In this study, development of the manufacturing system for the oriental medicine needle was carried through the wire drawing from the wire supply, straightness, heat treatment and surface treatment processes, and finally wire cutting or winding by the online process. As a result, a prototype manufacturing system for the oriental medicine needle wire has been developed. It has been shown that all development targets, such as, straightness, precision, surface roughness, tensile strength, discoloration, noise, diameter range and maximum production speed have been satisfied through the performance test.

1. 서 론
 2. 개발내용 및 방법
  2.1 전체장치 Lay-out
  2.2 선재공급장치
  2.3 신선장치
  2.4 열처리장치
  2.5 C W /C C W 회전장치
  2.6 당김장치
  2.7 텐션조절장치
  2.8 권취장치
  2.9 커팅장치
  2.10 메인 컨트롤 시스템
 3. 결과 및 고찰
 4. 결 론
 후 기
 References

• 김봉석(Member, Gangneung Wonju National University) | B. S. K im Corresponding author