Nowadays, the automotive industry has target to improve the fuel consumption due to restricted exhaust gas regulation. For this reason, the applicability of lightweight material, Al alloys, Mg alloys are also being expanded. In this concept, high strength steel, DP780 and light alloy, AL5052 are joined in the right place of the car body. However, it is difficult to join to steel and aluminum by conventional fusion welding. Generally, in respect to dissimilar metal joining by fusion welding, intermetallic compound layer formed at joint interface; hot cracking in generated. To evaluate the welding quality, tensile test and metallographic examination was carried. Especially, correlation between Heat per unit length and formation of intermetallic compound layer was minutely analyzed. Finally, optimal welding condition was selected for improvement of strength at weldment and practical use.

Abstract
 1. 서론
 2. 용접실험 및 결과
  2.1 실험 준비
  2.2 용접 실험
  2.3 실험 결과
 3. 결론
 4. 참고 문헌

• 김지선(한국생산기술연구원 그린가공공정기술센터) | kim ji sun
• 김인주(한국생산기술연구원 그린가공공정기술센터) | kim in ju Corresponding Author