논문 상세보기

주자직 복합재료 미세구조의 응력 및 파괴해석 KCI 등재

Effects of Microstructural Arrangement on the Stress and Failure Behavior for Satin Weave. Composites

  • 언어KOR
  • URLhttps://db.koreascholar.com/Article/Detail/323700
구독 기관 인증 시 무료 이용이 가능합니다. 4,500원
한국전산구조공학회 논문집 (Journal of the Computational Structural Engineering Institute of Korea)
한국전산구조공학회 (Computational Structural Engineering Institute of Korea)
초록

본 논문에서는 일축인장하중을 받고 있는 8-매 주자직 복합재료의 적층 위상변화가 등가물성치 및 응력분포에 미치는 영향을 연구하였다. 등가물성치 및 응력은 임의의 배열을 갖는 적층 구조물에 대한 단위구조 해석을 통해 계산하였으며, 마크로요소를 사용하여 효율적인 계산을 수행하였다. 계산 결과, 섬유다발 미세구조의 변화는 응력분포에 큰 영향을 미치는 것으로 나타났다. 섬유다발 및 수지에서의 응력은 섬유다발의 이동에 따라 서로 다른 분포를 보였고, 수지영역에서의 최대응력은 매우 넓은 범위에 걸쳐 분포하였다.

In this study, the stacking phase shift effect on the effective property and stress distribution was investigated for 8-harness satin weave textile composites under uni-axial tension. Textile configurations with varied phase shifts were modeled by unit cells and repeating boundary conditions were applied at the outer periodic surfaces. The effective property and stress were calculated by the unit cell analysis using macro-element to reduce the computational resource. It was found that stresses were dependent on the variation of tow arrangement of adjacent layers. The in-phase and the shifted configurations showed large differences in the stress distribution pattern. The stress level was very high in the resin region and the distribution of the maximum stresses was widely scattered.

저자
  • 우경식(충북대학교 구조시스템공학과) | Woo, Kyeongsik
  • 서영욱(충북대학교 구조시스템공학과) | Suh, Young-Wook