Lifting plan in the large spacial structure is an important factor influencing the efficiency and economy of the construction process. The purpose of this study was deriving the requirements for lifting techniques as the basic research in the double spoke wheel roof structure construction. In the lift up erection method, management plan of the interference error in the column and outer-ring was needed that occur during lifting roof structure. In the bent erection method, material usage reduction plan was required by the structural design of the temporary bent. In the hybrid erection method, lifting plan was needed that minimizes weather condition and crane usage. All lifting techniques were required Value Engineering model for reduction of cost and construction period.

1. 서론
 2. 연성개폐 지붕구조물의 시공프로세스
  2.1 국내 선행 연구 사례 검토
  2.2 국외 연성개폐 시공 사례 분석
  2.3 케이블 텐셔닝 프로세스
 3. 더블스포크 휠 지붕구조물의 Erection(안) 방법 검토
  3.1 더블스포크 휠 지붕구조의 개요
  3.2 Bent 공법 활용한 Erection(안) 방법
  3.3 Lift-up 공법 활용한 Erection(안) 방법
  3.4 복합공법 활용한 Erection(안) 방법
 4. 결론
 References

• 박금성(한국건설기술연구원, 건축도시연구소, 연구위원) | Park Keum-Sung 교신저자
• 김형도(한국건설기술연구원, 건축도시연구소, 수석연구원) | Kim Hyung-Do
• 곽명근(한국건설기술연구원, 건축도시연구소, 수석연구원) | Kwak Myong-Keun