decreases stress reduction. maximum 51% to 12% depending on the part. It was possible structural integrity and design. about Telescopic Boom and Outrigger on the basis of this result.

Abstract
 1. 서론
 2. 관통 하중 측정 시험
 3. 모델 구성
 4. 유한요소해석
  4.1 하중 및 경계조건
  4.2 파괴반발력 해석결과
 5. 결론
 후기
 References

• 김가을(전북자동차기술원) | K. E. KIM
• 장병춘(경일대학교, 소방방재학과) | B. C. CHANG
• 김영군(전북자동차기술원) | Y. K. KIM
• 노윤식(전북자동차기술원) | Y. S. NO
• 소수현(경일대학교, 소방방재학과) | S. H. SO